2 layers58 × 52 mm
Adapter tt06-cb tt04-db
TinyTapeout/adapter-pcb
For interfacing between different versions of the carrier board and the demo board
6 partsApache-2.0
2 layers58 × 52 mm
Adapter tt04-cb tt06-db
TinyTapeout/adapter-pcbFor interfacing between different versions of the carrier board and the demo board
- Size
- 58 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 64
- Pads
- 181
- Tracks, vias
- 357, 81
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Aug 2024
- Updated
- 14 Aug 2024
Overview
Adapter tt04-cb tt06-db is an open-source printed circuit board by TinyTapeout, from the TinyTapeout/adapter-pcb repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 58 × 52 mm with 9 parts on 64 nets, routed with 357 tracks and 81 vias.
It is built around the 24LC02BT-I/MC, NPTC202KFMS-RC and 95157-440LF. Its parts include 2 resistors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
3
24LC02BT-I/MC
UDFN-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C DFN-8-EP(2x3) EEPROM ROHSMicrochip TechnologyEEPROMNPTC202KFMS-RC
SMD,P=2.54mm-40℃~+125℃ 2 2.54mm 2.54mm 250V 3A 40P 7.6mm Phosphor bronze Square Hole Surface Mount,Vertical Tin SMD,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers95157-440LF
SMD,P=2.54mmUncategorisedAmphenol
README
README.mdTiny Tapeout adapter PCBs
For interfacing between different versions of the carrier board and the demo board
TT04 carrier board to TT06 demo board
TT06 carrier board to TT04 demo board
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | TT_logo | Logos:TT_logo | TTLOGO, TTLOGO |
| 2 | ~ | TinyTapeout:FH-00148_PinSocket_2x20_P2.54mm | TT06_CON1, TT06_CON2 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMD | TT04_CON1, TT04_CON2 |
| 1 | 24LC02 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U1 |
More from TinyTapeout/adapter-pcb
1Similar boards
- 2 layers50 × 52 mm
- 2 layers50 × 52 mm
Breakout tt06-qfn
htfab/breakout-pcb-snapshot
The Tiny Tapeout chips are delivered on a breakout board that allows:
153 partsApache-2.0 - 2 layers50 × 52 mm
- 2 layers104.5 × 81 mm
- 4 layers104.5 × 81 mm
Tinytapeout demo
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
309 parts3.1kGPL-3.0 - 4 layers31.5 × 65 mm
UrchinCam 01
nickraymond/nereus_Pi_shield_ADIN2111
A Raspberry Pi Zero 2W shield built from a copy of the Sofar Bristlemouth mote: ADIN2111 two-port 10BASE-T1L with PoDL, powered from the bus, 5 V for the Pi, a 24 V payload port, and the Sofar mote's power path…
96 parts - 4 layers50 × 50 mm
- 4 layers89 × 61 mm
Questions
How big is the Adapter tt04-cb tt06-db PCB?
It measures 58 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adapter tt04-cb tt06-db use?
9 parts, built around the 24LC02BT-I/MC, NPTC202KFMS-RC and 95157-440LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter tt04-cb tt06-db KiCad files?
From the TinyTapeout/adapter-pcb repository on GitHub, at the commit this page was made from: the board is adapter-tt04-cb-tt06-db/adapter-tt04-cb-tt06-db.kicad_pcb and its schematic adapter-tt04-cb-tt06-db/adapter-tt04-cb-tt06-db.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter tt04-cb tt06-db design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).