2 layers180 × 120 mm
OBeMs Pulse PCB
johnbeardmore/oBeMS
Open source environmental monitoring, automatic meter reading and building management system.
140 parts3LGPL-3.0
2 layers176 × 82.6 mm
HotAirGun
raspibo/HotAirGun16Hot Air Gun File, 3D, Sch, Pcb, C
- Size
- 176 × 82.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 94
- Pads
- 283
- Tracks, vias
- 577, 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Mar 2017
- Updated
- 31 Jul 2019
Overview
HotAirGun is an open-source printed circuit board by raspibo, from the raspibo/HotAirGun repository on GitHub. It is a 2-layer board of 176 × 82.6 mm with 78 parts on 94 nets, routed with 577 tracks and 5 vias.
It is built around the BTA08, LM2575T-5 and MAX6675ISA+, with the MCP23017-E/SS, MOC3023M and BA159 among its other parts. Its parts include 20 resistors, 11 diodes, 10 connectors, 6 capacitors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8BTA08
TO-220FTO-220F Thyristors (SCR)/Modules ROHSHANGYU MICROELECTRONICSThyristors (SCR)/Modules
LM2575T-5
TO-220-5-40℃~+125℃@(TJ) 1 1A 4.75V~40V 52kHz 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSonsemiDC-DC Converters
MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - Specialized
MCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O Expanders
MOC3023M
DIP-6-40℃~+85℃ 1 1.15V 100mA 1A 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
BA159
DO-41-55℃~+125℃ 1 Independent 1.3V@1A 1A 1kV 300ns 5uA DO-41 Fast Recovery / High Efficiency Diodes ROHSluJingFast Recovery / High Efficiency Diodes
IRF740
TO-220-55℃~+175℃ 1 N-channel 1.162nF 100W 10A 17pF 32nC@10V 400V 4V 500mΩ@10V N-Channel TO-220 MOSFETs ROHSMinosMOSFETs
TLP627(F)
DIP-4-55℃~+100℃ 1 1.15V 1.2V@100mA,10mA 150mA 15us@10mA,100Ω 300V 40us@10mA,100Ω 5kV DC Darlington Transistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output Optoisolators
README
kicad/README.mdAvvertenza sul caricamento dei simboli
All'apertura dello schema kicad può richiedere di sostituire i simboli dei componenti come se si riferissero a librerie obsolete.
E' consigliabile annullare l'operazione in modo che venga caricato il simbolo presente nel file cache delle librerie.
Schema preview
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470R | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R14, R16, R17 |
| 4 | 10K | Resistors_SMD:R_0603_HandSoldering | R4, R5, R6, R19 |
| 3 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | J2, J9, J10 |
| 3 | LOGO | Msystem:LOGO | G***, G***, G*** |
| 2 | 2K2 | Resistors_SMD:R_0603_HandSoldering | R13, R15 |
| 2 | 8K2 | Resistors_SMD:R_0603_HandSoldering | R8, R9 |
| 2 | LED | LEDs:LED-5MM | D1, D2 |
| 1 | 100k | Discret:D4 | R10 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C3 |
| 1 | 100nf | Capacitors_SMD:C_0603_HandSoldering | C6 |
| 1 | 100pF | Capacitors_SMD:C_0603_HandSoldering | C4 |
| 1 | 100uF | Capacitors_THT:CP_Radial_D12.5mm_P7.50mm | C1 |
| 1 | 10K | Potentiometers:Potentiometer_VishaySpectrol-Econtrim-Type36M | RV1 |
| 1 | 10uF | Capacitors_THT:CP_Radial_D10.0mm_P5.00mm | C5 |
| 1 | 12K | Resistors_SMD:R_0603_HandSoldering | R18 |
| 1 | 1N4007 | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D11 |
| 1 | 1N5819 | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D9 |
| 1 | 270R | Resistors_SMD:R_0603_HandSoldering | R20 |
| 1 | 2A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_Schurter_0031_8201 | F1 |
| 1 | 330R | Discret:R3 | R12 |
| 1 | 330R | Resistors_SMD:R_0603_HandSoldering | R11 |
| 1 | 330uH | Msystem:Induttanza | L2 |
| 1 | 360R | Resistors_SMD:R_0603_HandSoldering | R7 |
| 1 | 470uF | Capacitors_THT:CP_Radial_D12.5mm_P7.50mm | C2 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | XA1 |
| 1 | BA159 | Discret:D4 | D10 |
| 1 | BTA08 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | D4 |
| 1 | Buzzer | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CONN_02X02 | Pin_Headers:Pin_Header_Straight_2x02 | J3 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | J1 |
| 1 | Choke_SMD_PISR_Handsoldering_FASTRON | Choke_SMD:Choke_SMD_PISR_Handsoldering_FASTRON | |
| 1 | D_Bridge_+-AA | Msystem:Diode_Bridge_8.5 | D3 |
| 1 | FINDER-40.52 | Msystem:Relay_SPDT_Schrack-RT1_RM5mm | RL1 |
| 1 | Foot Switch | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J8 |
| 1 | HAG Resistor | Connectors_Phoenix:PhoenixContact_MSTBVA-G_02x5.08mm_Vertical | J4 |
| 1 | IRF740 | TO_SOT_Packages_THT:TO-220_Vertical | Q3 |
| 1 | LCD16X2 | Display:WC1602A | DS1 |
| 1 | LED | LEDs:LED-3MM | D5 |
| 1 | LM2575 | TO_SOT_Packages_THT:Pentawatt_Neutral_Staggered_Verical_TO220-5-T05D | U3 |
| 1 | L_Core_Ferrite | Inductors_THT:L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm | L1 |
| 1 | Led_Bl | LEDs:LED-3MM | D7 |
| 1 | Led_Gr | LEDs:LED-3MM | D8 |
| 1 | Led_Ye | LEDs:LED-3MM | D6 |
| 1 | MAX6675 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | MCP23017 | Housings_DIP:DIP-28_W7.62mm_LongPads | U1 |
| 1 | MOC3023M | Housings_DIP:DIP-6_W7.62mm | U2 |
| 1 | PWR_IN | Connectors_Phoenix:PhoenixContact_MSTBVA-G_03x5.08mm_Vertical | J5 |
| 1 | PWR_Suply | Connectors_Phoenix:PhoenixContact_MSTBVA-G_02x5.08mm_Vertical | J6 |
| 1 | Polyfuse_Small | Fuse_Holders_and_Fuses:Fuse_TE5_Littlefuse-395Series | F2 |
| 1 | Q_NPN_CBE | TO_SOT_Packages_THT:TO-92_Rugged_Reverse | Q1 |
| 1 | Q_PNP_CBE | TO_SOT_Packages_THT:TO-92_Rugged | Q2 |
| 1 | Rotary_Encoder_Switch_V2 | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 1 | Start | Buttons_Switches_THT:SW_PUSH_SMALL | SW1 |
| 1 | Stop | Buttons_Switches_THT:SW_PUSH_SMALL | SW2 |
| 1 | TLP627 | Housings_DIP:DIP-4_W7.62mm | UA1 |
| 1 | Vin | Connectors_Phoenix:PhoenixContact_MSTBVA-G_02x5.08mm_Vertical | J7 |
| 1 | WeldCurv | Buttons_Switches_THT:SW_PUSH_SMALL | SW3 |
The 72 most common of 78 parts.
Similar boards
- 2 layers68.6 × 73.7 mm
Lm324 soldering station
JanoVel/lm324_soldering_station
The KiCad project of the lm324 soldering station described in this post: http://electronics.vlzqz.com/analog-closed-loop-controlled-soldering-station.html
40 parts4MIT - 2 layers100.1 × 99.9 mm
- 4 layers148.9 × 56 mm
- 2 layers148.5 × 90 mm
ZxRebornClock
popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет
125 partsMIT - 2 layers
Auto spms
Shreyas-k-p/Auto-SMPS
An Arduino-based system that monitors two SMPS units and automatically switches to a backup if the main supply fails.
94 parts1 - 4 layers110 × 80 mm
- 2 layers270 × 153 mm
Questions
How big is the HotAirGun PCB?
It measures 176 × 82.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HotAirGun use?
78 parts, built around the BTA08, LM2575T-5, MAX6675ISA+ and MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HotAirGun KiCad files?
From the raspibo/HotAirGun repository on GitHub, at the commit this page was made from: the board is kicad/HotAirGun.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HotAirGun design in my own project?
Its repository states no licence, so its author keeps all rights: ask raspibo before reusing the design.