Skip to the content
2 layers145.4 × 60.3 mmQL PC0084A keyboard adapter, the printed circuit board in 3D

QL PC0084A keyboard adapter

alvaroalea/QL_PC0084A_keyboard_adapter

A Unknow Keyboard Adapter for the Sinclair QL Computer

Size
145.4 × 60.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
101
Pads
234
Tracks, vias
527, 32
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Oct 2024
Updated
9 Oct 2024

Overview

QL PC0084A keyboard adapter is an open-source printed circuit board by alvaroalea, from the alvaroalea/QL_PC0084A_keyboard_adapter repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 145.4 × 60.3 mm with 26 parts on 101 nets, routed with 527 tracks and 32 vias.

It is built around the 74LS14PC and 74LS148P-E. Its parts include 7 resistors, 6 ICs, 5 capacitors, 3 connectors and 2 transistors. It belongs with the keyboards and input and interfaces and adapters boards of this library.

Main components

2

README

README.md

Unknow Keyboard Interface for Sinclair QL

A reverse engineering exercice using a unknow Keyboard adapter for Sinclair QL found on internet.

Licensed under Cern OHL-S - https://ohwr.org/cern_ohl_s_v2.txt

Thanks to XorA for the aditional information.

WARNING: DO NOT USE THIS PROJECT IS NOT TESTED AND MISSING THINGS

This is not a functional item, it's only a exercice of reverse engineering to reinforce my skills in Kicad EDA Software.

This project was done using freely available pictures of the interface found on internet.

Schematic shall be correct, but be aware that this interface was with a DIN-6 conector, and I do not know any type of Keyboard that use this conector, also all wires are in use, so the keyboard is unknow. I suspect of any kind of Serial-Ascii keyboard, but have no information.

Also this project is completely useless without the firmware of the microcontroller an ROM.

Firmware

U2 is a D8749HC microcontroller with a 2Kb of OTP ROM, it shall contains some kind of Keyboard to Ascii interface.

U3 is a 27F64 8Kb EPROM, and contain a lookup table to convert the Ascii ouput of U2 to the Matrix of the QL computer.

Original QL or Hermes chip shall be placed on the U1 Socket.

Comparative

My Components Side My Copper Side Real Top Real Botton

Parts

26
QtyValueFootprintReferences
4100nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1, C3, C4, C5
34K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R5, R6
23K3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R7
2470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
274LS14Package_DIP:DIP-14_W7.62mmU7, U8
2BC184LPackage_TO_SOT_THT:TO-92Q1, Q2
2Turned Pins 1x20Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ1, J2
115pCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2
12764Package_DIP:DIP-28_W15.24mmU3
16 MhzCrystal:Crystal_HC49-U_HorizontalY1
174LS148Package_DIP:DIP-16_W7.62mmU6
1D8749HCPackage_DIP:DIP-40_W15.24mmU2
1Male Horz. 6pinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ3
1SOCKET 40 PINPackage_DIP:DIP-40_W15.24mm_SocketU1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2

Similar boards

  • 2 layers379 × 139.7 mmNova modern, the printed circuit board in 3D

    Nova modern

    ForgottenMachines/Data-General-Nova

    49 parts5
  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    140 parts200
  • 2 layers134.6 × 208.3 mmTs2, the printed circuit board in 3D

    Ts2

    jefftranter/68000

    Code related to the Motorola 68000 microprocessor.

    110 parts133
  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 4 layers214 × 170 mm.C68, the printed circuit board in 3D

    .C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    185 parts51GPL-2.0
  • 2 layers159.5 × 99.8 mmM68kcomp1, the printed circuit board in 3D

    M68kcomp1

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    55 parts32CC-BY-SA-4.0
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers58.4 × 68.4 mmCbm2rrcart, the printed circuit board in 3D

    Cbm2rrcart

    sjgray/CBM-II-Carts

    My CBM-II cartridge designs plus cloned carts

    13 parts6

Questions

How big is the QL PC0084A keyboard adapter PCB?

It measures 145.4 × 60.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the QL PC0084A keyboard adapter use?

26 parts, built around the 74LS14PC and 74LS148P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the QL PC0084A keyboard adapter KiCad files?

From the alvaroalea/QL_PC0084A_keyboard_adapter repository on GitHub, at the commit this page was made from: the board is QL_PC0084A_keyboard_adapter.kicad_pcb and its schematic QL_PC0084A_keyboard_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the QL PC0084A keyboard adapter design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).