

Auto spms
An Arduino-based system that monitors two SMPS units and automatically switches to a backup if the main supply fails. It uses relays, optocouplers, and voltage sensing to ensure uninterrupted power with LED indicators for active source status.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 77
- Pads
- 260
- Tracks, vias
- 681, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jun 2025
- Updated
- 24 Jun 2025
Overview
Auto spms is an open-source printed circuit board by Shreyas-k-p, from the Shreyas-k-p/Auto-SMPS repository on GitHub. It is a 2-layer board with 94 parts on 77 nets, routed with 681 tracks and 0 vias.
It is built around the L7805, VIPER22AS and KBPC3501W-G, with the 1N4148WT and BA159 among its other parts. Its parts include 26 capacitors, 24 resistors, 18 diodes, 7 ICs and 4 transistors.
Main components
5L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsVIPER22AS
SOP-8-40℃~+150℃ 10V~35V 65kHz 800V 90% Non-Isolated Over Voltage Protection、Short Circuit Protection、Soft Start、Over Temperature Protection PWM Modulation SOP-8 AC-DC Controllers and Regulators ROHSMinosAC-DC Controllers And RegulatorsKBPC3501W-G
-Bridge RectifiersComchip1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching DiodesBA159
DO-41-55℃~+125℃ 1 Independent 1.3V@1A 1A 1kV 300ns 5uA DO-41 Fast Recovery / High Efficiency Diodes ROHSluJingFast Recovery / High Efficiency Diodes
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1mF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C2, C3, C5, C6, C15, C16, C17, C18, C19, C20 |
| 4 | 15k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R16, R17, R18, R23 |
| 4 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D13, D14, D17, D18 |
| 3 | 10 ohm | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R8, R11 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R3, R14, R15 |
| 3 | 470mF | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P10.00mm | C11, C12, C26 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal | R20, R22 |
| 2 | 10mF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C22, C23 |
| 2 | 1N5408 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D4, D5 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R6, R12 |
| 2 | 2.2k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R2, R5 |
| 2 | 220 ohm | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal | R19, R21 |
| 2 | 470mF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C14, C25 |
| 2 | Conn_01x03 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | DIPxx-1Axx-11x | Relay_THT:Relay_StandexMeder_DIP_LowProfile | K2, K3 |
| 2 | Filter_EMI_LL | Filter:Filter_FILTERCON_1FPxx | FL1, FL2 |
| 2 | ITR1201SR10AR | OptoDevice:Everlight_ITR1201SR10AR | U6, U7 |
| 2 | KBPC3501W | Diode_THT:Diode_Bridge_GeneSiC_KBPC_W | D1, D3 |
| 2 | LED | LED_THT:LED_D4.0mm | D11, D12 |
| 2 | NPN | Package_TO_SOT_THT:TO-92 | Q4, Q5 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U4 |
| 2 | Thermistor_NTC | Fuse:Fuse_Littelfuse-LVR100 | TH1, TH2 |
| 1 | 01mF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | 100mF | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P10.00mm | C10 |
| 1 | 100mF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C9 |
| 1 | 100mF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C24 |
| 1 | 100mF 400v' | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P10.00mm | C21 |
| 1 | 100mF,400v | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P10.00mm | C7 |
| 1 | 10mF 25v | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C8 |
| 1 | 10ohm | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R13 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D7 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R7 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R10 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R4 |
| 1 | 470mF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C13 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R9 |
| 1 | 5mH | Inductor_SMD:L_Coilcraft_2222SQ-271 | L2 |
| 1 | BA159 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D8 |
| 1 | BC107 | Package_TO_SOT_THT:TO-18-3 | Q1 |
| 1 | BZD27Cxx | Diode_SMD:D_SMF | D9 |
| 1 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J4 |
| 1 | Conn_01x06 | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J5 |
| 1 | D_Schottky | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D10 |
| 1 | D_Zener | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D6 |
| 1 | D_Zener 3.5v | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D15 |
| 1 | D_Zener 3.5v | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D16 |
| 1 | FUSE | Fuse:Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder | F1 |
| 1 | Fuse | Fuse:Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder | F2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | R | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal | R17 |
| 1 | TL431LP | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | VIPer22AS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Wuerth_760871131 | Transformer_THT:Transformer_CHK_UI30-4VA_Flat | TR2 |
| 1 | Wuerth_760871131 | Transformer_THT:Transformer_Triad_VPP16-310 | TR1 |
Similar boards
- 2 layers247.5 × 105 mm

- 2 layers108.3 × 48 mm

220-240AC-5v@2ACONVERTER
abrshzeth/220V-240V-ac-to-5V-2A-dc-power-coversion
this is the circuit which have input of ac input(common outlet from our home) and it will convert it to stable 5V@2A.
27 parts - 4 layers110 × 80 mm

- 2 layers176 × 82.6 mm

- 2 layers270 × 153 mm

- 2 layers146.8 × 64.5 mm

- 2 layers107.3 × 60.3 mm

- 2 layers72.2 × 61.5 mm

2024.03.15 AVR SCORE BOARD RCV v2
jarwyg/WS2811_SCORE_BOARD
W 2017 wraz z znajomym z roku stworzyliśmy tablicę wyników zbudowaną z wykorzystaniem pasków LED WS2811.
46 partsMIT
Questions
What parts does the Auto spms use?
94 parts, built around the L7805, VIPER22AS, KBPC3501W-G and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Auto spms KiCad files?
From the Shreyas-k-p/Auto-SMPS repository on GitHub, at the commit this page was made from: the board is auto smps/auto spms/auto spms.kicad_pcb and its schematic auto smps/auto spms/auto spms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Auto spms design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shreyas-k-p before reusing the design.