Interfaces and adapters

7,328 boards

2 layers63 × 63 mm
Cubeeee PCB
AndrzejKalinowski/cubeeee_4x4x4_led_cube
4x4x4 LED cube built on a Raspberry Pi Pico 2 — custom KiCad PCB, SolidWorks mechanicals, and a web control UI served from the cube's own USB drive, no software install needed.
25 partsMIT
2 layers45 × 43 mm
Simple breakout
anp369/esp12-battery-breakout
Small breakout board with possibility to run it battery powered. Mirror of https://gitlab.com/anphi/esp12-battery-breakout Report errors there.
44 parts
4 layers31 × 16 mm
Pocket link
anshkumar/pocket-link
Open hardware: a USB-C adapter that lets a Pocket bot hear and speak on an Android phone's own calls. Board (CERN-OHL-P-2.0), RP2040 firmware and protocol (Apache-2.0).
34 partsApache-2.0
2 layers64.2 × 33.6 mm
USB HUB+AUDIO
ANSHUMANDOCX/USB-C-AUDIO-HUB
This is a USB C Hub which had a Audio IN/OUT Along with 3 USB ports.
55 parts
2 layers100 × 80 mm
Torqeedo pcb
antoinem01/torqeedo_motor
Arduino sketch to control a Torqeedo electric outboard motor over RS485, with speed control and safety switches
43 partsGPL-3.0
2 layers
AdapterBoard
AntonKrug/akJtagPlusPlus
C++ experiments around JTAGs
2 partsGPL-2.0
2 layers28.6 × 16 mm
Uart prog
antonloof/uart_prog
a usb2uart programmer for esp32
20 parts
4 layers60 × 35 mm
OpenScent
anxndsgn/OpenScent
an olfactory interface development board
61 parts
2 layers62.3 × 32.9 mm
Programmer-20K ESP
apuder/Programmer-20K
Web-based Programmer for the Tang Primer 20K FPGA
21 parts
2 layers95 × 82 mm
Orc
aramder/orc
Open replacement controller board for surplus Motorola PMUN1046A relay boxes: ESP32-C3, CANopen control, 10 x 15 A channels. Independent project, not affiliated with Motorola Solutions.
85 parts
2 layers60 × 87.8 mm
Hbridge
ardabyilmaz/h-bridge-motor-driver
Discrete MOSFET based H-Bridge motor driver.
47 partsMIT
2 layers70 × 60 mm
Breakout ag1171
ardavast/ajustage

28 partsGPL-3.0
2 layers50 × 50 mm
Genesis SMS Breakout
arithmaldor/Genesis_SMS-Breakout

16 parts
2 layers71.4 × 99.7 mm
RP2350A Macropad
arkandas/rp2350-macropad
RP2350A 3x3 mechanical macropad with a browser-programmable keymap and an on-board status LCD
85 partsMIT
2 layers26.7 × 30.7 mm
NRF24-breakout
armgit5/rf24Breakout
1 layer nrf24 breakout board design in KiCad.
3 parts
2 layers50 × 21.5 mm
LED Brillen Adapter PCB
artandtechspace/LED-Brillen-Projekt
Enthält alle Dateien / Entwürfe / PCB-Modelle der LED Brillen
10 parts
4 layers23.1 × 71.6 mm
Ethernet feather
artemist/ethernet_feather
WIP feather with an MIMXRT10xx and Ethernet
100 parts
2 layers54.9 × 23.5 mm
Stdc14 adapter
arvindsa/stlinkv3-adapter
STVlink3 Adapter
26 parts
2 layers83.1 × 95.3 mm
Datasette bridge
arvjus/Extended_RC6502_Apple1
Flash Disk Storage for RC6502 Apple1 Replica
42 partsMIT
2 layers25.8 × 25.8 mm
Power management breakout
AryA-65/NPM1300-module
Power management module designed to be easily implemented in projects
25 partsMIT
6 layers120 × 40 mm
CM5Carrier
AsadImranRafique/CM5-Carrier-Board
Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.
54 partsApache-2.0
2 layers96.5 × 81.3 mm
Half bridge
asciiio/Stm32_HalfBridge

74 parts
2 layers29.5 × 25.5 mm
TMC2209 Breakout
ASethiPCB/TMC2209_Breakout
TMC 2209 stepper driver breakout board
18 parts
4 layers48.3 × 85.1 mm
Modem breakout
asgar-t/phone_project
custom phone
77 parts