
DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

High Voltage Power Supply Unit for EL Displays
EL PSU is an open-source printed circuit board by jduanen, from the jduanen/EL_PSU repository on GitHub, published under the MIT licence. It is a 2-layer board of 66.5 × 32.5 mm with 37 parts on 123 nets, routed with 736 tracks and 34 vias.
It is built around the B0540W and MMBD5004S. Its parts include 9 capacitors, 7 ICs, 4 resistors, 4 diodes and 4 connectors. It belongs with the power boards and the SAM D and SAM boards of this library.
High Voltage Power Supply Unit for EL Displays
This is a modification of the most excellent work of Ben Krasnow at https://github.com/benkrasnow/EL_driver_multi
The primary motivation for these changes are to better support the needs of the EL displays found in https://github.com/jduanen/alienFontDisplay and https://github.com/jduanen/elClock. In particular, to extend the life of these displays, I want to create a triangle (as opposed to, step) waveform so that the dv/dt of the signal exciting the display segments remains (close to) constant.
WIP
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 10uF | Trinket M0 rev D:0805-NO | C1, C7, C8 |
| 2 | 1uF | Trinket M0 rev D:0603-NO | C2, C3 |
| 2 | 6.3uF | Trinket M0 rev D:0603-NO | C5, C9 |
| 2 | ATB3225 | EL_driver:ATB3225 | TR1, TR2 |
| 2 | B0540W | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | Conn_01x20_Female | Connector_PinHeader_1.27mm:PinHeader_1x20_P1.27mm_Vertical | J1, J2 |
| 2 | LT3468 | Package_TO_SOT_SMD:SOT-23-5 | U2, U6 |
| 2 | MMBD5004S | Package_TO_SOT_SMD:SOT-23 | D3, D4 |
| 1 | 1.5K | Trinket M0 rev D:0603-NO | R1 |
| 1 | 100K | Trinket M0 rev D:0603-NO | R3 |
| 1 | 100pF | Trinket M0 rev D:0603-NO | C6 |
| 1 | 10K | Trinket M0 rev D:0603-NO | R4 |
| 1 | 10M | Trinket M0 rev D:0603-NO | R2 |
| 1 | 2.2uF | Capacitor_SMD:C_2220_5650Metric | C4 |
| 1 | 4U#20329 | Trinket M0 rev D:4UCONN_20329_V2 | CN1 |
| 1 | AP2204K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AP2204K-5.0 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ATSAMD21E | Trinket M0 rev D:QFN32_5MM | IC3 |
| 1 | Conn_01x24_Female | Connector_PinHeader_1.27mm:PinHeader_1x24_P1.27mm_Vertical | J3 |
| 1 | HV507 | EL_driver:QFP-96_14x20_Pitch0.8mm | U5 |
| 1 | HV513 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1 |
| 1 | green | Trinket M0 rev D:CHIPLED_0603_NOOUTLINE | PWR1 |
| 1 | red | Trinket M0 rev D:CHIPLED_0603_NOOUTLINE | L1 |
| 1 | reset | Trinket M0 rev D:BTN_KMR2_4.6X2.8 | Q2 |

benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

FeatureNAB/air-sensor
Smart Air Quality Sensor built using ESP32, SEN66 and ESPHome

chimmmmy/echain
software to control a smart keychain with an e ink display, powered by seed studio nrf52840

0sirys/SmartInsole_PF_PCB
Proyecto final, plantilla para medicion de presion plantar


ANSHUMANDOCX/ESP32-Weather-Dashboard
ESP32 weather dashboard using a 3.7 inch eink display

Jakub-Wysocki/message-board-hardware
Design of PCB board used my engineering thesis project "Door message board for displaying information defined by the remote user"

Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
It measures 66.5 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the B0540W and MMBD5004S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jduanen/EL_PSU repository on GitHub, at the commit this page was made from: the board is board/EL_PSU.kicad_pcb and its schematic board/EL_PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).