Skip to the content
12345678

LP3982IMM-3.3

Texas InstrumentsExtended

-40℃~+85℃@(Ta) 1 120mV@(300mA) 3.3V 300mA 37uVrms 60dB@(1kHz) 6V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive VSSOP-8-0.65mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP3982IMM-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
VSSOP-8-0.65mm
Pins
8
In stock
85 at JLCPCB (C2863456)
Used on
1 open-source board

Overview

The LP3982IMM-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a VSSOP-8-0.65mm package with 8 pins. -40℃~+85℃@(Ta) 1 120mV@(300mA) 3.3V 300mA 37uVrms 60dB@(1kHz) 6V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive VSSOP-8-0.65mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP3982IMM-3.3, from KiCad's library) and its footprint (Package_SO:VSSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 85 are in stock at JLCPCB (part C2863456). 1 open-source board in 1 repository on GitHub use it.

Symbol

1OUT2IN3GND6CC7SHDN8FAULT
Regulator_Linear:LP3982IMM-3.3From KiCad's library

Footprint

12345678
Package_SO:VSSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the LP3982IMM-3.3
PinNameType
1OUTPower out
2INPower in
3GNDPower in
4OUTPassive
5NCNot connected
6CCPassive
7SHDNInput
8FAULTOpen collector

Open-source boards using it

1
  • 4 layers23.1 × 71.6 mmEthernet feather, the printed circuit board in 3D

    Ethernet feather

    artemist/ethernet_feather

    WIP feather with an MIMXRT10xx and Ethernet

    100 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP3982IMM-3.3?

Yes. The symbol is Regulator_Linear:LP3982IMM-3.3 and the footprint Package_SO:VSSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP3982IMM-3.3?

VSSOP-8-0.65mm, with 8 pins. Its footprint is drawn on this page.

Where is the LP3982IMM-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP3982IMM-3.3?

JLCPCB lists it as part C2863456, with 85 in stock; the sellers' links on this page open their listings.

What can replace the LP3982IMM-3.3?

Parts like it in the library: the LP3981IMMX-3.3 by Texas Instruments, the REG113EA-3.3/2K5 by Texas Instruments, the LP3981IMM-3.3 by Texas Instruments and the LP2975AIMM-3.3 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP3982IMM-3.3?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.