2 layers55.9 × 57.2 mm
2 layers39.1 × 32 mm
Msx mouse adapter
bendecaf/synth-pcbs14Various PCBs for synths
- Size
- 39.1 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 30
- Pads
- 75
- Tracks, vias
- 183, 44
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jul 2021
- Updated
- 3 Apr 2024
Overview
Msx mouse adapter is an open-source printed circuit board by bendecaf, from the bendecaf/synth-pcbs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 39.1 × 32 mm with 13 parts on 30 nets, routed with 183 tracks and 44 vias.
It is built around the ATMEGA168PA-AU. Its parts include 5 capacitors, 3 connectors, 2 resistors, 1 IC and 1 diode. It belongs with the retro computing and games and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdsynth-pcbs
This site contains some stuff I have built for some synths/samplers I own.
I tinker with electronics, release stuff when I feel like it and I make it public when it's maybe not perfect. I'm not an electronics expert, so I may not always know what I'm doing. I learn the necessary electronics as I use it. Use at your own risk.
Be smart. Don't just trust the stuff I offer for download here. Take a look at the schematic and the PCB design beforehand.
Feedback is always very welcome 😄 Feel free to ask question in the discussions.
The main content of this site (descriptions, documentations) can be found in the Wiki.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 16.000Mhz | Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | ATmega168PA-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | MSX DSUB9 Female | custom:MSX DSUB9 Female | J1 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | PS/2 USB Connector | Connector_USB:USB_A_Molex_67643_Horizontal | J2 |
| 1 | Power LED (Green) | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
More from bendecaf/synth-pcbs
2- 2 layers28.2 × 45.1 mm
Similar boards
- 2 layers58.4 × 41.7 mm
Stepper board
felixzero/escrocs
Repository for the ESCROCS team for the french robotics cup 2020!
81 parts7GPL-3.0 - 2 layers75 × 40 mm
Remote
bismarx-v1/Sumec-Remote
IR remote for MiniSumo, schematic and partial code was forked from p1rse
47 parts1 - 2 layers100 × 50 mm
Led strip dmx
lrvdijk/ledstrip-dmx-receiver
KiCad Project for a DMX receiver driving a LED strip with 5050 SMD RGB LEDs.
38 parts1 - 2 layers82.6 × 23.5 mm
KiCad1
modular-vertical-farming/module-pcb
The PCB files for the modular vertical farming project
15 parts1MIT - 2 layers76.2 × 77.5 mm
Avr programmer
jdhp-pcb/pcb-atmega-xx8-isp-board
Copyright (c) 2014 Jeremie DECOCK (http://www.jdhp.org)
9 partsMIT - 2 layers57.8 × 31.1 mm
- 2 layers149 × 100 mm
- 2 layers30.5 × 30.5 mm
Lpkf test
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
7 parts16Apache-2.0
Questions
How big is the Msx mouse adapter PCB?
It measures 39.1 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Msx mouse adapter use?
13 parts, built around the ATMEGA168PA-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Msx mouse adapter KiCad files?
From the bendecaf/synth-pcbs repository on GitHub, at the commit this page was made from: the board is roland-sxxx/msx-mouse-adapter/msx-mouse-adapter.kicad_pcb and its schematic roland-sxxx/msx-mouse-adapter-unz-hid-pico/msx-mouse-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Msx mouse adapter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).