2 layers40 × 16 mm
2 layers70 × 60 mm
Breakout ag1171
ardavast/ajustage- Size
- 70 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 72
- Pads
- 126
- Tracks, vias
- 149, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Sep 2024
- Updated
- 24 Apr 2025
Overview
Breakout ag1171 is an open-source printed circuit board by ardavast, from the ardavast/ajustage repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 60 mm with 28 parts on 72 nets, routed with 149 tracks and 14 vias.
It is built around the AG1171, 1N5819WS and BAS16, with the BZT03C82-TR and MB4S among its other parts. Its parts include 7 diodes, 6 resistors, 5 connectors, 4 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
5AG1171
SIP-14- New Arrivals ROHSSilver TelecomUncategorised
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
BAS16
SOT-231.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V Independent SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
BZT03C82-TR
SOD-571 Independent 1.3W 100Ω 1uA@62V 77V~87V 82V SOD-57 Zener Diodes ROHSVishay IntertechnologyZener Diodes
MB4S
MBS-55℃~+150℃@(Tj) 1.1V@1A 35A 400V 5uA@400V 800mA Single-Phase Rectifier MBS Bridge Rectifiers ROHSYONGYUTAIBridge Rectifiers
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R2, R6 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D4 |
| 1 | 39k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 470u | Capacitor_SMD:CP_Elec_8x10 | C2 |
| 1 | 6P6C | Connector_RJ:RJ25_Wayconn_MJEA-660X1_Horizontal | J4 |
| 1 | Ag1171 | Local:Ag1171 | U1 |
| 1 | BAS16 | Diode_SMD:D_SOD-323 | D3 |
| 1 | BZT03C82 | Diode_THT:D_DO-35_SOD27_P12.70mm_Horizontal | D1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | EXT1 | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J1 |
| 1 | EXT2 | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J2 |
| 1 | F/R | LED_SMD:LED_0805_2012Metric | LED1 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | MB4S | Package_TO_SOT_SMD:TO-269AA | D2 |
| 1 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RING | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP2 |
| 1 | RM | LED_SMD:LED_0805_2012Metric | LED2 |
| 1 | SHK | LED_SMD:LED_0805_2012Metric | LED3 |
| 1 | TIP | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP1 |
| 1 | V_{in} | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP4 |
| 1 | V_{out} | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP3 |
More from ardavast/ajustage
1Similar boards
- 2 layers100 × 100 mm
G2-Control
bernerus/TetrodeBoards
The Tetrode Boards by Ian White, GM3SEK. Redesigned with KiCad.
93 parts - 2 layers44 × 100 mm
- 2 layers100 × 50 mm
Analog Redial v2
sdylewski/Analog-Redial
A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…
77 parts46 - 2 layers78.1 × 50.2 mm
- 2 layers42 × 70 mm
- 2 layers154 × 91 mm
RetroLink
N1UGK/RetroLink_Public
RetroLink connects a standard POTS (Plain Old Telephone Service) analog telephone to the Internet over Wi-Fi, allowing peer-to-peer calling between devices and retro telephony interfacing.
95 parts - 2 layers110.7 × 40.8 mm
- 4 layers94 × 72.4 mm
Questions
How big is the Breakout ag1171 PCB?
It measures 70 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout ag1171 use?
28 parts, built around the AG1171, 1N5819WS, BAS16 and BZT03C82-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout ag1171 KiCad files?
From the ardavast/ajustage repository on GitHub, at the commit this page was made from: the board is hw/breakout_ag1171/breakout_ag1171.kicad_pcb and its schematic hw/breakout_ag1171/breakout_ag1171.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout ag1171 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).