Skip to the content
7

LDL212PV33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 1.2A 18V 250uA 3.3V 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable DFN-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LDL212PV33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-6(2x2)
Pins
7
In stock
436 at JLCPCB (C2969892)
Used on
11 open-source boards

Overview

The LDL212PV33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-6(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 1.2A 18V 250uA 3.3V 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable DFN-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LDL212PV33R, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-6_L2.0-W2.0-P0.50-BL-EP1.45, from EasyEDA), ready for a KiCad board. 436 are in stock at JLCPCB (part C2969892). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1GND2ADJ/sense3VOUT4VIN5NC6EN7EP
EasyEDA_Cloud:LDL212PV33RFrom EasyEDA

Footprint

7
EasyEDA_Cloud:DFN-6_L2.0-W2.0-P0.50-BL-EP1.45From EasyEDA

From the datasheet

12
Supply, least
2.5 V · VIN, recommended operating min · p. 6
Supply, most
18 V · VIN, recommended operating max · p. 6
Supply, absolute maximum
20 V · VIN, absolute max · p. 5
Junction, hottest
125 °C · Operating junction temperature max · p. 5
Takes working
250 µA · VIN quiescent current typical, IOUT = 0 mA to 1.2 A, -40 °C < TJ < 125 °C · p. 6
Takes asleep
300 nA · VIN OFF-mode current typical, VEN = GND, VIN = 18 V · p. 6
Gives
1.2 A · Guaranteed output current · p. 1
Current limit
2 A · Short-circuit current typical, RL = 0 · p. 6
Output
3.3 V · LDL212PV33R fixed output · p. 23
Dropout
350 mV · Dropout typical at IOUT = 1.2 A, VOUT > 3 V · p. 6
Junction to case (DFN6 (2x2))
15 K/W · Thermal resistance junction-to-case · p. 5
Junction to air (DFN6 (2x2))
65 K/W · Thermal resistance junction-to-ambient · p. 5

What it is and has

5
Output current
1.2 A guaranteed · p. 1
Undervoltage lockout
Included · p. 1
Enable function
Included · p. 1
Protection
Internal thermal, current and power limitation · p. 1
PSRR
87 dB @ 120 Hz, 75 dB @ 1 kHz · p. 1

Around it

2
cap 1 μF
between VIN and GND; Input capacitor, electrical-characteristics test conditions. · p. 6
cap 4.7 μF
between VOUT and GND; Output capacitor, electrical-characteristics test conditions. · p. 6

Specifications

30
ParameterConditionsAs printedPage
DC input voltage VINmin -0.3 · max 20 V5
DC output voltage VOUTUpper limit VIN + 0.3 Vmin -0.3 V5
Enable input voltage VENUpper limit VIN + 0.3 Vmin -0.3 V5
Output sense pin voltage VSENSEUpper limit VIN + 0.3 Vmin -0.3 V5
Storage temperature range TSTGmin -55 · max 150 °C5
Operating junction temperature range TOPmin -40 · max 125 °C5
Thermal resistance junction-to-caseDFN6 (2x2)typ 15 °C/W5
Thermal resistance junction-to-ambientDFN6 (2x2)typ 65 °C/W5
Operating input voltage VINmin 2.5 · max 18 V6
Turn-on threshold VUVLOtyp 2.3 · max 2.4 V6
Hysteresis VUVLOtyp 200 mV6
VOUT accuracy VOUTIOUT = 10 mA, TJ = 25 °Cmin -2 · max 2 %6
VOUT accuracy VOUTIOUT = 10 mA, -40 °C < TJ < 125 °Cmin -3 · max 3 %6
Line regulation ΔVOUTVOUT + 1 V ≤ VIN ≤ 18 V, IOUT = 10 mAtyp 0.002 · max 0.01 %/V6
Load regulation ΔVOUTIOUT = 10 mA to 1.2 Atyp 0.0001 · max 0.0005 %/mA6
Dropout voltage (1) VDROPIOUT = 1.2 A VOUT > 3 V; output voltage 100 mV below nominaltyp 350 · max 600 mV6
Output noise voltage eN10 Hz to 100 kHz, IOUT = 100 mAtyp 60 uVRMS/VOUT6
Supply voltage rejection SVRVIN = VOUT(NOM) + 1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 120 Hztyp 87 dB6
Supply voltage rejection SVRVIN = VOUT(NOM) + 1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 1 kHztyp 75 dB6
Supply voltage rejection SVRVIN = VOUT(NOM) + 1 V ± VRIPPLE, VRIPPLE = 0.5 V, f = 100 kHztyp 50 dB6
Quiescent current IQIOUT = 0 mA to 1.2 A, -40 °C < TJ < 125 °Ctyp 250 · max 380 uA6
Quiescent current IQVIN input current in OFF mode, VEN = GND VIN = 18 Vtyp 0.3 · max 1.5 uA6
Short-circuit current ISCRL = 0min 1.5 · typ 2 A6
Enable input logic low VENVIN = 2.5 V to 18 V, -40 °C < TJ < 85 °Cmax 0.4 V6
Enable input logic high VENVIN = 2.5 V to 18 V, -40 °C < TJ < 85 °Cmin 1.2 V6
Enable input current IENtyp 1.5 uA7
Enable input current IENVEN = VIN , VIN = 18 Vtyp 16 · max 20 uA7
Turn-on time (2) TONEnable input exceeding VEN high to output reaching 95% of nominaltyp 120 us7
Thermal shutdown TSHDNtyp 175 °C7
Hysteresis TSHDNtyp 25 °C7

Pins, by the datasheet

7
1 GND
Ground. · p. 3
2 ADJ/sense
VOUT sense on fixed version; must be connected to VOUT for proper operation. · p. 3
3 VOUT
Output voltage. · p. 3
4 VIN
Input voltage. · p. 3
5 NC
Not connected. · p. 3
6 EN
Enable pin; the device is in off-state when pulled low. · p. 3
exposed pad GND
Exposed pad must be connected to GND. · p. 3

Ordering codes, by the datasheet

1
LDL212PV33R
DFN6 (2x2) · 3.3 V fixed output · p. 23

Open-source boards using it

11See all 11
  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 4 layers70 × 50 mmMotor power poc, the printed circuit board in 3D

    Motor power poc

    Galacs/motor-power-poc

    A POC PCB to test circuit electrical protections and motor control schemes

    165 parts
  • 6 layers40 × 40 mm20x20 fc, the printed circuit board in 3D

    20x20 fc

    lmiez/yecnodF405

    Open source flight controller based on the STM32F405 MCU that runs betaflight.

    120 partsGPL-3.0
  • 4 layers45.5 × 69.8 mmAero, the printed circuit board in 3D

    Aero

    LtBrain/aero

    A control system board/robot for Science Olympiads Robot Tour. It will have 2 brushed motor drivers, at least 2 encoder inputs, and support for ultrasonic and TOF sensors.

    53 partsMIT
  • 4 layers45.5 × 69.7 mmAstrum, the printed circuit board in 3D

    Astrum

    LtBrain/astrum

    A control system board/robot for Science Olympiads Robot Tour. It will have 2 brushed motor drivers, at least 2 encoder inputs, and support for ultrasonic and TOF sensors, all in a compact package.

    77 partsMIT
  • 4 layers62 × 105 mmPT100 Datalogger, the printed circuit board in 3D

    PT100 Datalogger

    rasusmilch/PT100_Mesh_Datalogger

    This application turns an ESP32-S3 N8R2 into a UTC-centric PT100 data logger with FRAM-first buffering, SD-card CSV batching/verification, DS3231 RTC support, mesh streaming, and serial-console calibration.

    139 parts
  • 4 layers64 × 40 mmWiringHarness, the printed circuit board in 3D

    WiringHarness

    TadAtThayer/MazeController

    Arduino Shield for ES28 project

    37 parts
  • 2 layers28 × 28 mmBeeb wifiport, the printed circuit board in 3D

    Beeb wifiport

    timhawes/beeb_wifiport

    Serial interface for connecting a BBC Micro user port to an ESP32-S3.

    18 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LDL212PV33R?

Yes. The symbol is EasyEDA_Cloud:LDL212PV33R and the footprint EasyEDA_Cloud:DFN-6_L2.0-W2.0-P0.50-BL-EP1.45, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LDL212PV33R?

DFN-6(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the LDL212PV33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LDL212PV33R?

JLCPCB lists it as part C2969892, with 436 in stock; the sellers' links on this page open their listings.

What can replace the LDL212PV33R?

Parts like it in the library: the LDL112PU33R by STMicroelectronics, the AZ1117CH-3.3TRG1 by Diodes Incorporated, the LDL1117S33R by STMicroelectronics and the AMS1117-3.3V-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LDL212PV33R?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.