
ESP32 Project
SFMonsun/Bussysteme-und-Sensorik-ESP32-Projekt
This will be the new repository for a University related Project using a custom ESP32 PCB.

Weather station project
Motherboard is an open-source printed circuit board by hpvdt, from the hpvdt/weather_station repository on GitHub. It is a 2-layer board of 81.8 × 54.8 mm with 55 parts on 67 nets, routed with 454 tracks and 84 vias.
It is built around the ESP32-WROOM-32, BMP390 and SHTC3, with the TPS62177DQC among its other parts. Its parts include 13 resistors, 10 capacitors, 8 ICs, 4 diodes and 3 connectors. It belongs with the computers and single-board computers boards and the ESP32 boards of this library.
Weather station project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C7, C9, C10 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R8, R13, R14 |
| 4 | 130R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | ~ | pressureSensorFootprintLibrary:HV120SM02C | U5, U6, U7 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 10u | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | BMP390 | BMP390-footprints:LGA10_BMP390_BOS | U3 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U8 |
| 1 | SHTC3 | Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm | U2 |
| 1 | TPS62177DQC | Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias | U4 |

SFMonsun/Bussysteme-und-Sensorik-ESP32-Projekt
This will be the new repository for a University related Project using a custom ESP32 PCB.


linlun/HW-ESP8266_Roomba
Kicad schematics of a generic ESP8266 board with interfaces for OLED-display, rotary encoder, Roomba and DC/DC





It measures 81.8 × 54.8 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the ESP32-WROOM-32, BMP390, SHTC3 and TPS62177DQC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hpvdt/weather_station repository on GitHub, at the commit this page was made from: the board is hardware/motherboard/motherboard.kicad_pcb and its schematic hardware/motherboard/motherboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hpvdt before reusing the design.