Skip to the content
12

UF4007

MDDExtended

-50℃~+150℃ 1.7V@1A 1A 1kV 30A 5uA@1kV 75ns DO-41 Fast Recovery / High Efficiency Diodes ROHS

Part id
mdd/UF4007
Category
Fast Recovery, High Efficiency Diodes
Package
DO-41
Pins
2
In stock
161,763 at JLCPCB (C960666)
Used on
59 open-source boards

Overview

The UF4007 is a fast Recovery, High Efficiency Diode made by MDD in a DO-41 package with 2 pins. -50℃~+150℃ 1.7V@1A 1A 1kV 30A 5uA@1kV 75ns DO-41 Fast Recovery / High Efficiency Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D, from KiCad's library) and its footprint (EasyEDA_Pro:do-41_bd2.4-l4.7-p8.70-d0.9-fd, from EasyEDA Pro), ready for a KiCad board. 161,763 are in stock at JLCPCB (part C960666). 59 open-source boards in 49 repositories on GitHub use it.

Symbol

Device:DFrom KiCad's library

Footprint

12
EasyEDA_Pro:do-41_bd2.4-l4.7-p8.70-d0.9-fdFrom EasyEDA Pro

From the datasheet

5
Reverse voltage, most
1 kV · Maximum repetitive peak reverse voltage · p. 1
Forward current, most
1 A · Maximum average forward rectified current at TA=55°C, 0.375 inch lead length · p. 1
Forward voltage
1.7 V · Maximum instantaneous forward voltage at 1.0A · p. 1
Junction, hottest
150 °C · Maximum operating junction temperature · p. 1
Junction to air (DO-41)
50 K/W · Typical junction to ambient, 0.375 inch lead length, P.C.B. mounted · p. 1

What it is and has

4
Switching
Ultra fast switching for high efficiency · p. 1
Reverse leakage
Low · p. 1
Forward surge current
High capability · p. 1
Package
JEDEC DO-41 molded plastic body · p. 1

Specifications

12
ParameterConditionsAs printedPage
Maximum repetitive peak reverse voltage VRRMMDD UF4007; TA=25°Cmax 1000 V1
Maximum RMS voltage VRMSMDD UF4007; TA=25°Cmax 700 V1
Maximum DC blocking voltage VDCMDD UF4007; TA=25°Cmax 1000 V1
Maximum average forward rectified current I(AV)MDD UF4007; 0.375”(9.5mm) lead length at TA=55°C; single phase half-wave 60Hz, resistive or inductive load; for capacitive load current derate by 20%max 1 A1
Peak forward surge current IFSMMDD UF4007; 8.3ms single half sine-wave superimposed on rated load (JEDEC Method); TA=25°Cmax 30 A1
Maximum instantaneous forward voltage at 1.0A VFMDD UF4007; TA=25°Cmax 1.7 V1
Maximum DC reverse current IRMDD UF4007; at rated DC blocking voltage; TA=25°Cmax 5 uA1
Maximum DC reverse current IRMDD UF4007; at rated DC blocking voltage; TA=100°Cmax 50 uA1
Maximum reverse recovery time trrMDD UF4007; TA=25°C; IF=0.5A, IR=1.0A, Irr=0.25Amax 75 ns1
Typical junction capacitance CJMDD UF4007; TA=25°C; measured at 1MHz and applied reverse voltage of 4.0V D.C.typ 15 pF1
Typical thermal resistance RθJAMDD UF4007; DO-41; junction to ambient at 0.375”(9.5mm) lead length, P.C.B. mountedtyp 50 °C/W1
Operating junction and storage temperature range TJ,TSTGMDD UF4007min -50 · max 150 °C1

Open-source boards using it

59See all 59
  • 2 layers68 × 89 mmParanoiaBox, the printed circuit board in 3D

    ParanoiaBox

    profdc9/ParanoiaBox

    A standalone elliptic curve/AES file encryption and decryption device

    60 parts17
  • 2 layers96.3 × 98 mmAquarium, the printed circuit board in 3D

    Aquarium

    baranovskiykonstantin/aquarium

    Control the lighting and the heating of the aquarium.

    73 parts11
  • 2 layers100 × 70 mmMotorDriver, the printed circuit board in 3D

    MotorDriver

    JeyRunner/actonator

    3D printable robot actuator with belt-driven gearbox and custom FOC driver board.

    177 parts10MIT
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 4 layers147.8 × 77 mm2xBLDCPicoV3, the printed circuit board in 3D

    2xBLDCPicoV3

    AmericanRework/Pico-2x-BLDC

    One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.

    135 parts7
  • 2 layers373 × 132.3 mmSolarinverter, the printed circuit board in 3D

    Solarinverter

    cpipero/solarinverter

    Kicad Project to build a programmable Solar Inverter

    370 parts5CC0-1.0
  • 2 layers329.9 × 146.6 mmBabyHuey, the printed circuit board in 3D

    BabyHuey

    tristancollins/HiFi-BabyHuey

    An "Engineer's" Baby Huey EL34 PCB

    201 parts5
  • 2 layers30 × 100 mmMoskill, the printed circuit board in 3D

    Moskill

    telagod/moskill

    MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp

    95 parts2

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the UF4007?

Yes. The symbol is Device:D and the footprint EasyEDA_Pro:do-41_bd2.4-l4.7-p8.70-d0.9-fd, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UF4007?

DO-41, with 2 pins. Its footprint is drawn on this page.

Where is the UF4007 datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the UF4007?

JLCPCB lists it as part C960666, with 161,763 in stock; the sellers' links on this page open their listings.

What can replace the UF4007?

Parts like it in the library: the FR107 by MDD and the MUR1100E by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UF4007?

59 boards in 49 repositories on GitHub; the most starred are listed on this page, with their KiCad files.