2 layers71 × 71 mm
2 layers39 × 39 mm
UP1-GW UART
OpenKNX/OpenKNX-UP15OpenKNX system UP1
- Size
- 39 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 77
- Pads
- 243
- Tracks, vias
- 555, 106
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Feb 2022
- Updated
- 21 Apr 2026
Overview
UP1-GW UART is an open-source printed circuit board by OpenKNX, from the OpenKNX/OpenKNX-UP1 repository on GitHub. It is a 2-layer board of 39 × 39 mm with 67 parts on 77 nets, routed with 555 tracks and 106 vias.
It is built around the RP2040, LTV-217-B-G and TPS7A4901DGN, with the USBLC6-2SC6 and BAS70-05 among its other parts. Its parts include 25 capacitors, 17 resistors, 8 ICs, 6 connectors and 3 diodes. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
LTV-217-B-G
SOP-4-175mil-55℃~+110℃ 1 1.2V 200mW 2us 3.75kV 3us 400mV@8mA,2.4mA 50% 50mA 50mA 600% 6V 70V DC Phototransistor SOP-4-175mil Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
TPS7A4901DGN
TSSOP8+36V, +150mA, Ultralow-Noise, Positive Linear RegulatorTexas InstrumentsUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
BAS70-05
SOT-23-40℃~+125℃ 1 Pair Common Cathode 100mA 100nA@50V 1V@15mA 70V 70mA SOT-23 Schottky Diodes ROHSBORNSchottky Diodes
README
README.mdOpenKNX-UP1
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0402_1005Metric | C61, C63, C64, C65, C66, C67, C103, C105, C110, C111, C112, C113, C114, C115, C131, C132 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R66, R101, R102, R103, R105 |
| 4 | 22 | Resistor_SMD:R_0402_1005Metric | R40, R41, R107, R108 |
| 4 | 470 | Resistor_SMD:R_0402_1005Metric | R63, R64, R65, R67 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C60, C62, C109 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C120, C130 |
| 2 | 33p | Capacitor_SMD:C_0402_1005Metric | C101, C102 |
| 2 | BAS70-05 | Package_TO_SOT_SMD:SOT-23 | D60, D61 |
| 2 | Digital Isolator | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U61, U62 |
| 2 | Wago243-131 | DomsKiCADLib:Wago243-131 | J100a, J100b |
| 1 | 10uF/6.3V | Capacitor_SMD:C_0402_1005Metric | C40 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y100 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R62 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R61 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R106 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R60 |
| 1 | C_Polarized | DomsKiCADLib:CP_Radial_D10.0mm_H20.0mm_P5.00mm_Horizontal | C41 |
| 1 | Conn_01x04 | EasyEDALib:Cixi_Kefa_KF128-2.54-4p | J40 |
| 1 | Conn_01x05 | EasyEDALib:Cixi_Kefa_KF128-2.54-5p | J60 |
| 1 | Conn_01x10 | EasyEDALib:CONN-SMD_8P-P1.25-L4.4-W14.8_reversed | J101 |
| 1 | KNX_Conn | OpenKNX:KNX_Connector | J100 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | LOGO | OpenKNX:CC-BY-NY-SA_12x4 | G*** |
| 1 | LOGO | OpenKNX:OpenKNX_Logo_10x10 | G*** |
| 1 | LTV-217-B-G | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U63 |
| 1 | MAX803R | Package_TO_SOT_SMD:SOT-23 | U102 |
| 1 | OpenKNX NanoBCU | OpenKNX:NanoBCU_PinHeader_SMD_low_profile_bigPads | GN100 |
| 1 | Prog | EasyEDAModLib:C455282_SW-SMD_4P-L4.2-W3.3-P2.15-LS5.1 | SW100 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U100 |
| 1 | TPS7A4901DGN | Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm | U60 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U40 |
| 1 | V_ISO_SEL | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP60 |
| 1 | W25Q | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U101 |
The 65 most common of 67 parts.
More from OpenKNX/OpenKNX-UP1
8- 2 layers39 × 39 mm
- 2 layers48 × 48 mm
- 2 layers39 × 39 mm
- 2 layers39 × 17.6 mm
- 2 layers48 × 48 mm
- 2 layers30 × 30 mm
- 2 layers27.4 × 17.8 mm
Similar boards
- 4 layers80 × 100 mm
Baseboard
NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.
240 parts91 - 2 layers285 × 94.6 mm
- 2 layers46 × 84 mm
- 2 layers97 × 86 mm
STM32 UART board x4
PanPeople/ES100_hacking
Bird Zero Electric Scooter with ES-100 ESC | knowledge repository
132 parts2 - 2 layers80 × 50 mm
- 2 layers100 × 85 mm
- 4 layers150.6 × 89.9 mm
AdvDash 5 inch
ADVecu/ADV.dash
ADV.dash is a dashboard project built with LVGL and ESP32-S3. It is prepared to receive CAN bus data from rusEFI and, in the future, other programmable ECUs.
190 parts - 2 layers281.6 × 255.2 mm
Synthia
Engineering-House/Project-Synthia
The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)
236 parts
Questions
How big is the UP1-GW UART PCB?
It measures 39 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UP1-GW UART use?
67 parts, built around the RP2040, LTV-217-B-G, TPS7A4901DGN and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UP1-GW UART KiCad files?
From the OpenKNX/OpenKNX-UP1 repository on GitHub, at the commit this page was made from: the board is hardware/EDA-Files/UP1-GW-UART/UP1-GW-UART.kicad_pcb and its schematic hardware/EDA-Files/UP1-Controller2040/UP1-Controller2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UP1-GW UART design in my own project?
Its repository states no licence, so its author keeps all rights: ask OpenKNX before reusing the design.