Skip to the content
2 layers46 × 31.3 mmSerial to WiFi Bridge, the printed circuit board in 3D

Serial to WiFi Bridge

ambadran/serial-to-WiFi-Bridge

ESP8266-01 for `socat` to connect TCP session to a /dev/ttyVIRTUAL Port which I can open Anytime to Any Device :D

Size
46 × 31.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
12
Pads
38
Tracks, vias
111, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 Aug 2024
Updated
15 Aug 2024

Overview

Serial to WiFi Bridge is an open-source printed circuit board by ambadran, from the ambadran/serial-to-WiFi-Bridge repository on GitHub. It is a 2-layer board of 46 × 31.3 mm with 14 parts on 12 nets, routed with 111 tracks and 0 vias.

Its parts include 6 resistors, 2 capacitors, 2 switches and 1 IC. It belongs with the radio and wireless and interfaces and adapters boards of this library.

README

README.md

Serial to WiFi Bridge

Parts

14
QtyValueFootprintReferences
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R6
2JST-2PConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalPowerIN1, Serial1
110nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1200Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1680uFCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC1
1LM317_TO-220Package_TO_SOT_THT:TO-220-3_VerticalU1
1PinHeader_2x4Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalESP8266
1SW_DPDT_x2Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW2
1SW_MEC_5EButton_Switch_THT:SW_PUSH_6mmSW1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Serial to WiFi Bridge PCB?

It measures 46 × 31.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Serial to WiFi Bridge use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Serial to WiFi Bridge KiCad files?

From the ambadran/serial-to-WiFi-Bridge repository on GitHub, at the commit this page was made from: the board is Circuit/Circuit.kicad_pcb and its schematic Circuit/Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Serial to WiFi Bridge design in my own project?

Its repository states no licence, so its author keeps all rights: ask ambadran before reusing the design.