Skip to the content
123456

MOC3023M

onsemiExtended

-40℃~+85℃ 1 1.15V 100mA 1A 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS

Part id
onsemi/MOC3023M
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6
In stock
42,800 at JLCPCB (C5240)
Used on
20 open-source boards

Overview

The MOC3023M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 1 1.15V 100mA 1A 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3023M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 42,800 are in stock at JLCPCB (part C5240). 20 open-source boards in 14 repositories on GitHub use it.

Symbol

1246
Relay_SolidState:MOC3023MFrom KiCad's library

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

6
The pins of the MOC3023M
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5NCNot connected
6—Passive

Open-source boards using it

20See all 20
  • 4 layers355 × 160 mmLiBCM, the printed circuit board in 3D

    LiBCM

    doppelhub/Honda_Insight_LiBCM

    Replacement BCM for G1 Honda Insight Lithium Conversion

    717 parts25CC-BY-SA-4.0
  • 2 layers176 × 82.6 mmHotAirGun, the printed circuit board in 3D

    HotAirGun

    raspibo/HotAirGun

    Hot Air Gun File, 3D, Sch, Pcb, C

    78 parts16
  • 2 layers100 × 100 mmReflow, the printed circuit board in 3D

    Reflow

    windsorschmidt/reflow

    Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

    95 parts4MIT
  • 2 layers89.5 × 51.2 mmWMRPControllerBoard, the printed circuit board in 3D

    WMRPControllerBoard

    ekihorf/WRMPController

    Controller for Weller WMRP soldering iron

    41 parts1
  • 2 layers100 × 100 mmEncoder, the printed circuit board in 3D

    Encoder

    dexterlb/led_controller

    A simple device for controlling LEDs

    177 parts
  • 2 layers100 × 100 mmDimmer, the printed circuit board in 3D

    Dimmer

    Embebidos-Fran-Marcos-Nacho/tdse-tf_1-2

    Moya-Cavicchioli

    65 partsMIT
  • 2 layers123.2 × 127 mmProjeto rounded, the printed circuit board in 3D

    Projeto rounded

    Guilherme32/controle-forno-LITel

    Esse repositório guarda o que foi desenvolvido para o controle do forno do Laboratório de Instrumentação e Telemetria da UFJF (LITel)

    57 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MOC3023M?

Yes. The symbol is Relay_SolidState:MOC3023M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3023M?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3023M datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3023M?

JLCPCB lists it as part C5240, with 42,800 in stock; the sellers' links on this page open their listings.

What can replace the MOC3023M?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3053M(UMW) by UMW and the MOC3081M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3023M?

20 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.