Skip to the content
2 layers96.5 × 81.3 mmHalf bridge, the printed circuit board in 3D
Size
96.5 × 81.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
74
Nets
64
Pads
242
Tracks, vias
579, 32
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
28 Jun 2026
Updated
28 Jun 2026

Overview

Half bridge is an open-source printed circuit board by asciiio, from the asciiio/Stm32_HalfBridge repository on GitHub. It is a 2-layer board of 96.5 × 81.3 mm with 74 parts on 64 nets, routed with 579 tracks and 32 vias.

It is built around the IR2110S-MNS, AMS1117-5.0 and UF4007, with the IRF740 and GBU806 among its other parts. Its parts include 24 resistors, 20 capacitors, 10 ICs, 10 diodes and 6 transistors. It belongs with the interfaces and adapters boards of this library.

Main components

5

README

README.md

Stm32_HalfBridge

Parts

74
QtyValueFootprintReferences
120.1uCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1, C2, C3, C4, C5, C6, C8, C11, C14, C15, C19, C21
9UF4007Diode_THT:D_DO-34_SOD68_P10.16mm_HorizontalD1, D2, D3, D5, D6, D7, D8, D9, D10
610Resistor_SMD:R_0603_1608MetricR13, R14, R15, R16, R17, R18
6150Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6
61kResistor_SMD:R_0603_1608MetricR7, R8, R9, R10, R11, R12
61kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR19, R20, R21, R22, R23, R24
66N137Package_DIP:DIP-8_W7.62mmU1, U2, U3, U4, U5, U6
6IRF740Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4, Q5, Q6
422uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7, C10, C18, C20
333uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC12, C16, C17
3IR2110SPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU7, U8, U9
1+12V_CONNtest:12v_CONNJ1
110uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC9
1220_ACtest:conn_220J2
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U10
1GBU806Diode_THT:Diode_Bridge_Vishay_GBUD4
1OUT_PH_CONNtest:PHASE_3_OUTJ4
1STM_INtest:CONN1x7J3

Similar boards

  • 4 layers100 × 100 mmDeneme2, the printed circuit board in 3D

    Deneme2

    Gokasimov/STM32-FOC-Control

    A completely from-scratch, bare-metal implementation of Field-Oriented Control (FOC) tailored for ultra-low inductance (3 µH) drone motors (e.g., A2212).

    118 parts2MIT
  • 2 layers85.3 × 50.3 mmBeef bridge, the printed circuit board in 3D

    Beef bridge

    anuejn/beef_bridge

    An IGBT-half-bridge-board

    36 parts1
  • 2 layers110.3 × 110.3 mmH Bridge PCB, the printed circuit board in 3D

    H Bridge PCB

    reinto1234/H_Bridge_PCB

    The project consists of two main components: 1. HBridgePCBDesign — KiCad PCB layout and schematic. 2. HBridgePCBCode — Firmware for the ESP32 controller.

    124 parts
  • 2 layers185 × 82 mmDisplay board, the printed circuit board in 3D

    Display board

    Majklzbastlirny/NixieClock

    ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)

    112 parts1GPL-3.0
  • 2 layers157.3 × 86 mmFlyback, the printed circuit board in 3D

    Flyback

    src94/multiple-output-power-supply

    flyback converter with 4 outputs, each 25V

    48 parts1
  • 4 layers240 × 70 mmNixie, the printed circuit board in 3D

    Nixie

    Synthron/Nixie

    A Nixie Clock with Z5600M and ESP32

    324 parts1
  • 2 layers100 × 100 mmPower supply, the printed circuit board in 3D

    Power supply

    gabrielfbdiniz/PFC-Boost-STM32

    Conversor estático de potência CA/CC com Correção Ativa do Fator de Potência (Active PFC) na topologia Boost, projetado para elevar a tensão da rede elétrica retificada (127V / 220V AC) para um barramento CC…

    89 parts
  • 2 layers176 × 82.6 mmHotAirGun, the printed circuit board in 3D

    HotAirGun

    raspibo/HotAirGun

    Hot Air Gun File, 3D, Sch, Pcb, C

    78 parts16

Questions

How big is the Half bridge PCB?

It measures 96.5 × 81.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Half bridge use?

74 parts, built around the IR2110S-MNS, AMS1117-5.0, UF4007 and IRF740. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Half bridge KiCad files?

From the asciiio/Stm32_HalfBridge repository on GitHub, at the commit this page was made from: the board is half_bridge_scheme/half_bridge.kicad_pcb and its schematic half_bridge_scheme/half_bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Half bridge design in my own project?

Its repository states no licence, so its author keeps all rights: ask asciiio before reusing the design.