Skip to the content
12345

SHTC3

Sensirion

Digital I²C temperature / humidity sensor. Input voltage: 1.62 - 3.6 V Typical accuracy: ±2 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/shtc3/

Part id
sensirion/SHTC3
Category
Uncategorised
Pins
10
Used on
73 open-source boards

Overview

The SHTC3 is an uncategorised made by Sensirion with 5 pins. Digital I²C temperature / humidity sensor. Input voltage: 1.62 - 3.6 V Typical accuracy: ±2 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/shtc3/.

PCBKit's library has its KiCad symbol (Sensor_Humidity:SHTC3, from KiCad's library) and its footprint (Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm, from KiCad's library), ready for a KiCad board. 73 open-source boards in 65 repositories on GitHub use it.

Symbol

1VDD2SCL3SDA4VSS
Sensor_Humidity:SHTC3From KiCad's library

Footprint

12345
Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mmFrom KiCad's library

Pinout

5
The pins of the SHTC3
PinNameType
1VDDPower in
2SCLInput
3SDAInput/output
4VSSPower in
5NCNot connected

Open-source boards using it

73See all 73
  • 6 layers54.6 × 57.1 mmCM5 MINIMA 2, the printed circuit board in 3D

    CM5 MINIMA 2

    piecol/CM5_MINIMA_REV2

    Compact, feature-filled CM5 carrier board

    102 parts170CERN-OHL-S-2.0
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 2 layers93.9 × 83.8 mmBackplane, the printed circuit board in 3D

    Backplane

    dbrgn/ic880a-backplane

    Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes, a temperature / humidity sensor, a step-down voltage regulator, an ADC to…

    72 parts15
  • 2 layers22.9 × 63.5 mmEsp rust board, the printed circuit board in 3D

    Esp rust board

    swayerloren/KICAD_ENGINE

    AI-assisted KiCad PCB design workflow for schematics, PCB layouts, DRC, BOM/CPL, and fabrication outputs using Codex or Claude.

    96 parts10MIT
  • 2 layers190 × 75 mmAVT2022 Badge Final, the printed circuit board in 3D

    AVT2022 Badge Final

    epremeaux/AVTokyo_2022_Badge

    AVTokyo 2022 event badge PCB, firmware and server code.

    72 parts9
  • 4 layers71.8 × 66 mmMinimal carrier board for CM4 rev E, the printed circuit board in 3D

    Minimal carrier board for CM4 rev E

    RobertLukan/rpi-cm4-custom-board

    Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…

    45 parts8
  • 4 layers59.6 × 48.3 mmPlant1337, the printed circuit board in 3D

    Plant1337

    chl33/Plant133

    Firmware, circuit design, and 3D-printable components for an automated plant-watering system.

    61 parts6MIT

Questions

Is there a KiCad symbol and footprint for the SHTC3?

Yes. The symbol is Sensor_Humidity:SHTC3 and the footprint Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

Which open-source boards use the SHTC3?

73 boards in 65 repositories on GitHub; the most starred are listed on this page, with their KiCad files.