Skip to the content
1234567891011121314151617181920212223242526272829303132

ATMEGA168PA-AU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATMEGA168PA-AU
Category
Microcontrollers (MCU, MPU, SOC)
Package
TQFP-32(7x7)
Pins
32
In stock
4,476 at JLCPCB (C8728)
Used on
13 open-source boards

Overview

The ATMEGA168PA-AU is a microcontroller made by Microchip Technology in a TQFP-32(7x7) package with 32 pins. -40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATmega168PA-A, from KiCad's library) and its footprint (Package_QFP:TQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board. 4,476 are in stock at JLCPCB (part C8728). 13 open-source boards in 12 repositories on GitHub use it.

Symbol

1PD32PD43GND4VCC7XTAL1/PB68XTAL2/PB79PD510PD611PD712PB013PB114PB215PB316PB417PB518AVCC19ADC620AREF22ADC723PC024PC125PC226PC327PC428PC529RESET/PC630PD031PD132PD2
MCU_Microchip_ATmega:ATmega168PA-AFrom KiCad's library

Footprint

1234567891011121314151617181920212223242526272829303132
Package_QFP:TQFP-32_7x7mm_P0.8mmFrom KiCad's library

From the datasheet

9
Supply, least
2.7 V · VCC, recommended operating, min · p. 270
Supply, most
5.5 V · VCC, recommended operating, max · p. 270
Supply, absolute maximum
6 V · VCC, absolute maximum · p. 268
Works from
-40 °C · TA, characterized operating ambient, min · p. 270
Works up to
125 °C · TA, characterized operating ambient, max · p. 270
Takes working
8.4 mA · active, 16 MHz, VCC = 5 V, power reduction enabled, typical · p. 270
Takes at most
16 mA · active, 16 MHz, VCC = 5 V, power reduction enabled, max · p. 270
Takes asleep
1.1 µA · power-down, WDT disabled, VCC = 5 V, typical · p. 270
A pin gives at most
40 mA · DC current per I/O pin, absolute maximum · p. 268

Open-source boards using it

13See all 13
  • 2 layers39.1 × 32 mmMsx mouse adapter, the printed circuit board in 3D

    Msx mouse adapter

    bendecaf/synth-pcbs

    Various PCBs for synths

    13 parts14GPL-3.0
  • 2 layers58.4 × 41.7 mmStepper board, the printed circuit board in 3D

    Stepper board

    felixzero/escrocs

    Repository for the ESCROCS team for the french robotics cup 2020!

    81 parts7GPL-3.0
  • 2 layers75 × 40 mmRemote, the printed circuit board in 3D

    Remote

    bismarx-v1/Sumec-Remote

    IR remote for MiniSumo, schematic and partial code was forked from p1rse

    47 parts1
  • 2 layers100 × 50 mmLed strip dmx, the printed circuit board in 3D

    Led strip dmx

    lrvdijk/ledstrip-dmx-receiver

    KiCad Project for a DMX receiver driving a LED strip with 5050 SMD RGB LEDs.

    38 parts1
  • 2 layers82.6 × 23.5 mmKiCad1, the printed circuit board in 3D

    KiCad1

    modular-vertical-farming/module-pcb

    The PCB files for the modular vertical farming project

    15 parts1MIT
  • 2 layers76.2 × 77.5 mmAvr programmer, the printed circuit board in 3D

    Avr programmer

    jdhp-pcb/pcb-atmega-xx8-isp-board

    Copyright (c) 2014 Jeremie DECOCK (http://www.jdhp.org)

    9 partsMIT
  • 2 layers57.8 × 31.1 mmLZRTag, the printed circuit board in 3D

    LZRTag

    lzrtag/LZRTag

    AVR-Based easily modifyable DIY Lasertag!

    30 parts111GPL-3.0
  • 2 layers149 × 100 mmIolite, the printed circuit board in 3D

    Iolite

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    51 parts32CC-BY-SA-4.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATMEGA168PA-AU?

Yes. The symbol is MCU_Microchip_ATmega:ATmega168PA-A and the footprint Package_QFP:TQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATMEGA168PA-AU?

TQFP-32(7x7), with 32 pins. Its footprint is drawn on this page.

Where is the ATMEGA168PA-AU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATMEGA168PA-AU?

JLCPCB lists it as part C8728, with 4,476 in stock; the sellers' links on this page open their listings.

What can replace the ATMEGA168PA-AU?

Parts like it in the library: the ATMEGA328P-AU by Microchip Technology, the ATMEGA48PA-AU by Microchip Technology, the ATMEGA328PB-AU by Microchip Technology and the ATMEGA88PA-AU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATMEGA168PA-AU?

13 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.