Skip to the content
1234

LD1085D2M33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(3A) 3.3V 30V 3A 5mA 72dB@(120Hz) Fixed Positive Short Circuit Protection、Thermal shutdown D2PAK-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1085D2M33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
D2PAK-3
Pins
4
In stock
4,779 at JLCPCB (C157423)
Used on
4 open-source boards

Overview

The LD1085D2M33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a D2PAK-3 package with 4 pins. -40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(3A) 3.3V 30V 3A 5mA 72dB@(120Hz) Fixed Positive Short Circuit Protection、Thermal shutdown D2PAK-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM1084IS-5.0RG, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TO-263-3_TabPin4, from KiCad's library), ready for a KiCad board. 4,779 are in stock at JLCPCB (part C157423). 4 open-source boards in 2 repositories on GitHub use it.

Symbol

OUTPUT4INPUT3OUTPUT2ADJ/GND1
EasyEDA_Cloud:LM1084IS-5.0RGFrom EasyEDA

Footprint

1234
Package_TO_SOT_SMD:TO-263-3_TabPin4From KiCad's library

Pinout

4
The pins of the LD1085D2M33R
PinNameType
1ADJ/GNDUnspecified
2OUTPUTUnspecified
3INPUTUnspecified
4OUTPUTUnspecified

Open-source boards using it

4
  • 2 layers166 × 143 mmCustom Inverter PCB, the printed circuit board in 3D

    Custom Inverter PCB

    MiniNugen/Custom_Inverter_Hardware

    PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries

    82 parts1
  • 4 layers166 × 143 mmCustom Inverter PCB, the printed circuit board in 3D

    Custom Inverter PCB

    MiniNugen/Custom_Inverter_Hardware

    PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries

    108 parts1
  • 4 layers74.5 × 120 mmBase, the printed circuit board in 3D

    Base

    aep/artanis-hw

    86 parts
  • 4 layers74.6 × 120 mmBase, the printed circuit board in 3D

    Base

    aep/artanis-hw

    80 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1085D2M33R?

Yes. The symbol is EasyEDA_Cloud:LM1084IS-5.0RG and the footprint Package_TO_SOT_SMD:TO-263-3_TabPin4, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1085D2M33R?

D2PAK-3, with 4 pins. Its footprint is drawn on this page.

Where is the LD1085D2M33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1085D2M33R?

JLCPCB lists it as part C157423, with 4,779 in stock; the sellers' links on this page open their listings.

What can replace the LD1085D2M33R?

Parts like it in the library: the LM1084S-3.3/TR by HGSEMI, the UZ1085L-33-TQ3-R by UTC, the LM1085S-3.3/TR by HGSEMI and the LM1085R-3.3 by HTC Korea TAEJIN Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1085D2M33R?

4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.