Interfaces and adapters

7,328 boards

2 layers30 × 36.8 mm
ZCU104 Breakout
MohnessWaizy/AutonomROS
AutonomROS: Autonomous Car Swarm with Hardware-accelerated ROS Programming
10 parts5
2 layers38.1 × 60.5 mm
TDR splitter
MR-DOS/TDR_splitter
Addon for TDR_avalanche to allow simple TDR cable measurement
23 parts5GPL-3.0
2 layers67 × 104 mm
Breakout board
Mritunjay5511/ESP32-Multi-Motor-Controller-Board-
Custom ESP32-WROOM-32 robotics controller PCB with onboard buck/LDO power regulation, auto-program circuit, and BTS7960/RMCS/relay/servo interfaces. Designed in KiCad.
38 parts5MIT
2 layers50.8 × 25.4 mm
Esp jtag
Muriukidavid/esp-jtag
A JTAG programmer for esp targets based on esp-prog redone in KiCad
72 parts5Apache-2.0
2 layers52.5 × 47.5 mm
AlveoU25 JTAG Adapter
mwrnd/AlveoU25_JTAG_Adapter
Alveo U25 Debug Connector to Xilinx JTAG and UART and I2C Adapter
21 parts5BSD-2-Clause
2 layers57 × 51.6 mm
Ftdi601 breakout
ncicek/FT601-FPGA-interface-board
A breakout board for the USB3.0 interface chip meant for getting lots of data in or out of a FPGA. Designed to mount to a Lattice MachXO3 starter board.
34 parts5
2 layers88 × 40 mm
74HC165-breakout board
neilenns/74HC165-breakout-board
74HC165 breakout board for use with Arduino or similar
34 parts5MIT
2 layers22.9 × 48.3 mm
MDBT42Q breakout
ogatatsu/MDBT42Q-breakout
MDBT42Q breakout board of nrf52832 module
102 parts5
2 layers39 × 39 mm
UP1-GW UART
OpenKNX/OpenKNX-UP1
OpenKNX system UP1
67 parts5
2 layers55.5 × 30 mm
Maxxfan ethernet controller
Pekaway/maxx-rj45-controller
i2c expansion board to control the MaxxFan via rj45 port.
33 parts5
2 layers20.3 × 45.8 mm
Esp32-c3-wroom-02-n4-breakout
phybros/esp32-c3-wroom-02-n4-breakout
Breakout board for the ESP32-C3-WROOM-02(U)-N4 module
3 parts5CC-BY-SA-4.0
4 layers120 × 104 mm
Step400 r1
ponoor/STEP400
4 axis stepper motor driver with Ethernet interface.
245 parts5MIT
2 layers54.6 × 34.9 mm
Doc
potato1992/PCSwitchPi
Control PC power buttons (power/reset/force power down) using a raspberry pi through Web interface
15 parts5Apache-2.0
4 layers87.5 × 91.9 mm
Pc104-adapter
spacelab-ufsc/pc104-adapter
PC-104 Adapter Board
9 parts5
2 layers154.4 × 107.6 mm
SparkFun BlueSMiRF ESP32-PTH panelized
sparkfun/SparkFun_BlueSMiRF-v2
Documentation, firmware, and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless UART pipe and are a great wireless replacement for serial cables.
998 parts5
2 layers12.7 × 22.2 mm
Swd blaster
steieio/swd-blaster
This design adapts the 10 pin 50 mil picth JTAG header pinout used by Arm to the 10 pin 100 mil pitch header pinout used by Altera for their Blasters. It works great with the Tigard board and openFPGALoader.
3 parts5CC0-1.0
2 layers51 × 63.5 mm
Nabu ftdi serial
thorpej/nabu-ftdi-serial
A serial interposer board for NABU PCs with a FTDI USB-serial adapter and hardware flow control
9 parts5BSD-2-Clause
2 layers52.4 × 22.7 mm
GBCart Extender
timville85/GBCart-Extender
Extender and Bridge for Gameboy repros to fit in OEM cartridges
34 parts5GPL-3.0
2 layers145 × 65 mm
Fan test adapter
tjko/fan-test-adapter
Adapter PCB board for easily testing PC (PWM) fans.
75 parts5GPL-3.0
2 layers39.4 × 48.3 mm
Midi uart adapter
tschiemer/midi-uart-adapter
PCB layout for a simple MIDI (In-Through-Out) / UART - Adapter according to MIDI 1.0 Specification
25 parts5MIT
2 layers50.8 × 22.9 mm
FeatherWing 485
W8LID/RS-485-FW
An RS-485 FeatherWing for the Adafruit Feather system.
22 parts5
2 layers24 × 14 mm
Darling
XenGi/darling
FTDI helper for the future. With FT230X, blinky lights and USB-C!
21 parts5MIT
4 layers50 × 40 mm
Cmv2000-sensor
xrpbot/cmv_2000_hardware
Adapter to connect AMS CMV2000 image sensor to FMC
79 parts5
2 layers59.9 × 30 mm
Padauk pgm
89Mods/padauk-pgm
Open-source programmer for PMS150 devices.
32 parts4MIT