
Urti mainboard
greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument

Adapter pcb is an open-source printed circuit board by tudsat-rocket, from the tudsat-rocket/frodo_adp_adapterPCB repository on GitHub. It is a 2-layer board of 39.9 × 3.5 mm with 13 parts on 7 nets, routed with 35 tracks and 36 vias.
It is built around the 74AHC1G14GV. Its parts include 4 connectors, 2 resistors, 1 capacitor, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal | J2, J4 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H3, H4 |
| 1 | 1N4001 | Diode_SMD:D_SOD-128 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 74AHC1G14 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | Conn_01x04 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_SPST | Button_Switch_SMD:430133050816 | SW1 |
| 1 | Screw_Terminal_01x02 | Connector_Amphenol:FLTS22WR00 | J3 |

greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument

hnz1102/sdcdmux-emmc
SD CARD and eMMC Device Multiplexer with Infrared Remote Controller



sayanee/belle
:bell: door bell that will buzz on press and send a mobile notification with IFTTT

condevtion/i2c-pps-hw
Schematics for Programmable DC-DC Power Supply with I2C Interface

hnz1102/shared-usb-memory
USB Memory with One-touch Switching Between Two Device Connections

It measures 39.9 × 3.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the 74AHC1G14GV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tudsat-rocket/frodo_adp_adapterPCB repository on GitHub, at the commit this page was made from: the board is adapter_pcb_v2/adapter_pcb.kicad_pcb and its schematic adapter_pcb_v2/adapter_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tudsat-rocket before reusing the design.