Skip to the content
2 layers21.5 × 25 mmAnavi rtc-3032, the printed circuit board in 3D

ANAVI RTC 3032: an open source hardware real-time clock module with I2C bus interface built around RV-3032-C7.

Size
21.5 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
8
Pads
31
Tracks, vias
73, 9
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Jun 2026
Updated
26 Oct 2026

Overview

Anavi rtc-3032 is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-rtc-3032 repository on GitHub. It is a 2-layer board of 21.5 × 25 mm with 12 parts on 8 nets, routed with 73 tracks and 9 vias.

Its parts include 3 capacitors, 3 resistors and 1 connector. It belongs with the lEDs and displays and interfaces and adapters boards of this library.

README

README.md

ANAVI RTC 3032

Open source hardware real-time clock module with I2C bus interface built around Micro Crystal RV-3032-C7. The RV-3032-C7 is a surface-mount device (SMD) real-time clock (RTC) module that integrates a CMOS circuit and a quartz crystal (XTAL). It operates under vacuum and is housed in a hermetically sealed ceramic package with a metal lid. It also features a 12-bit temperature sensor with interrupt function.

ANAVI RTC 3032 has been designed with the cross platform and open source electronics design automation suite KiCad.

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

12
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_0603_1608MetricC2, C3
24.7kResistor_SMD:R_0603_1608MetricR2, R3
110kResistor_SMD:R_0603_1608MetricR1
110uFCapacitor_SMD:C_0603_1608MetricC1
1Battery_CellBattery:BatteryHolder_Keystone_3000_1x12mmCR1216/CR1220 Battery
1Conn_01x06_Pinlib:PinHeader_1x06_P2.54mm_Horizontal-modJ1
1LOGOlogo:anavi-logoG***
1RV-3032lib:RV-3032RV-3032-C7

The 10 most common of 12 parts.

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Anavi rtc-3032 PCB?

It measures 21.5 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi rtc-3032 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi rtc-3032 KiCad files?

From the AnaviTechnology/anavi-rtc-3032 repository on GitHub, at the commit this page was made from: the board is anavi-rtc-3032.kicad_pcb and its schematic anavi-rtc-3032.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi rtc-3032 design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.