

Rotour carrier board v1
- Size
- 93.5 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 67
- Pads
- 169
- Tracks, vias
- 330, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2025
- Updated
- 5 Jan 2026
Overview
Rotour carrier board v1 is an open-source printed circuit board by I-dont-knoww, from the I-dont-knoww/RobotTourV1 repository on GitHub. It is a 2-layer board of 93.5 × 80.5 mm with 49 parts on 67 nets, routed with 330 tracks and 18 vias.
Its parts include 18 resistors, 3 capacitors, 3 diodes, 1 IC and 1 switch. It belongs with the computers and single-board computers boards of this library.
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2K2 | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | 3K3 | Resistor_SMD:R_0603_1608Metric | R2, R4, R6, R8, R10, R12, R14, R16 |
| 4 | Conn_01x04_Pin | Connector_Wire:SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm | DIST1, DIST2, DIST3, DIST4 |
| 2 | Conn_01x02_Pin | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | BTN_CONN1, BTN_PCB1 |
| 2 | Conn_01x06_Pin | Connector_Wire:SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm | MOTOR1, MOTOR2 |
| 2 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | GYRO_LEFT1, GYRO_RIGHT1 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | DRIVER_LEFT1, DRIVER_RIGHT1 |
| 2 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | PICO_LEFT1, PICO_RIGHT1 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 0.33uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uf | Capacitor_SMD:CP_Elec_5x5.4 | C2 |
| 1 | 270R | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 340mV | Diode_SMD:D_SOD-123F | D1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | BATTERY1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot |
The 43 most common of 49 parts.
Similar boards
- 2 layers173 × 122.5 mm

- 2 layers85.1 × 49.8 mm

- 2 layers50 × 90 mm

- 2 layers126.4 × 15.2 mm

- 2 layers43 × 92.3 mm

DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm

- 2 layers61 × 42.5 mm

- 2 layers31 × 38 mm

Questions
How big is the Rotour carrier board v1 PCB?
It measures 93.5 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rotour carrier board v1 use?
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rotour carrier board v1 KiCad files?
From the I-dont-knoww/RobotTourV1 repository on GitHub, at the commit this page was made from: the board is electronics/rotour_carrier_board_v1.kicad_pcb and its schematic electronics/rotour_carrier_board_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rotour carrier board v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask I-dont-knoww before reusing the design.