Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers16.9 × 14.4 mmRs485-ch340e, the printed circuit board in 3D

    Rs485-ch340e

    TG9541/rs485-ch340e

    A small CH340E based configurable RS485 or TTL 2/3-wire USB dongle

    17 parts15MIT
  • 2 layers50 × 55 mmQuadRS485pico, the printed circuit board in 3D

    QuadRS485pico

    thomasfla/pico-pio-uart-dma-rs485

    Implementing 4x RS485 using pipico PIO and DMA

    23 parts15BSD-3-Clause
  • 2 layers26 × 13.6 mmCFDC embedded, the printed circuit board in 3D

    CFDC embedded

    ucandevices/CFDC_embedded

    Embedded code and PCB for CAN FD to USB converter

    36 parts15LGPL-3.0
  • 2 layers39 × 39 mmTransmitter, the printed circuit board in 3D

    Transmitter

    will127534/CSI-2-FourLane-HDMI-Extender

    A simple MIPI CSI-2 extender with 4-lane support through HDMI cable

    18 parts15MIT
  • 4 layers40 × 12 mmUsb adapter, the printed circuit board in 3D

    Usb adapter

    zbwu/cyberdog_misc

    Demultiplexing "Download" Type-C port to Console, Recovery USB and Recovery Button

    20 parts15MIT
  • 4 layers32.4 × 48 mmOmegaPoE, the printed circuit board in 3D

    OmegaPoE

    zeroping/OmegaPoE

    A Power-over-Ethernet Dock for the Onion Omega board

    87 parts15
  • 2 layers85 × 56 mmGrasPiB v1, the printed circuit board in 3D

    GrasPiB v1

    an-ven/graspib

    GPIB interface board for Raspberry Pi

    45 parts14
  • 2 layers39.1 × 32 mmMsx mouse adapter, the printed circuit board in 3D

    Msx mouse adapter

    bendecaf/synth-pcbs

    Various PCBs for synths

    13 parts14GPL-3.0
  • 2 layers19.1 × 25.4 mmMD-90SM breakout, the printed circuit board in 3D

    MD-90SM breakout

    db-electronics/MD-90SM-breakout-kicad

    A simple breakout board for the MD-90SM Mini-Din 9 (Sega Genesis 2 A/V) connector

    3 parts14
  • 2 layers25.4 × 31.8 mmThumbstick breakout, the printed circuit board in 3D

    Thumbstick breakout

    dbenoy/thumbstick-breakout

    Thumbstick Breakout Board

    8 parts14
  • 2 layers29.6 × 42.5 mmPogoprogB, the printed circuit board in 3D

    PogoprogB

    electronut/ElectronutLabs-PogoProg

    Pogo Pin Programmer with 2.54 mm pitch - perfect for SWD programming

    3 parts14
  • 2 layers99.1 × 82.4 mmC64ExpansionBreakout, the printed circuit board in 3D

    C64ExpansionBreakout

    hackup/C64ExpansionBreakout

    Breakout Board for the Expansion Port of the C64

    11 parts14
  • 2 layers72 × 90 mmWind breakout, the printed circuit board in 3D

    Wind breakout

    idlehandsdev/wind_breakout

    Breakout board for all Adafruit Feather series boards.

    58 parts14
  • 2 layers101.6 × 54.6 mmPico sst39sf0x0-pcb, the printed circuit board in 3D

    Pico sst39sf0x0-pcb

    ifilot/pico-sst39sf0x0-programmer

    PICO based flasher utility for SST39SF0x0 EEPROM chips

    60 parts14
  • 2 layers29.2 × 20.3 mmHT42B534USB2UART, the printed circuit board in 3D

    HT42B534USB2UART

    jiegec/HT42B534USB2UART

    A simple USB to UART board designed with KiCad.

    15 parts14
  • 4 layers64.5 × 85.1 mmIsolator CAN SMT v2, the printed circuit board in 3D

    Isolator CAN SMT v2

    jsphuebner/bms-hardware

    Hardware design files for Lithium BMS

    68 parts14GPL-3.0
  • 2 layers42.2 × 42.2 mmAS5600 Breakout, the printed circuit board in 3D

    AS5600 Breakout

    kanestoboi/AS5600-Nema-17-Board

    A magnetic contactless encoder board for the NEMA 17 motor

    18 parts14GPL-3.0
  • 2 layers217.2 × 113 mmJunior interface, the printed circuit board in 3D

    Junior interface

    laurent-fr/junior_computer_replica

    A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's

    120 parts14
  • 2 layers100.1 × 49.9 mmRC2014-Ethernet, the printed circuit board in 3D

    RC2014-Ethernet

    Manawyrm/RC2014-Ethernet

    RTL8019 Ethernet card for the RC2014 Z80 computer

    29 parts14
  • 2 layers55.6 × 63.5 mmDMB Wemos D1 Breakout, the printed circuit board in 3D

    DMB Wemos D1 Breakout

    MKme/ESP8266

    ESP8266 projects, firmware, PCB designs, Gerbers & ref docs

    89 parts14
  • 2 layers15.2 × 55.4 mmCANine V1.4, the printed circuit board in 3D

    CANine V1.4

    motionlayer/CANine

    Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter

    33 parts14MIT
  • 2 layers21.9 × 17.1 mmAlimTeleinfoMySensors, the printed circuit board in 3D

    AlimTeleinfoMySensors

    tdouez/TeleinfoMySensors

    Interface Téléinfo pour compteur Linky avec MySensors

    14 parts14