Skip to the content

Interfaces and adapters

7,328 boards
  • 4 layers19.6 × 35 mm0101-SERIAL CP2102N, the printed circuit board in 3D

    0101-SERIAL CP2102N

    TileParts/0101-SERIAL-CP2102N

    基于 CP2102N 的 USB-UART 转接器,并且附带 ESP32 兼容的自动烧录电路

    46 parts
  • 2 layers28 × 28 mmBeeb wifiport, the printed circuit board in 3D

    Beeb wifiport

    timhawes/beeb_wifiport

    Serial interface for connecting a BBC Micro user port to an ESP32-S3.

    18 parts
  • 2 layers62.2 × 22.9 mmRn4020 breakout, the printed circuit board in 3D

    Rn4020 breakout

    timhawes/rn4020_breakout

    Simple breakout board for RN4020

    2 parts
  • 2 layers58 × 52 mmAdapter tt04-cb tt06-db, the printed circuit board in 3D

    Adapter tt04-cb tt06-db

    TinyTapeout/adapter-pcb

    For interfacing between different versions of the carrier board and the demo board

    9 partsApache-2.0
  • 2 layers45 × 52.5 mmBreakout tt02-cob, the printed circuit board in 3D

    Breakout tt02-cob

    TinyTapeout/breakout-tt02-cob

    46 partsApache-2.0
  • 2 layers72.9 × 71.1 mmAMS - CANBus - RGB - Nchannel, the printed circuit board in 3D

    AMS - CANBus - RGB - Nchannel

    TJLTM/Automotive-Monitoring-System-CANBus-Sensor

    What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…

    59 parts
  • 2 layers31.4 × 30 mmSWD UART CTX-10, the printed circuit board in 3D

    SWD UART CTX-10

    TL-Embedded/SWD-UART-CTX-10

    Adaptor board for SWD + UART via TC2050 or EC10

    15 parts
  • 2 layers63 × 23 mmJetson interface board, the printed circuit board in 3D

    Jetson interface board

    tmcit-ararobo-2026a/jetson-interface-board

    Jetsonのヘッダーに取り付けてCANトランシーバーやデバッグ用USBポートを搭載する基板

    38 partsMIT
  • 2 layers45 × 18 mmJtag connect 6, the printed circuit board in 3D

    Jtag connect 6

    tmolteno/swd-connect

    A simple pogo-pin connector and footprint for connecting SWD debugging

    2 partsGPL-3.0
  • 4 layers95 × 95 mmDart6UL Breakout, the printed circuit board in 3D

    Dart6UL Breakout

    tniver1030/Dart6UL_Breakout

    Breakout board for the Variscite Dart6ULL SOM

    154 parts
  • 2 layers72.1 × 36.1 mmBrewnode MCU Adapter, the printed circuit board in 3D

    Brewnode MCU Adapter

    Tobbisch/Brewnode_MCU_Adapter

    PCB Adapter for MCU to Brewnode

    6 partsGPL-3.0
  • 6 layers38.1 × 43.2 mmRP2040-Breakout, the printed circuit board in 3D

    RP2040-Breakout

    Tobi-McKellar/RP2040-Breakout

    A simple RP2040 breakout.

    47 parts
  • 6 layers50 × 20 mmQuick nic, the printed circuit board in 3D

    Quick nic

    tobycm/quick-nic

    usb 3 to ethernet adapter :b

    26 partsMIT
  • 6 layers16 × 59 mmSkibidi ethernet dongle, the printed circuit board in 3D

    Skibidi ethernet dongle

    tobycm/skibidi-ethernet-dongle

    a simple usb 2.0 to 100M ethernet dongle. supports usb c plug and usb a plug

    23 partsMIT
  • 2 layers40 × 40 mmUsb hub tutorial, the printed circuit board in 3D

    Usb hub tutorial

    tobycm/usb-hub-tutorial

    a simple usb hub

    22 partsMIT
  • 2 layers41.5 × 60.5 mmMod sensor agua, the printed circuit board in 3D

    Mod sensor agua

    TomasOsP/water-flow-sensor-module

    4-channel 5V→24V opto-isolated flow-sensor→PLC interface — KiCad hardware (CC BY 4.0)

    30 partsCC-BY-4.0
  • 6 layers160 × 100 mmBuslab, the printed circuit board in 3D

    Buslab

    tombueng/hilprobe

    HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.

    429 parts
  • 2 layers76.2 × 58.4 mmMAX7128 JTAG Tester, the printed circuit board in 3D

    MAX7128 JTAG Tester

    tomcircuit/MAX7000S-CPLD-JTAG-Tester

    EPM7064SLx84 CPLD Tester

    26 parts
  • 2 layers45.8 × 38 mmSPI breakout, the printed circuit board in 3D

    SPI breakout

    tomeetom22/VBUS_Wisblock_Connector

    KiCad project for a WisBlock IO SPI breakout board. The board brings the WisBlock 40-pin IO connector out to:

    13 parts
  • 2 layers37.1 × 18.8 mmBuchla 5xio breakout, the printed circuit board in 3D

    Buchla 5xio breakout

    tommyyork/buchla_5xio_idc_breakout

    KiCad project for a simple Buchla 223e / 200e-style IO port panel with passthrough for the 2x5 IDC 223e cable

    2 parts