Skip to the content
134

LD1085D2T33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(3A) 3.3V 30V 3A 5mA 72dB@(120Hz) Fixed Over Temperature Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1085D2T33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-263-2
Pins
3
In stock
12,467 at JLCPCB (C7913)
Used on
7 open-source boards

Overview

The LD1085D2T33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-263-2 package with 3 pins. -40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(3A) 3.3V 30V 3A 5mA 72dB@(120Hz) Fixed Over Temperature Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AZ1117D-1.5TRE1, from EasyEDA) and its footprint (EasyEDA_Cloud:TO-263-2_L10.0-W9.1-P5.08-LS15.2-TL, from EasyEDA), ready for a KiCad board. 12,467 are in stock at JLCPCB (part C7913). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1ADJ/GND3IN4OUT
EasyEDA_Cloud:AZ1117D-1.5TRE1From EasyEDA

Footprint

134
EasyEDA_Cloud:TO-263-2_L10.0-W9.1-P5.08-LS15.2-TLFrom EasyEDA

From the datasheet

14
Supply, least
4.9 V · VI, recommended operating, min · p. 9
Supply, most
30 V · VI, recommended operating, max · p. 9
Supply, absolute maximum
30 V · VI, absolute maximum · p. 5
Works from
-40 °C · TA, operating ambient, min · p. 9
Works up to
125 °C · TA, operating ambient, max · p. 9
Junction, hottest
125 °C · Operating junction temperature, max · p. 5
Takes working
5 mA · Quiescent current, VI ≤ 30 V, typical · p. 9
Gives
3 A · Guaranteed continuous output current, max · p. 1
Current limit
4.5 A · Short-circuit current, VI - VO = 5 V, typical · p. 9
Current limit
500 mA · Short-circuit current, VI - VO = 25 V, typical · p. 9
Output
3.3 V · Fixed output, IO = 0 mA, TJ = 25°C, typical · p. 9
Dropout
1.3 V · IO = 3 A, typical · p. 9
Junction to case (D²PAK)
3 K/W · Junction-case thermal resistance · p. 5
Junction to air (D²PAK)
62.5 K/W · Junction-ambient thermal resistance · p. 5

Open-source boards using it

7
  • 2 layers95 × 97 mmCar controller, the printed circuit board in 3D

    Car controller

    joseshiru/PyroNode

    open-source ESP32-based control system designed to manage multiple outputs, monitor temperature, and provide robust control over external devices.

    77 parts17
  • 2 layers120 × 80 mmTrackerAVL, the printed circuit board in 3D

    TrackerAVL

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    173 parts7
  • 4 layers106.4 × 95 mmIsavideo, the printed circuit board in 3D

    Isavideo

    ianhan/graphics-gremlin-gizmo

    This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.

    142 parts1
  • 4 layers45.9 × 16.1 mmLoRa, the printed circuit board in 3D

    LoRa

    LorenzoCucchi/ELRS-SX1281

    2.4 GHz LoRa board featuring the SX1281 and the SKY65383-11 frontend

    36 parts1MIT
  • 2 layers100 × 100 mmESPHome AIO, the printed circuit board in 3D

    ESPHome AIO

    Ian-Blockmans/ESPHhome-AIO

    An all in one ESPHome development board

    126 parts
  • 2 layers120 × 75 mmController, the printed circuit board in 3D

    Controller

    treideme/toy-car-repair

    Sources of my sons toy car repair.

    83 partsMIT
  • 4 layers72.9 × 62.2 mmFcu kicad v0.1, the printed circuit board in 3D

    Fcu kicad v0.1

    DavidTheFighter/rocketry

    151 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1085D2T33R?

Yes. The symbol is EasyEDA_Cloud:AZ1117D-1.5TRE1 and the footprint EasyEDA_Cloud:TO-263-2_L10.0-W9.1-P5.08-LS15.2-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1085D2T33R?

TO-263-2, with 3 pins. Its footprint is drawn on this page.

Where is the LD1085D2T33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1085D2T33R?

JLCPCB lists it as part C7913, with 12,467 in stock; the sellers' links on this page open their listings.

What can replace the LD1085D2T33R?

Parts like it in the library: the AP1084K33G by Diodes Incorporated, the LM1084S-3.3/TR by HGSEMI, the UZ1085L-33-TN3-R by UTC and the LD1085D2M33R by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1085D2T33R?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.