
Thumbstick breakout
Thumbstick Breakout Board
- Size
- 25.4 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 23
- Tracks, vias
- 29, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Sep 2024
- Updated
- 13 Sep 2024
Overview
Thumbstick breakout is an open-source printed circuit board by dbenoy, from the dbenoy/thumbstick-breakout repository on GitHub. It is a 2-layer board of 25.4 × 31.8 mm with 8 parts on 5 nets, routed with 29 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.md"PS5 Hall Effect" Compatible Thumbstick Breakout Board
This breakout board is designed to be a drop-in replacement for the Sparkfun BOB-09110 but using hall effect thumbsticks instead of low quality "PS2 style" sticks.
These thumbstick components are widely available on Ali Express as replacement thumbsticks for game controllers. Unlike a traditional potentiometer based joystick, these sticks only operate with a specific polarity, so ensure you select one meant specifically for the PS5 to match the design of this board.
PCBWay order link:
https://www.pcbway.com/project/shareproject/_PS5_Hall_Effect_Thumbstick_Breakout_Board_abc13f47.html
(10 for $5 at time of writing. I get a small commission.)
![]()
![]()
Datasheet
I couldn't find a datasheet for these stick components, but the datasheet for this alternative stick seemed to have measurement information the exact same footprint, so it was used in the creation of this board.
License
Copyright (c) Daniel Benoy
Distributed under the terms of the Creative Commons ShareAlike 4.0 International license.
THESE FILES ARE PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Screw Hole | thumbstick-breakout:Screw Hole | U$3, U$4, U$5, U$6 |
| 1 | LOGO | LOGO | G*** |
| 1 | ~ | thumbstick-breakout:1x05 | JP1 |
| 1 | ~ | thumbstick-breakout:Joystick | U1 |
The 7 most common of 8 parts.
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Thumbstick breakout PCB?
It measures 25.4 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thumbstick breakout use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thumbstick breakout KiCad files?
From the dbenoy/thumbstick-breakout repository on GitHub, at the commit this page was made from: the board is kicad/thumbstick-breakout.kicad_pcb and its schematic kicad/thumbstick-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thumbstick breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask dbenoy before reusing the design.