

IoT devices
- Size
- 48.3 × 31.6 mm
- Copper layers
- 2
- Thickness
- 1.59 mm
- Parts
- 56
- Nets
- 54
- Pads
- 210
- Tracks, vias
- 504, 40
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Dec 2023
- Updated
- 2 Jan 2024
Overview
IoT is an open-source printed circuit board by Michal-Md, from the Michal-Md/PUEiE repository on GitHub. It is a 2-layer board of 48.3 × 31.6 mm with 56 parts on 54 nets, routed with 504 tracks and 40 vias.
It is built around the BMP280, TPS62177DQC and BAT54S. Its parts include 28 capacitors, 9 resistors, 8 inductors, 5 ICs and 3 connectors. It belongs with the home automation and IoT boards and the STM32 boards of this library.
Main components
3BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsTPS62177DQC
UncategorisedTexas InstrumentsBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16, C18, C20, C22, C23, C24 |
| 3 | 0 Ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R8, R9 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 3 | 33pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C15 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C17, C19 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 2.2pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10 |
| 2 | 33pF 0 Ohm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C28 |
| 2 | 6.8pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 0.7pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 10uH 124mOhm | Inductor_SMD:L_TDK_SLF6025 | L7 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L6 |
| 1 | 2.2uF 9mOhm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 22uF 1mOhm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 3.3nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L8 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 4.3pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 470nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 47nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 1 | 4pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 600R@100MHz | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5 |
| 1 | 68pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 7.5pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 8.2nH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3 |
| 1 | 9nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | BAT | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J1 |
| 1 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | STM32WLE5C8Ux | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TPS62177DQC | Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias | U6 |
Similar boards
- 4 layers100 × 48 mm

- 2 layers100 × 94 mm

ESP8266 Roomba panel x 3
linlun/HW-ESP8266_Roomba
Kicad schematics of a generic ESP8266 board with interfaces for OLED-display, rotary encoder, Roomba and DC/DC
204 parts2 - 4 layers76 × 51.5 mm

- 2 layers43.2 × 30.1 mm

- 2 layers21 × 37.3 mm

- 2 layers81.8 × 54.8 mm

- 4 layers60 × 60 mm

- 4 layers130 × 100 mm

Questions
How big is the IoT PCB?
It measures 48.3 × 31.6 mm and has 2 copper layers, 1.59 mm thick.
What parts does the IoT use?
56 parts, built around the BMP280, TPS62177DQC and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IoT KiCad files?
From the Michal-Md/PUEiE repository on GitHub, at the commit this page was made from: the board is IoT.kicad_pcb and its schematic IoT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IoT design in my own project?
Its repository states no licence, so its author keeps all rights: ask Michal-Md before reusing the design.