
ESP32 DEV MultiPresence breakout
PennyLekas/ESPHome_MultiPresence
A ESPHome presence sensor with mmWave radar, PIR motion, light, temperature, humidity, and pressure

A ESPHome presence sensor with mmWave radar, PIR motion, light, temperature, humidity, and pressure
ESPHome MultiPresence is an open-source printed circuit board by PennyLekas, from the PennyLekas/ESPHome_MultiPresence repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.7 × 80.7 mm with 48 parts on 58 nets, routed with 63 tracks and 0 vias.
It is built around the ESP32-WROOM-32, EKMC1603113 and SHTC3, with the TSL25911FN and TLV75533PDBV among its other parts. Its parts include 10 resistors, 8 capacitors, 7 ICs, 4 connectors and 3 diodes. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 6 | 1u | Resistor_SMD:R_0603_1608Metric | C3, C4, C5, C6, C7, C8 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 3 | LED | Diode_SMD:D_0603_1608Metric | D1, D2, D3 |
| 3 | OpenJumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 2 | SEN0395 | My Footprints:SEN0395 | U3, U5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP2 | SW1, SW2 |
| 1 | 0u1 | Resistor_SMD:R_0603_1608Metric | C2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10u | Resistor_SMD:R_0603_1608Metric | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | EKMC1603113 | My Footprints:EKMxxxxxxxxx | U7 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | SHTC3 | Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm | U4 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TSL2591 | My Footprints:ODFN-6 | U6 |
| 1 | USB_C_Receptacle_Power | My Footprints:USB_C_Power | J3 |

PennyLekas/ESPHome_MultiPresence
A ESPHome presence sensor with mmWave radar, PIR motion, light, temperature, humidity, and pressure

Automato-ag/Brain-Board
Firmware and documentation for the Automato Brain Board V2.0, an ESP32-C6 based agricultural IoT node with onboard temperature, humidity, and light sensing, ESP-NOW mesh networking, relay control, and a self-hosted web…

chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough

jnicolson/TWCController
Wireless Controller for a Gen 2 Tesla Wall Charger (hardware and software)




rawrrudy/kibo
Say hi to Kibo! Kibo is a desktop companion robot that recognizes human emotions and responds through movement, sounds and visual feedback!

ChrisMeletis/satelight_pcb
A repository containing all the printed circuit boards for the SateLight project.
It measures 51.7 × 80.7 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the ESP32-WROOM-32, EKMC1603113, SHTC3 and TSL25911FN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PennyLekas/ESPHome_MultiPresence repository on GitHub, at the commit this page was made from: the board is PCB/ESPHome MultiPresence.kicad_pcb and its schematic DEV breakout/ESP32_DEV_MultiPresence_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).