Skip to the content
1234567891011121314151617181920212223242526272829303132

ATMEGA48PA-AU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 20MHz 23 256Byte 4KB 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATMEGA48PA-AU
Category
Microcontrollers (MCU, MPU, SOC)
Package
TQFP-32(7x7)
Pins
32
In stock
12,437 at JLCPCB (C9433)
Used on
3 open-source boards

Overview

The ATMEGA48PA-AU is a microcontroller made by Microchip Technology in a TQFP-32(7x7) package with 32 pins. -40℃~+85℃ 1.8V~5.5V 10bit 20MHz 23 256Byte 4KB 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATmega48PA-A, from KiCad's library) and its footprint (Package_QFP:TQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board. 12,437 are in stock at JLCPCB (part C9433). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1PD32PD43GND4VCC7XTAL1/PB68XTAL2/PB79PD510PD611PD712PB013PB114PB215PB316PB417PB518AVCC19ADC620AREF22ADC723PC024PC125PC226PC327PC428PC529RESET/PC630PD031PD132PD2
MCU_Microchip_ATmega:ATmega48PA-AFrom KiCad's library

Footprint

1234567891011121314151617181920212223242526272829303132
Package_QFP:TQFP-32_7x7mm_P0.8mmFrom KiCad's library

Pinout

32
The pins of the ATMEGA48PA-AU
PinNameType
1PD3Input/output
2PD4Input/output
3GNDPower in
4VCCPower in
5GNDPassive
6VCCPassive
7XTAL1/PB6Input/output
8XTAL2/PB7Input/output
9PD5Input/output
10PD6Input/output
11PD7Input/output
12PB0Input/output
13PB1Input/output
14PB2Input/output
15PB3Input/output
16PB4Input/output
17PB5Input/output
18AVCCPower in
19ADC6Input
20AREFPassive
21GNDPassive
22ADC7Input
23PC0Input/output
24PC1Input/output
25PC2Input/output
26PC3Input/output
27PC4Input/output
28PC5Input/output
29RESET/PC6Input/output
30PD0Input/output
31PD1Input/output
32PD2Input/output

Open-source boards using it

3
  • 2 layers22 × 34 mmKey tap88, the printed circuit board in 3D

    Key tap88

    jmA500/Key-Tap

    Key-Tap. Use keyboard hotkeys to configure internal hardware extensions in the Amiga 500.

    13 parts10GPL-2.0
  • 2 layers38 × 36 mmBinaeruhr, the printed circuit board in 3D

    Binaeruhr

    timocramer/binaeruhr

    binary pocket watch

    33 parts4
  • 2 layers22.1 × 22.1 mmDragon AY Plugin, the printed circuit board in 3D

    Dragon AY Plugin

    jimbro1000/Dragon-AY-Plugin

    Plugin Ay audio plugin for Dragon32 rev3 board

    15 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATMEGA48PA-AU?

Yes. The symbol is MCU_Microchip_ATmega:ATmega48PA-A and the footprint Package_QFP:TQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATMEGA48PA-AU?

TQFP-32(7x7), with 32 pins. Its footprint is drawn on this page.

Where is the ATMEGA48PA-AU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATMEGA48PA-AU?

JLCPCB lists it as part C9433, with 12,437 in stock; the sellers' links on this page open their listings.

What can replace the ATMEGA48PA-AU?

Parts like it in the library: the ATMEGA328P-AU by Microchip Technology, the ATMEGA328PB-AU by Microchip Technology, the ATMEGA88PA-AU by Microchip Technology and the ATMEGA168PA-AU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATMEGA48PA-AU?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.