Skip to the content

Boards using the SHTC3

73 boards

Boards in 65 GitHub repositories, designed in KiCad, that use the SHTC3 by Sensirion (Digital I²C temperature / humidity sensor. Input voltage: 1.62 - 3.6 V Typical accuracy: ±2 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/shtc3/). See how each wires it, with its parts, size, README and files; the SHTC3’s symbol, footprint and pinout are on its own page.

  • 6 layers54.6 × 57.1 mmCM5 MINIMA 2, the printed circuit board in 3D

    CM5 MINIMA 2

    piecol/CM5_MINIMA_REV2

    Compact, feature-filled CM5 carrier board

    102 parts170CERN-OHL-S-2.0
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 2 layers93.9 × 83.8 mmBackplane, the printed circuit board in 3D

    Backplane

    dbrgn/ic880a-backplane

    Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes, a temperature / humidity sensor, a step-down voltage regulator, an ADC to…

    72 parts15
  • 2 layers22.9 × 63.5 mmEsp rust board, the printed circuit board in 3D

    Esp rust board

    swayerloren/KICAD_ENGINE

    AI-assisted KiCad PCB design workflow for schematics, PCB layouts, DRC, BOM/CPL, and fabrication outputs using Codex or Claude.

    96 parts10MIT
  • 2 layers190 × 75 mmAVT2022 Badge Final, the printed circuit board in 3D

    AVT2022 Badge Final

    epremeaux/AVTokyo_2022_Badge

    AVTokyo 2022 event badge PCB, firmware and server code.

    72 parts9
  • 4 layers71.8 × 66 mmMinimal carrier board for CM4 rev E, the printed circuit board in 3D

    Minimal carrier board for CM4 rev E

    RobertLukan/rpi-cm4-custom-board

    Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…

    45 parts8
  • 4 layers59.6 × 48.3 mmPlant1337, the printed circuit board in 3D

    Plant1337

    chl33/Plant133

    Firmware, circuit design, and 3D-printable components for an automated plant-watering system.

    61 parts6MIT
  • 2 layers22.4 × 34.8 mmNrf52 shtc3 board, the printed circuit board in 3D

    Nrf52 shtc3 board

    Sensirion/shtc3_ble_beacon

    Small CR2032 battery driven BLE beacon with Sensirion's humidity and temperature sensor

    22 parts6BSD-3-Clause
  • 2 layers40 × 65 mmMatrix clock, the printed circuit board in 3D

    Matrix clock

    TDA-2030/ledmatrix-clock

    A led-matrix clock for home

    53 parts5Apache-2.0
  • 4 layers69.9 × 44.5 mmDoughLee2, the printed circuit board in 3D

    DoughLee2

    chl33/Dough133

    A temperature-controlled container for proofing and fermenting soughdough

    62 parts3MIT
  • 2 layers40 × 75 mmTWC, the printed circuit board in 3D

    TWC

    jnicolson/TWCController

    Wireless Controller for a Gen 2 Tesla Wall Charger (hardware and software)

    45 parts3GPL-3.0
  • 2 layers142.7 × 194.5 mmSparkFun STC31 panelized, the printed circuit board in 3D

    SparkFun STC31 panelized

    sparkfun/SparkFun_CO2_Sensor-STC31

    A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.

    2,002 parts3
  • 2 layers68.8 × 68.1 mmSmartSensor, the printed circuit board in 3D

    SmartSensor

    AvansETI/SmartSensor

    SmartSensor: a sensor to be used as sensor and actuator within existing buildings.

    68 parts2GPL-3.0
  • 2 layersBLE node, the printed circuit board in 3D

    BLE node

    ldab/BLE-node-u-blox

    u-blox NINA-B3 BLE node, based on nRF52840 and SHTC3

    19 parts2MIT
  • 2 layers51.7 × 80.7 mmESPHome MultiPresence, the printed circuit board in 3D

    ESPHome MultiPresence

    PennyLekas/ESPHome_MultiPresence

    A ESPHome presence sensor with mmWave radar, PIR motion, light, temperature, humidity, and pressure

    48 parts2GPL-3.0
  • 4 layers70 × 35 mmMIRA, the printed circuit board in 3D

    MIRA

    piecol/MIRA

    172 parts2CERN-OHL-S-2.0
  • 4 layers93.3 × 40.7 mmGarage133, the printed circuit board in 3D

    Garage133

    chl33/Garage133

    A DIY device for garage door automation

    60 parts1MIT
  • 4 layers49.5 × 39.4 mmLoRa133, the printed circuit board in 3D

    LoRa133

    chl33/LoRa133

    A base station for LoRa-based satellite sensor devices.

    22 parts1MIT
  • 4 layers62.9 × 42.5 mmPCB Design PFE, the printed circuit board in 3D

    PCB Design PFE

    khawlahhouki/fatigue-detection-edge-ai

    Real-time physical fatigue detection using Edge AI on STM32H7 with FreeRTOS, biosignal acquisition (PPG, EMG, IMU) and TFLite INT8 inference

    64 parts1
  • 2 layers83.1 × 83 mmLumi tubule board, the printed circuit board in 3D

    Lumi tubule board

    NemoAndrea/lumi-tubule

    Decorative desk lamp in the shape of microtubule protein filament.

    76 parts1
  • 2 layers55.9 × 22.9 mmRiotee SensorShield, the printed circuit board in 3D

    Riotee SensorShield

    NessieCircuits/Riotee_SensorShield

    The Riotee Sensor Shield adds a microphone, an accelerometer and a temperature and humidty sensor to the Riotee Board.

    24 parts1CERN-OHL-W-2.0
  • 4 layers50 × 50 mmSTM32-DevBoard, the printed circuit board in 3D

    STM32-DevBoard

    s-grundner/STM32-DevBoard

    STM32 Breakout Board with various Sensors

    106 parts1