Interfaces and adapters

7,328 boards

2 layers129.5 × 100 mm
Ql Cumana
alvaroalea/QL_Cumana_FLoppyController
A clone of the Cumana's Disk Interface for the Sinclair QL
40 partsCERN-OHL-S-2.0
2 layers145.4 × 60.3 mm
QL PC0084A keyboard adapter
alvaroalea/QL_PC0084A_keyboard_adapter
A Unknow Keyboard Adapter for the Sinclair QL Computer
26 partsCERN-OHL-S-2.0
2 layers95 × 45.5 mm
Hp5x21 interface
alvarop/hp5x21_mods
It replaces one of the ICs in the counter that used to route the counter data out the printer/logger port in the back and switches the direction.
14 parts
4 layers120 × 50 mm
Isolator
alxgmpr/adum4165-isolator

73 parts
4 layers85 × 72 mm
Carrier panel
alxgmpr/bga67-to-dip48
BGA-67 NAND flash to DIP48 adapter for XGecu programmers, split across a flash carrier and a DIP48 base board
159 parts
2 layers90.7 × 55.4 mm
H bridge V3
ambadran/Revolute_Joint
Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.
57 parts
2 layers46 × 31.3 mm
Serial to WiFi Bridge
ambadran/serial-to-WiFi-Bridge
ESP8266-01 for `socat` to connect TCP session to a /dev/ttyVIRTUAL Port which I can open Anytime to Any Device :D
14 parts
2 layers56.8 × 28.8 mm
Bridge rectifier kicad
ambadyks/internrepo26
chumma irikatte
8 parts
2 layers100 × 100 mm
NGI Battery simulator adapter
ami3go/NGI_Battery_simulator_adapter-v2
Simple PCB adapter for easy wiring from sell cimulator to load
39 parts
2 layers41.7 × 33.5 mm
STM32 breakout board
amolpandit38/STM32_breakout_board

26 parts
2 layers34 × 33 mm
Stm32-usb to uart
amruthavarshinys-ui/stm32-usb-to-uart
STM32-based USB to UART converter (Work in Progress)
32 parts
2 layers90 × 70 mm
STM32 Industrial Edge Gateway v0.2.0
An4s0/STM32-Industrial-Edge-Gateway
Embedded industrial edge gateway for environmental monitoring. Features Modbus RTU over RS485, real-time US EPA AQI computation, FatFs microSD CSV logging, and an embedded lwIP Ethernet web dashboard.
90 parts
2 layers70 × 60 mm
STMt1
Anagha-A26/AMC-Mark-1
KiCad-based 2-layer STM32F401RE evaluation board with USB, UART, SPI, I²C, SWD, GPIO expansion, power regulation, and user interfaces.
45 parts
2 layers21.5 × 25 mm
Anavi rtc-3032
AnaviTechnology/anavi-rtc-3032
ANAVI RTC 3032: an open source hardware real-time clock module with I2C bus interface built around RV-3032-C7.
12 parts
2 layers22 × 53.5 mm
Isolated RS485 Bridge
Anderman/tombask
All message send Slave can send after a poll frame. Slave is ready sending when the last padding byte is 0x55 To write byte 0x08 must be 0x02
22 parts
2 layers21.2 × 22.5 mm
Attiny85
Anderson69s/attiny85
Breakout board for attiny85
6 partsGPL-3.0
2 layers58 × 26 mm
D24V22Fx breakout
AndersonRayner/pcb_pololu_breakouts
Breakout Boards for Pololu PCBs
19 parts
2 layers88 × 68 mm
Teensy breakout
AndersonRayner/teensy_4.0_breakout
Breakout Board for the Teensy 4.0
59 parts
2 layers60 × 25 mm
Jtag 2232h
andrastantos/jtag_2232h

91 parts
2 layers
PCB design
andre-fajar-n/Motor-Speed-Controller
Skill test for position Electrical Embedded Engineer in eFishery
46 parts
2 layers45 × 20 mm
Optical adapter
Andreasdahlberg/multical-403-optical-adapter
This project provides an optical adapter designed for the Kamstrup Multical 403 heat meter, allowing you to interface with it via serial communication.
18 partsCERN-OHL-P-2.0
2 layers59.1 × 50.3 mm
Breakout board
andreashey/ELSYS-1.-Semester-project
This repository is for testing and various small projects
6 parts
2 layers14 × 28 mm
Shelly
AndreTeixeira1998/Shelly-Tasmotizer-PCB
PCB design for serial Tazmotizer programmer for Shelly power modules
26 parts
2 layers54.6 × 24.1 mm
V1 power adapter
andrewpeck/etl-readout-board-pcb

22 parts