

A clone of the Cumana's Disk Interface for the Sinclair QL
- Size
- 129.5 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 137
- Pads
- 389
- Tracks, vias
- 1,216, 106
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Apr 2025
- Updated
- 27 Mar 2026
Overview
Ql Cumana is an open-source printed circuit board by alvaroalea, from the alvaroalea/QL_Cumana_FLoppyController repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 129.5 × 100 mm with 40 parts on 137 nets, routed with 1,216 tracks and 106 vias.
It is built around the 74LS245SC, 27C128-15 and 74LS00SC, with the 74LS04PC, 74LS133PC and 74LS14PC among its other parts. Its parts include 14 capacitors, 14 ICs, 7 resistors, 2 connectors and 1 crystal. It belongs with the interfaces and adapters boards of this library.
Main components
974LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers27C128-15
-0℃~+70℃ 128Kbit 4.5V~5.5V Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS133PC
PDIP-160℃~+70℃ 1 1.1mA 4.75V~5.25V 74LS Series NAND Gate PDIP-16 Logic Gates ROHSTexas InstrumentsLogic Gates74LS14PC
PDIP-14InvertersTexas Instruments74LS273PC
PDIP-201 15ns 27mA 27ns@5V,15pF 30MHz 5ns 74LS Series 8 D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSonsemiFlip Flops74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS85DC
CDIP-16-55℃~+125℃ 10mA 24ns Four channels TTL CDIP-16 Comparators ROHSTexas InstrumentsComparators
README
README.mdCumana Disk Interface for Sinclair QL
A clone of the Cumana's Floppy Disk Interface for Sinclair QL (PCB issue 1, ROM version 1.14)
This board has been suessfully tested with ROM 1.16, real floppy disc and gotek.
The Board
There are two knows version of the ROM, 1.14 and 1.16. unknow diferences between revisiones of ROM.
It use the standar stugart conector, so a plain cable can have up to 4 disk drives, that shall be correctly configured as DS0, DS1, DS2 or DS3.
It use a WD1770 disc controller, but is compatible with WD1772 (you can need to configure start speed), WD1773 is not compatible.
Be aware, when install the transistor, is C,B,E with C near the 7805.
Thanks to Minialler from retrowiki for providing me with a board so I can take pictures and check tracks that allow me to capture the schema.


Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7 |
| 3 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | 74LS06 | Package_DIP:DIP-14_W7.62mm | U7, U8 |
| 1 | 10u/10V Tant. | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 150p | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 16Mhz | Crystal:Crystal_HC18-U_Horizontal | X1 |
| 1 | 220f/16V | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 27C128 | Package_DIP:DIP-28_W15.24mm_Socket | U13 |
| 1 | 2K2 (x6) | Resistor_THT:R_Array_SIP6 | RP1 |
| 1 | 2N2369 | Package_TO_SOT_THT:TO-92S_Wide | TR1 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS133 | Package_DIP:DIP-16_W7.62mm | U11 |
| 1 | 74LS14 | Package_DIP:DIP-14_W7.62mm | U6 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U9 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U14 |
| 1 | 74LS273 | Package_DIP:DIP-20_W7.62mm | U10 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U5 |
| 1 | 74LS85 | Package_DIP:DIP-16_W7.62mm | U4 |
| 1 | 7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | Conn_02x17_Odd_Even | Connector_IDC:IDC-Header_2x17_P2.54mm_Latch_Horizontal | J2 |
| 1 | FDC_WD1770 | Package_DIP:DIP-28_W15.24mm_Socket | U12 |
| 1 | QL_SLOT_DIN41612_CARD | 8bits:DIN41612_B_2x32_Female_Horizontal_THT | J1 |
Similar boards
- 2 layers100 × 85 mm

- 2 layers213.5 × 79.1 mm

- 2 layers141 × 150 mm

- 2 layers229.9 × 86.4 mm

- 2 layers333.2 × 205.9 mm

- 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 4 layers203.2 × 105.4 mm

- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12
Questions
How big is the Ql Cumana PCB?
It measures 129.5 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ql Cumana use?
40 parts, built around the 74LS245SC, 27C128-15, 74LS00SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ql Cumana KiCad files?
From the alvaroalea/QL_Cumana_FLoppyController repository on GitHub, at the commit this page was made from: the board is ql_Cumana.kicad_pcb and its schematic ql_Cumana.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ql Cumana design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).