Skip to the content
2 layers28 × 28 mmBeeb wifiport, the printed circuit board in 3D

Serial interface for connecting a BBC Micro user port to an ESP32-S3.

Size
28 × 28 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
62
Pads
190
Tracks, vias
449, 51
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Jul 2024
Updated
29 Jul 2025

Overview

Beeb wifiport is an open-source printed circuit board by timhawes, from the timhawes/beeb_wifiport repository on GitHub. It is a 2-layer board of 28 × 28 mm with 18 parts on 62 nets, routed with 449 tracks and 51 vias.

It is built around the ESP32-S3-MINI-1-N4R2, LDL212PV33R and NXB0104GU12X, with the 746X101103JP and USB4105-GF-A among its other parts. Its parts include 6 capacitors, 3 ICs, 3 connectors, 2 resistors and 2 switches. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

5

Parts

18
QtyValueFootprintReferences
30.1uFCapacitor_SMD:C_0402_1005MetricC3, C5, C6
210uFCapacitor_SMD:C_0603_1608MetricC1, C2
25.1K 1%Resistor_SMD:R_0402_1005MetricR1, R2
2EVQ-P7A01PButton_Switch_SMD:SW_SPST_EVQP7ASW1, SW2
11040310811Connector_Card:microSD_HC_Molex_104031-0811J3
11uFCapacitor_SMD:C_0402_1005MetricC4
1613020243121Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_HorizontalJ1
1746X101103JPtimhawes:CTS_746X101103JPRN1
1ESP32-S3-MINI-1-N4R2RF_Module:ESP32-S2-MINI-1U1
1LDL212PV33Rtimhawes:DFN-6-1EP_2x2mm_P0.5mm_EP1.02x1.6mmU3
1NXB0104GU12timhawes:NXP_XQFN12_SOT1174-1U4
1PMEG2020CPA,115Package_SON:HUSON-3-1EP_2x2mm_P1.3mm_EP1.1x1.6mmD1
1USB4105-GF-AConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ2

Similar boards

  • 10 layers17 × 50 mmSip board, the printed circuit board in 3D

    Sip board

    hprd/z80-fpga-drop-in-replacement

    UT Austin Fall 2025-Spring 2026 Senior Design Project for developing a Zilog Z80 CPU drop-in replacement using an FPGA.

    109 parts1
  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 4 layers115 × 38 mmRB SWITCH, the printed circuit board in 3D

    RB SWITCH

    mrhunsaker/RB_SWITCH

    Accessibility Switch with 3 buttons for previous, select, and next

    33 partsApache-2.0
  • 4 layers70 × 50 mmMotor power poc, the printed circuit board in 3D

    Motor power poc

    Galacs/motor-power-poc

    A POC PCB to test circuit electrical protections and motor control schemes

    165 parts
  • 6 layers40 × 40 mm20x20 fc, the printed circuit board in 3D

    20x20 fc

    lmiez/yecnodF405

    Open source flight controller based on the STM32F405 MCU that runs betaflight.

    120 partsGPL-3.0
  • 4 layers45.5 × 69.8 mmAero, the printed circuit board in 3D

    Aero

    LtBrain/aero

    A control system board/robot for Science Olympiads Robot Tour. It will have 2 brushed motor drivers, at least 2 encoder inputs, and support for ultrasonic and TOF sensors.

    53 partsMIT
  • 4 layers45.5 × 69.7 mmAstrum, the printed circuit board in 3D

    Astrum

    LtBrain/astrum

    A control system board/robot for Science Olympiads Robot Tour. It will have 2 brushed motor drivers, at least 2 encoder inputs, and support for ultrasonic and TOF sensors, all in a compact package.

    77 partsMIT
  • 4 layers62 × 105 mmPT100 Datalogger, the printed circuit board in 3D

    PT100 Datalogger

    rasusmilch/PT100_Mesh_Datalogger

    This application turns an ESP32-S3 N8R2 into a UTC-centric PT100 data logger with FRAM-first buffering, SD-card CSV batching/verification, DS3231 RTC support, mesh streaming, and serial-console calibration.

    139 parts

Questions

How big is the Beeb wifiport PCB?

It measures 28 × 28 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Beeb wifiport use?

18 parts, built around the ESP32-S3-MINI-1-N4R2, LDL212PV33R, NXB0104GU12X and 746X101103JP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Beeb wifiport KiCad files?

From the timhawes/beeb_wifiport repository on GitHub, at the commit this page was made from: the board is beeb_wifiport.kicad_pcb and its schematic beeb_wifiport.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Beeb wifiport design in my own project?

Its repository states no licence, so its author keeps all rights: ask timhawes before reusing the design.