2 layers63.5 × 99.1 mm
2 layers76 × 100 mm
AD3D Cloud Connect Board
Autodrop3d/AD3D-Connect-Board1Universal control board for Autodrop3d printers
- Size
- 76 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 34
- Pads
- 95
- Tracks, vias
- 156, 45
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2019
- Updated
- 21 Sep 2019
Overview
AD3D Cloud Connect Board is an open-source printed circuit board by Autodrop3d, from the Autodrop3d/AD3D-Connect-Board repository on GitHub. It is a 2-layer board of 76 × 100 mm with 23 parts on 34 nets, routed with 156 tracks and 45 vias.
It is built around the M2.5, 150060RS75000 and 150060VS75000, with the NPTC202KFMS-RC among its other parts. Its parts include 7 connectors, 5 switches, 3 resistors and 3 diodes.
Main components
4M2.5
-0.45mm 2.5mm 2mm 5mm DIN934 Hex M2.5X0.45 Nickel plated Silver white - Hexagonal nutsShuntianHex Nut
150060RS75000
0603-40℃~+85℃ 140° 20mA 250mcd 2V 625nm 630nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)150060VS75000
SMD,1.6x0.8mm-40℃~+85℃ 140° 2.4V 20mA 40mcd 570nm 572nm 72mW Discrete Diode Green SMD,1.6x0.8mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)NPTC202KFMS-RC
SMD,P=2.54mm-40℃~+125℃ 2 2.54mm 2.54mm 250V 3A 40P 7.6mm Phosphor bronze Square Hole Surface Mount,Vertical Tin SMD,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
README
README.mdAD3D-Connect-Board
Revision 1
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M2.5 | MountingHole:MountingHole_2.5mm | MK1, MK2, MK3, MK4 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right | J3, J5, J6 |
| 2 | 150060RS75000 | Diode_SMD:D_0603_1608Metric_Castellated | D1, D3 |
| 2 | 82 OHM 5% | Resistor_SMD:R_0603_1608Metric | R1, R7 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J2, J4 |
| 1 | 150060VS75000 | Diode_SMD:D_0603_1608Metric_Castellated | D2 |
| 1 | 68 OHM 5% | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | Cancel/Offline | AD3D custom footprints:SW_SPST_PTS647 | SW2 |
| 1 | Config | AD3D custom footprints:SW_SPST_PTS647 | SW1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right | J7 |
| 1 | Flmnt 1 | AD3D custom footprints:SW_SPST_PTS647 | SW4 |
| 1 | Flmnt 2 | AD3D custom footprints:SW_SPST_PTS647 | SW5 |
| 1 | LOGO | AD3D custom footprints:AD3Dlogo | G*** |
| 1 | NPTC202KFMS-RC | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | P1 |
| 1 | Next | AD3D custom footprints:SW_SPST_PTS647 | SW3 |
Similar boards
- 4 layers70 × 70 mm
Blue interface board
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
130 parts5 - 4 layers131.3 × 72.4 mm
AGBM-02 AA 1-1
AnasSarkiz/Game-Boy-Enhance
AGBM-02 tscircuit adaptation — routing-disabled placement work in progress
245 parts - 2 layers25.9 × 44.7 mm
CatiPCB
andreesc/BLE-Temp-Sensor
Hardware, Firmware, and Mechanical Design Files for a Temperature Sensor Board featuring the HDC1080 sensor and Bluetooth Low Energy (BLE) connectivity.
36 parts - 4 layers120 × 107 mm
SL23-modem tester
JitterCompany/debug-tools
Collection of useful utility PCBs for development purposes
229 partsMIT - 4 layers72.8 × 75 mm
Rover circuit
Project-Emerge/rover-circuit
The Rover Circuit is a comprehensive controller board designed for robotics applications, specifically targeted at robot rovers.
108 partsMIT - 4 layers254.3 × 169.3 mm
- 2 layers72 × 36 mm
Questions
How big is the AD3D Cloud Connect Board PCB?
It measures 76 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AD3D Cloud Connect Board use?
23 parts, built around the M2.5, 150060RS75000, 150060VS75000 and NPTC202KFMS-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AD3D Cloud Connect Board KiCad files?
From the Autodrop3d/AD3D-Connect-Board repository on GitHub, at the commit this page was made from: the board is AD3D Cloud Connect Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AD3D Cloud Connect Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Autodrop3d before reusing the design.