
Swd connect
tmolteno/swd-connect
A simple pogo-pin connector and footprint for connecting SWD debugging

A simple pogo-pin connector and footprint for connecting SWD debugging
Jtag connect 6 is an open-source printed circuit board by tmolteno, from the tmolteno/swd-connect repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45 × 18 mm with 2 parts on 11 nets, routed with 36 tracks and 11 vias.
It belongs with the interfaces and adapters boards of this library.
A simple pogo-pin connector and footprint for connecting SWD debugging
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J2 |
| 1 | jtag-connect-6 | swd-connect:jtag-connect-6-programmer | J1 |

tmolteno/swd-connect
A simple pogo-pin connector and footprint for connecting SWD debugging

tmolteno/swd-connect
A simple pogo-pin connector and footprint for connecting SWD debugging

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 45 × 18 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tmolteno/swd-connect repository on GitHub, at the commit this page was made from: the board is jtag_connect_6/jtag_connect_6.kicad_pcb and its schematic jtag_connect_6/jtag_connect_6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).