2 layers100 × 100 mm
Computers and single-board computers
1,525 boards- 4 layers50 × 50 mm
Chua x7r
heurstc/Chua-memcapacitor
5D chaos monitor: XIAO RP2350 + ADS1262 streaming Chua attractor data at 12kHz/ch over USB CDC to Linux
17 parts - 4 layers52.5 × 8.5 mm
SensWear V1R1-MainBoard
HeyPCB/senswear-kicad
Sens Wear's SensWear smart ring hardware, converted from their Altium design to KiCad 10. Design by Sens Wear (github.com/Sens-Wear/hardware), MIT.
77 partsMIT - 2 layers53.4 × 32 mm
- 2 layers214 × 45 mm
- 4 layers78 × 48 mm
Motherboard rev 3
hpvdt/falcon_motherboard
Firmware and hardware designs for the Falcon motherboard
69 parts - 2 layers81.8 × 54.8 mm
- 4 layers166.1 × 125.6 mm
LattePanda Mu carrier board
hugoNN1001/LattePanda-Mu-Custom-Carrier-Board
Personal project, work in progress - Learning digital high-speed PCB design by designing a custom carrier board for the LattePanda Mu - based on the reference design: https://github.com/LattePandaTeam/LattePanda-Mu
240 parts - 2 layers62.5 × 106.5 mm
Pn5180 carrier
hyiger/pn5180_carrier
PN5180 8-bay NFC reader carrier board for a filament spool rack (KiCad 10, XIAO ESP32C6)
44 parts - 2 layers93.5 × 80.5 mm
- 6 layers91.4 × 121.9 mm
Theboard.v3.7
ianisms/ai-orchestrator
Fully local voice assistant: custom Pi CM5 smart speaker, gRPC orchestrator, MCP tool plane with authorization boundaries, NVIDIA Parakeet and NeMo speech stack. Source available for review.
60 parts - 4 layers98.2 × 111.5 mm
USB PCIE Board
IbrahimOladepo/USB_PCIE_Board
A PCI Express x1 to USB 3.0 expansion card, designed in KiCad. Plugs into a PCIe x1 slot and breaks it out to four USB 3.0 Type-A ports.
175 partsGPL-2.0 - 2 layers91.9 × 91.9 mm
Rpi cm4-base carrier rocket
IdoAzulai/Rocket-Boards-Uni-Project
University Rocketry club - PCB designs of the flight computer
29 parts - 2 layers80 × 60 mm
Brick Laptop Charger
IEEE-UCR/Yellow-Brick-Laptop-Charger
A laptop charger that runs off of a 12S LiPo (or rather two 6S lipos)
56 partsMIT - 2 layers172.1 × 108 mm
Mb88-testboard
ifilot/morseboard-8088
Single board computer designed around the 8088 processor
81 parts - 2 layers124.5 × 124.5 mm
- 2 layers
- 2 layers50 × 50 mm
Rc helicopter mainboard
ikajdan/rc-helicopter-mainboard
RC helicopter mainboard based on an STM32 MCU
54 partsCERN-OHL-P-2.0 - 4 layers
- 4 layers100 × 100 mm
Tankervision pdb
ikeefe12/tankervision-pdb
Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.
452 parts - 4 layers140 × 97 mm
MainBoard
Immortals-Robotics/MainBoard
Immortals main electronics for the Robocup Soccer Small-Size League
137 parts - 2 layers
- 2 layers111.8 × 119 mm
MainBoard1 (1)
IsaiahKwpz/Kelpie_Mainboard_2023-2024
This is the Mainboard I designed for the kelpie robotics 2023-2024 season. It contains many sensors required to complete various tasks at the competition.
32 parts - 32 layers120 × 45 mm
Main 27M2
isarmg/pcie-switch-2
KiCad PCIe switch PCB design drafts: E1.S and M.2 boards, footprints, models and generation scripts.
730 parts