
DSKY segment
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
DSKY driver is an open-source printed circuit board by benkrasnow, from the benkrasnow/DSKY_EL_replica repository on GitHub, published under the MIT licence. It is a 2-layer board of 43 × 92.3 mm with 49 parts on 261 nets, routed with 892 tracks and 264 vias.
It is built around the CD40109BE, B0540W and MMBD5004S. Its parts include 17 capacitors, 9 ICs, 4 resistors, 4 diodes and 4 connectors. It belongs with the SAM D and SAM boards of this library.
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
https://www.youtube.com/watch?v=Z2o_Sp2-aBo
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uF | DSKY_driver:0603-NO | C2, C3, C11, C12, C13, C14 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | GND, LE, MOSI, SCK |
| 3 | .22u | Capacitor_SMD:C_1210_3225Metric | C15, C16, C17 |
| 3 | 10uF | DSKY_driver:0805-NO | C1, C7, C8 |
| 3 | Conn_15X4 | DSKY_driver:FX6-60S | J1, J2, J4 |
| 3 | HV507 | DSKY_driver:QFP-96_14x20_Pitch0.8mm | U1, U5, U7 |
| 2 | 6.3uF | DSKY_driver:0603-NO | C5, C9 |
| 2 | ATB3225 | DSKY_driver:ATB3225 | TR1, TR2 |
| 2 | B0540W | DSKY_driver:D_SOD-123 | D1, D2 |
| 2 | LT3468 | Package_TO_SOT_SMD:SOT-23-5 | U2, U6 |
| 2 | MMBD5004S | Package_TO_SOT_SMD:SOT-23 | D3, D4 |
| 1 | 1.5K | DSKY_driver:0603-NO | R1 |
| 1 | 100K | DSKY_driver:0603-NO | R3 |
| 1 | 100pF | DSKY_driver:0603-NO | C6 |
| 1 | 10K | DSKY_driver:0603-NO | R4 |
| 1 | 10M | DSKY_driver:0603-NO | R2 |
| 1 | 10n | DSKY_driver:0603-NO | C10 |
| 1 | 2.2uF | Capacitor_SMD:C_2220_5650Metric | C4 |
| 1 | AP2204K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AP2204K-5.0 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ATSAMD21E | DSKY_driver:QFN32_5MM | IC3 |
| 1 | CD40109B | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U8 |
| 1 | CUI_power_jack | DSKY_driver:CUI_PJ-006B-SMT_power_jack | J3 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1 |
| 1 | USB_micro | DSKY_driver:molex_105133_vertical_USB | X1 |
| 1 | green | DSKY_driver:CHIPLED_0603_NOOUTLINE | PWR1 |
| 1 | red | DSKY_driver:CHIPLED_0603_NOOUTLINE | L1 |
| 1 | reset | DSKY_driver:BTN_KMR2_4.6X2.8 | Q2 |

benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display


FeatureNAB/air-sensor
Smart Air Quality Sensor built using ESP32, SEN66 and ESPHome

chimmmmy/echain
software to control a smart keychain with an e ink display, powered by seed studio nrf52840

0sirys/SmartInsole_PF_PCB
Proyecto final, plantilla para medicion de presion plantar


ANSHUMANDOCX/ESP32-Weather-Dashboard
ESP32 weather dashboard using a 3.7 inch eink display

Jakub-Wysocki/message-board-hardware
Design of PCB board used my engineering thesis project "Door message board for displaying information defined by the remote user"

Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
It measures 43 × 92.3 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the CD40109BE, B0540W and MMBD5004S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the benkrasnow/DSKY_EL_replica repository on GitHub, at the commit this page was made from: the board is PCB - KiCad/DSKY_driver/DSKY_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).