

Ethernet feather
WIP feather with an MIMXRT10xx and Ethernet
- Size
- 23.1 × 71.6 mm
- Copper layers
- 4
- Thickness
- 1.41 mm
- Parts
- 100
- Nets
- 219
- Pads
- 562
- Tracks, vias
- 504, 107
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Oct 2021
- Updated
- 4 Jul 2022
Overview
Ethernet feather is an open-source printed circuit board by artemist, from the artemist/ethernet_feather repository on GitHub. It is a 4-layer board of 23.1 × 71.6 mm with 100 parts on 219 nets, routed with 504 tracks and 107 vias.
It is built around the MIMXRT1051CVJ5B, LAN8742A-CZ and W25Q32JVZPIQ, with the HSP061-4M10 and LP3982IMM-3.3 among its other parts. Its parts include 44 capacitors, 26 resistors, 7 ICs, 7 connectors and 3 crystals. It belongs with the interfaces and adapters and microcontroller boards boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5MIMXRT1051CVJ5B
LFBGA-196-40℃~+105℃ 127 12bit 32 Bit 3V~3.6V 528MHz ARM Cortex-M7 External LFBGA-196 Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)LAN8742A-CZ
QFN-24-EP(4x4)0℃~+70℃ 1.8V~3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver RMII QFN-24-EP(4x4) Ethernet Transceivers ROHSMicrochip TechnologyEthernet TransceiversW25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASHHSP061-4M10
UQFN-10(1x2.5)-40℃~+150℃ 0.3pF 15V 6V 70nA ESD Four channels IEC 61000-4-2 UQFN-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)LP3982IMM-3.3
VSSOP-8-0.65mm-40℃~+85℃@(Ta) 1 120mV@(300mA) 3.3V 300mA 37uVrms 60dB@(1kHz) 6V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive VSSOP-8-0.65mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5, C6, C8, C9, C11, C12, C14, C21, C32, C37, C38, C40, C41 |
| 9 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R6, R10, R11, R12, R22, R24 |
| 8 | 4.7µF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C7, C10, C13, C17, C19, C25 |
| 6 | 220nF | Capacitor_SMD:C_0402_1005Metric | C16, C18, C20, C23, C24, C27 |
| 5 | 33Ω | Resistor_SMD:R_0402_1005Metric | R17, R18, R19, R20, R23 |
| 4 | 2pF | Capacitor_SMD:C_0402_1005Metric | C35, C36, C43, C44 |
| 4 | 49.9Ω | Resistor_SMD:R_0402_1005Metric | R13, R14, R15, R16 |
| 2 | 0.1" | ethernet_feather:MountingHole_2.5mm_Small | H1, H4 |
| 2 | 0.1" | ethernet_feather:MountingHole_2.5mm_Pad_Small | H2, H3 |
| 2 | 1µF | Capacitor_SMD:C_0402_1005Metric | C15, C42 |
| 2 | 2.2µF | Capacitor_SMD:C_0402_1005Metric | C28, C30 |
| 2 | 270Ω | Resistor_SMD:R_0402_1005Metric | R25, R26 |
| 2 | 4pF | Capacitor_SMD:C_0402_1005Metric | C33, C34 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 1 | 1.5kΩ | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10µF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 12.1kΩ 1% | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 120kΩ | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 24MHz 6pF | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 25MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y3 |
| 1 | 2x2 header | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J7 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 33nF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 33µF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 4.7µH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C39 |
| 1 | 470Ω @ 100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | D+2 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | D-2 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D1 |
| 1 | HSP061-4M10 | ethernet_feather:ST_µQFN-10L | U7 |
| 1 | JST PH 2 pin | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | JST SH4 pin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | LAN8742A | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias | U6 |
| 1 | LP3982IMM-3.3 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MIMXRT1051CVJ5B | ethernet_feather:LFBGA-196_12x12mm_Layout14x14_P0.8mm | U1 |
| 1 | Molex 1051620001 | ethernet_feather:microSD_HC_Molex_1051620001 | J3 |
| 1 | Q_PMOS_DGS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RJ45_Abracon_ARJM11D7-114-AB-EW2 | ethernet_feather:RJ45_Abracon_ARJM11D7-114 | J6 |
| 1 | SolderJumper_3_Bridged123 | ethernet_feather:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm | JP1 |
| 1 | TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U4 |
| 1 | WE-TVS-82400102 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
Similar boards
- 2 layers52 × 90 mm

- 4 layers101.6 × 53.3 mm

H730duino
martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board
111 parts47MIT - 4 layers223 × 95 mm

Analog i
deimoscontrols/deimos
Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.
568 parts44 - 4 layers83 × 106 mm

- 4 layers90 × 100 mm

Panel light control
MayaPosch/LEDNip
STM32F427-based developer board with 5 channels for controlling LEDs.
163 parts3BSD-3-Clause - 4 layers90 × 90 mm

- 4 layers96.5 × 116 mm

- 4 layers157.5 × 130 mm

Jv thesis
JhonVelasquez/Embedded_system_Synchronize_Plant
Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).
233 parts2
Questions
How big is the Ethernet feather PCB?
It measures 23.1 × 71.6 mm and has 4 copper layers, 1.41 mm thick.
What parts does the Ethernet feather use?
100 parts, built around the MIMXRT1051CVJ5B, LAN8742A-CZ, W25Q32JVZPIQ and HSP061-4M10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet feather KiCad files?
From the artemist/ethernet_feather repository on GitHub, at the commit this page was made from: the board is ethernet_feather.kicad_pcb and its schematic enet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet feather design in my own project?
Its repository states no licence, so its author keeps all rights: ask artemist before reusing the design.