Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers24.9 × 15.2 mmAS5600-breakout stable done, the printed circuit board in 3D

    AS5600-breakout stable done

    tomqdev/tiltr

    Repo for the ROS components of my latest attempt at an autonomous mobile manipulator

    10 parts
  • 2 layers46.7 × 30.9 mmUw rs485 hat V5, the printed circuit board in 3D

    Uw rs485 hat V5

    tomrodinger/Raspberry_Pi_HAT_RS485

    This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4

    54 partsApache-2.0
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    113 partsMIT
  • 2 layers42.9 × 24.6 mmFan breakout, the printed circuit board in 3D

    Fan breakout

    tonarino/fan-breakout-pcb

    A simple PCB that helps us simplify cabling in the production of batch2 of gen3 portals.

    6 parts
  • 2 layers21.6 × 25.4 mmLSF0108-breakout board, the printed circuit board in 3D

    LSF0108-breakout board

    tony-corsten/LSF0108-breakout-board

    A breakout board for the Texas Instruments LSF0108, a very fast, octal auto-bidirectional level translator.

    7 parts
  • 2 layers27.9 × 19.3 mmLightning, the printed circuit board in 3D

    Lightning

    tperale/lightning

    ⚡ AS3935 breakout board

    16 parts
  • 4 layers140 × 80 mm24V High Side Driver, the printed circuit board in 3D

    24V High Side Driver

    tracelabs-pcb/can-do12

    4-Layer IC-Gate-Driver for industrial application - Kicad, TPS274160, CANBUS

    147 parts
  • 6 layers63.7 × 24 mmPocketssd-21, the printed circuit board in 3D

    Pocketssd-21

    tracelabs-pcb/pocketssd-21

    Compact USB 3.2 Gen2 to NVMe M.2 bridge PCB — JMS583, 6-layer

    85 parts
  • 4 layers70 × 45 mmUsb audio interface, the printed circuit board in 3D

    Usb audio interface

    tracelabs-pcb/usb-audio-interface

    USB-C Audio Interface PCB — UAC2, Headset, Mic Preamp — KiCad 4-Layer

    110 parts
  • 2 layers134.7 × 91.9 mmTrailCurrentTorrent, the printed circuit board in 3D

    TrailCurrentTorrent

    trailcurrentoss/TrailCurrentTorrent

    CAN bus controlled power distribution module for vehicle electrical circuits

    68 partsMIT
  • 2 layers24.4 × 21.6 mmEs8156 breakout, the printed circuit board in 3D

    Es8156 breakout

    tresonic/es8156_breakout

    Breakout PCB for the Everest Semiconductor ES8156, a DAC with integrated headphone driver.

    12 parts
  • 2 layers26 × 21 mmBreakout, the printed circuit board in 3D

    Breakout

    Trevrosa/sensiron-breakouts

    10 parts
  • 4 layers62 × 67 mmAdapter, the printed circuit board in 3D

    Adapter

    tridentsx/tmc-gateway

    TinyGo firmware for an RP2350-based USB/PoE-LAN instrument gateway: bridges USBTMC/USB488 and HiSLIP to GPIB

    92 parts
  • 2 layers21 × 49.4 mmTrollfinger breakout, the printed circuit board in 3D

    Trollfinger breakout

    trollectronics/trollfinger-breakout

    Breakout cardedge connector for trollbook expansions

    2 parts
  • 4 layers18.3 × 25.8 mmTad5212-board, the printed circuit board in 3D

    Tad5212-board

    tsar-boomba/tad5212-board

    Breakout board for TI's TAD5212 DAC+amp IC

    22 partsGPL-3.0
  • 2 layers26.1 × 56.7 mmPlaystation adapter, the printed circuit board in 3D

    Playstation adapter

    TT-392/playstation_adapter_pcb

    I only wrote software for the Taiko drum, but in theory, all of the hardware is there to support a lot of different kinds of PlayStation controllers. The firmware can be found here.

    39 parts
  • 2 layers22 × 15 mmSwitch breakout, the printed circuit board in 3D

    Switch breakout

    TU-Darmstadt-APQ/phase-frequency_detector_switch_breakout

    Front switch for the phase-frequency_detector

    2 parts
  • 2 layers39.9 × 3.5 mmAdapter pcb, the printed circuit board in 3D

    Adapter pcb

    tudsat-rocket/frodo_adp_adapterPCB

    13 parts
  • 4 layers70 × 54.5 mmInt debugger, the printed circuit board in 3D

    Int debugger

    TUDSSL/DIPS

    This is the official public repository for DIPS: Debugger for Intermittently-Powered Systems. The repository consists of all components that make DIPS: - Hardware - Debugger Firmware - Emulator Firmware - Emulator Host…

    224 parts
  • 2 layers36 × 84 mmFPC Adapter, the printed circuit board in 3D

    FPC Adapter

    tuwrraphael/pcb

    16 parts