2 layers45 × 52.5 mm
Breakout tt04-qfn
htfab/breakout-pcb-snapshot
The Tiny Tapeout chips are delivered on a breakout board that allows:
113 partsApache-2.0
2 layers50 × 52 mm
Breakout tt06-qfn
htfab/breakout-pcb-snapshotThe Tiny Tapeout chips are delivered on a breakout board that allows:
- Size
- 50 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 153
- Nets
- 65
- Pads
- 407
- Tracks, vias
- 789, 145
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Oct 2025
- Updated
- 7 Oct 2025
Overview
Breakout tt06-qfn is an open-source printed circuit board by htfab, from the htfab/breakout-pcb-snapshot repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50 × 52 mm with 153 parts on 65 nets, routed with 789 tracks and 145 vias.
It is built around the 24LC02BT-I/MC, RSP-122811-01 and NPTC202KFMS-RC. Its parts include 19 capacitors, 15 connectors, 6 resistors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
3
24LC02BT-I/MC
UDFN-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C DFN-8-EP(2x3) EEPROM ROHSMicrochip TechnologyEEPROM
RSP-122811-01
--40℃~+90℃ 1 50Ω 60V 6GHz Inner pin Normal Contact - Coaxial Connectors (RF) ROHSSamtecCoaxial Connectors (RF)NPTC202KFMS-RC
SMD,P=2.54mm-40℃~+125℃ 2 2.54mm 2.54mm 250V 3A 40P 7.6mm Phosphor bronze Square Hole Surface Mount,Vertical Tin SMD,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
README
README.mdTiny Tapeout breakout PCBs
The Tiny Tapeout chips are delivered on a breakout board that allows:
-
the demo board to host and interact with the IC and its projects
-
easily moving the ASIC to other more specialized PCBs
The PCBs are keyed such that direction of insertion onto hosts is made clear.
TT03 QFN breakout
The breakout-tt03-qfn directory holds a QFN breakout suitable for TT02 and TT03 chips.
It provides access to the project inputs, outputs, select pins etc, though the naming on the PCB refers to the caravel mprj_io pin numbers.
The pin headers used up to this point have been dual entry (access from both top and bottom).
TT04 QFN breakout
The breakout-tt04-qfn directory holds a QFN breakout suitable for TT04 chips. To date, we've been using it with the TT03p5 trial run (hence the markings), though the pinout remains constant for TT04.
We've now moved to more easily sourced standard 100 mil pin headers, placed on the bottom of the PCB. Markings on top are Tiny Tapeout names of the pins (in0 is input 0, ot5 is output 5, etc).
FPGA ASIC simulation PCBs
Following the same footprints as the breakout boards, the ASIC simulation PCBs are circuits designed to allow for use of demo or custom boards while developing or awaiting the actual chips. A version was already produced for TT03 and a TT04-compatible version, with the extra I/O and dedicated clock/reset pins, is under development.
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 53 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1 +37 |
| 30 | StitchingVia-0.3mm | flyingcarsfootprints:StitchingVia-0.3mm | STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1 +14 |
| 12 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12 |
| 12 | U.FL | psysnapeda:SAMTEC_RSP-122811-01 | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13 |
| 10 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 9 | C_1u_0603_50V | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C14, C15, C16, C17, C18, C19 |
| 5 | TestPoint_Alt | TestPoint:TestPoint_Keystone_5019_Minature | TP1, TP2, TP3, TP4, TP9 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP5, TP6, TP7, TP8 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | ~ | TinyTapeout:FH-00148_PinSocket_2x20_P2.54mm | CON1, CON2 |
| 1 | 24LC02 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LOGO | flyingcarsfootprints:PsychoLogoSmall | G*** |
| 1 | Openframe_QFN_TT06_REV2 | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm | U1 |
| 1 | TT_logo | Logos:TT_logo | TTLOGO |
The 151 most common of 153 parts.
More from htfab/breakout-pcb-snapshot
2- 2 layers45 × 52.5 mm
Caravel breakout qfn
htfab/breakout-pcb-snapshot
The Tiny Tapeout chips are delivered on a breakout board that allows:
101 partsApache-2.0
Similar boards
- 2 layers50 × 52 mm
- 2 layers58 × 52 mm
Adapter tt04-cb tt06-db
TinyTapeout/adapter-pcb
For interfacing between different versions of the carrier board and the demo board
9 partsApache-2.0 - 2 layers50 × 52 mm
- 4 layers39.4 × 39.4 mm
- 4 layers50 × 50 mm
- 4 layers89 × 61 mm
- 2 layers76 × 100 mm
AD3D Cloud Connect Board
Autodrop3d/AD3D-Connect-Board
Universal control board for Autodrop3d printers
23 parts1 - 2 layers45 × 52.5 mm
Breakout tt04-qfn openframe
chipfoundry/breakout-pcb-standalone
The Tiny Tapeout chips are delivered on a breakout board that allows:
106 partsApache-2.0
Questions
How big is the Breakout tt06-qfn PCB?
It measures 50 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout tt06-qfn use?
153 parts, built around the 24LC02BT-I/MC, RSP-122811-01 and NPTC202KFMS-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout tt06-qfn KiCad files?
From the htfab/breakout-pcb-snapshot repository on GitHub, at the commit this page was made from: the board is breakout-tt06-qfn/breakout-tt06-qfn.kicad_pcb and its schematic ASIC-simulator/tt03-fpga-ICE40UP5k/caravel-breakout-fpga-ICE40UP5K-TT3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout tt06-qfn design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).