2 layers114 × 102 mm
Rpi cm4-switch board
sequoia-hope/rpi-cm4-switch-board
A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch
94 parts45
2 layers91.9 × 91.9 mm
Rpi cm4-base carrier rocket
IdoAzulai/Rocket-Boards-Uni-ProjectUniversity Rocketry club - PCB designs of the flight computer
- Size
- 91.9 × 91.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 163
- Pads
- 316
- Tracks, vias
- 447, 94
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Jan 2024
- Updated
- 17 Jan 2024
Overview
Rpi cm4-base carrier rocket is an open-source printed circuit board by IdoAzulai, from the IdoAzulai/Rocket-Boards-Uni-Project repository on GitHub. It is a 2-layer board of 91.9 × 91.9 mm with 29 parts on 163 nets, routed with 447 tracks and 94 vias.
It is built around the 74LVC1G07SE-7-MS, RC0603FR-071KL and LTST-S270KGKT, with the LTST-S270KRKT among its other parts. Its parts include 18 connectors, 2 resistors, 2 diodes and 1 IC. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
Main components
4
74LVC1G07SE-7-MS
SC-70-5SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHSMSKSEMIBuffers, Drivers, Receivers, Transceivers
RC0603FR-071KL
UncategorisedUnknown maker
LTST-S270KGKT
SMD,1.6x1.2mm-30℃~+85℃ 130° 20mA 2V 571nm 574nm 71mcd 75mW Discrete Diode Side View Mount Water Clear Yellow Green SMD,1.6x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-S270KRKT
SMD,1.6x1.2mm-30℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Side View Mount Water Clear SMD,1.6x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric | C_puff1, C_puff2 |
| 1 | +3.3V_spares | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | +5V_spares | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | 74LVC1G07SE-7 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | Baro low | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | Baro main | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Baro mid | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | ComputeModule4-CM4 | CM4IO:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | Detonator 1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Detonator 2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Detonator 3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | Detonator second stage | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
| 1 | GND_spares | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J15 |
| 1 | GPS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | Hall effect low | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | Hall effect mid | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Hall effect up | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | IMU | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Tamir Radio | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Tamir XBee | Xbee:xbee_tht | A1 |
| 1 | spare GPIO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
The 27 most common of 29 parts.
Similar boards
- 2 layers81.8 × 55.4 mm
Cm4-digipi carrier
hemna/cm4-digipi-carrier
Raspberry Pi CM4 Carrier board for Ham radio PTT Control
52 parts3 - 2 layers96 × 90 mm
- 2 layers60 × 55 mm
- 2 layers96 × 90 mm
- 4 layers52.3 × 84.3 mm
- 4 layers90 × 90 mm
- 12 layers232 × 250 mm
KlusterLab r2.0
PCB-Arts/fast-open-switch-hardware
KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.
1,169 parts15
Questions
How big is the Rpi cm4-base carrier rocket PCB?
It measures 91.9 × 91.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi cm4-base carrier rocket use?
29 parts, built around the 74LVC1G07SE-7-MS, RC0603FR-071KL, LTST-S270KGKT and LTST-S270KRKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi cm4-base carrier rocket KiCad files?
From the IdoAzulai/Rocket-Boards-Uni-Project repository on GitHub, at the commit this page was made from: the board is hardware/rpi-cm4-base-carrier-rocket/rpi-cm4-base-carrier-rocket.kicad_pcb and its schematic hardware/rpi-cm4-base-carrier-rocket/cm4-gpio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi cm4-base carrier rocket design in my own project?
Its repository states no licence, so its author keeps all rights: ask IdoAzulai before reusing the design.