
UCB32
Majklzbastlirny/NixieClock
ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)

ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)
Display board is an open-source printed circuit board by Majklzbastlirny, from the Majklzbastlirny/NixieClock repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 185 × 82 mm with 112 parts on 97 nets, routed with 843 tracks and 35 vias.
It is built around the UC3845B, MPSA42 and MPSA92, with the BC547, BC556 and IRF740 among its other parts. Its parts include 47 resistors, 11 capacitors, 7 crystals, 5 switches and 2 diodes. It belongs with the lEDs and displays and home automation and IoT boards and the ESP32 boards of this library.
Výrobní podklady pro univerzální displej s digitrony, obstarávající napájení a buzení.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 22k | MyComponents:R DIN0207 10.16mm | R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R30, R31, R32, R33 +2 |
| 7 | MPSA42 | Package_TO_SOT_THT:TO-92_Wide | VT8, VT9, VT10, VT11, VT12, VT13, VT15 |
| 6 | 330k | MyComponents:R DIN0207 10.16mm | R24, R25, R26, R27, R28, R29 |
| 6 | MPSA92 | Package_TO_SOT_THT:TO-92_Wide | VT2, VT3, VT4, VT5, VT6, VT7 |
| 6 | ZM1080T | MyComponents:nixie_13pin | E1, E2, E3, E4, E5, E6 |
| 5 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C3, C9, C10, C11 |
| 5 | 10k | MyComponents:R DIN0207 10.16mm | R4, R37, R38, R43, R44 |
| 5 | 4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | V3, V4, V5, V6, V7 |
| 5 | 560R | MyComponents:R DIN0207 10.16mm | R39, R40, R41, R42, R46 |
| 5 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | S1, S2, S3, S4, S5 |
| 2 | 100k | MyComponents:R DIN0207 10.16mm | R10, R45 |
| 2 | 2R2 | MyComponents:R DIN0207 10.16mm | R7, R8 |
| 2 | 47R | MyComponents:R DIN0207 10.16mm | R5, R47 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Wide | VT14, VT16 |
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | X6, X7 |
| 2 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | X4, X5 |
| 2 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | X2, X3 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | +5V | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP2 |
| 1 | 100p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C4 |
| 1 | 100uH | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5 |
| 1 | 150k | MyComponents:R DIN0207 10.16mm | R3 |
| 1 | 1k | MyComponents:R DIN0207 10.16mm | R36 |
| 1 | 1n5 | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 2k2 | MyComponents:R DIN0207 10.16mm | R6 |
| 1 | 2n2 | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C7 |
| 1 | 390k | MyComponents:R DIN0207 10.16mm | R9 |
| 1 | 4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | V1 |
| 1 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 47k | MyComponents:R DIN0207 10.16mm | R2 |
| 1 | 4u7 | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C8 |
| 1 | 6k8 | MyComponents:R DIN0207 10.16mm | R11 |
| 1 | 74141 | Package_DIP:DIP-16_W7.62mm | D2 |
| 1 | 7442 | Package_DIP:DIP-16_W7.62mm | D1 |
| 1 | BC556 | Package_TO_SOT_THT:TO-92_Wide | VT17 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | X1 |
| 1 | Fuse | MyComponents:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF76_Horizontal_Open | F1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP3 |
| 1 | IRF740 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | VT1 |
| 1 | LDR | OptoDevice:R_LDR_D6.4mm_P3.4mm_Vertical | R1 |
| 1 | MA7805 | MyComponents:TO-3_78xx | A1 |
| 1 | UC3845 | Package_DIP:DIP-8_W7.62mm | A2 |
| 1 | UF4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | V2 |
| 1 | Ua | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP4 |
| 1 | Vcc | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP1 |

Majklzbastlirny/NixieClock
ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)


profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

ChengminLi/AI-PCB-layout
AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step



nachocarballeda/gclass_amplifier
Diseño de un amplificador clase G para la materia Circuitos Electronicos 2. FIUBA


It measures 185 × 82 mm and has 2 copper layers, 1.6 mm thick.
112 parts, built around the UC3845B, MPSA42, MPSA92 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Majklzbastlirny/NixieClock repository on GitHub, at the commit this page was made from: the board is PCB_Sources/Unidisp-main/display_board.kicad_pcb and its schematic PCB_Sources/Unidisp-main/display_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).