4 layers50 × 50 mm
4 layers50 × 50 mm
Proyecto final, plantilla para medicion de presion plantar
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 77
- Pads
- 266
- Tracks, vias
- 522, 123
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Jun 2026
- Updated
- 30 Aug 2026
Overview
Zicote is an open-source printed circuit board by 0sirys, from the 0sirys/SmartInsole_PF_PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 50 mm with 62 parts on 77 nets, routed with 522 tracks and 123 vias.
It is built around the ESP32-S3-WROOM-1-N8, TLV9001IDBVR-MS and CAT16-222J4LF, with the MAX40200AUK+T, TP4056-42-ESOP8 and TPS63031DSK among its other parts. Its parts include 19 resistors, 13 capacitors, 8 ICs, 8 diodes and 2 switches. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TLV9001IDBVR-MS
SOT-23-5-40℃~+85℃ -900mV~2.75V、900mV~2.75V 1 1.8V~5.5V 1.8uV/℃ 1MHz 1V/us 1mV 1pA 28uA 45mA 5pA 65nV/√Hz@1kHz 80dB Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMSKSEMIOperational Amplifier
CAT16-222J4LF
0603x42.2kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSBournsResistor Networks & ArraysMAX40200AUK+T
SOT-23-5-40℃~+125℃ 1 1.5V~5.5V 1A Active High Ideal Diode SOT-23-5 ORing Controllers ROHSMaxim Integrated (Analog Devices)Power Distribution Switches
TP4056-42-ESOP8
ESOP-8-40℃~+85℃ 1 1A 2uA 4.2V 4V~8V Charging IC Lithium Battery Support ESOP-8 Battery Management ROHSTOPPOWERBattery Management
TPS63031DSK
UncategorisedTexas Instruments
YC164-FR-0710KL
0603x410kΩ 4 62.5mW 8 ±1% ±200ppm/℃ 0603x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
ESD5B5.0S
SOD-523-55℃~+150℃@(Tj) 1uA 32pF 5.8V 50W 5V Bidirectional IEC 61000-4-2 TVS SOD-523 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)ESD5Z3.3T
SOD-523-55℃~+125℃ 1 10V 10nA 12.5pF 3.3V 3.8V 80W@8/20us 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSApplied PowerESD Protection Devices
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
B0540W
SOD-123-55℃~+125℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHShongjiachengSchottky Diodes
B2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdbaropodometria_PF
Proyecto final, plantilla para medicion de presion plantar
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10uF 10V | PCM_Capacitor_SMD_AKL:C_0603_1608Metric | C1, C2, C3, C5, C6, C8, C11 |
| 6 | 10k | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R11, R27, R28, R29, R30, R31 |
| 4 | 1k | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R3, R4, R9, R10 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 100nF 10V | PCM_Capacitor_SMD_AKL:C_0603_1608Metric | C4, C7, C9 |
| 2 | 100R | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R1, R21 |
| 2 | 10K | EasyEDA:RES-ARRAY-SMD_0603-8P-L3.2-W1.6-BL | RN1, RN2 |
| 2 | 33R | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R25, R26 |
| 2 | 47nF | PCM_Capacitor_SMD_AKL:C_0603_1608Metric | C10, C13 |
| 2 | 5.1K | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R23, R24 |
| 2 | CAT16-222J4LF | EasyEDA:RES-ARRAY-SMD_0603-8P-L3.2-W1.6-BL | U8, U9 |
| 2 | ESD5B5.0S | PCM_Diode_SMD_AKL:D_SOD-523 | D2, D3 |
| 2 | ESD5Z3.3T | PCM_Diode_SMD_AKL:D_SOD-523 | D4, D5 |
| 2 | LED_0603_Green | PCM_LED_SMD_AKL:LED_0603_1608Metric | LED2, LED3 |
| 2 | TS-1088-AR02016 | EasyEDA:SW-SMD_L3.9-W3.0-P4.45 | SW2, SW3 |
| 1 | 1.6k | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R5 |
| 1 | 100k | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R6 |
| 1 | 10uF 10V | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C12 |
| 1 | 2N7002 | PCM_Package_TO_SOT_SMD_AKL:SOT-23 | Q1 |
| 1 | B0540W | EasyEDA:SOD-123_L2.7-W1.6-LS3.7-FD | D1 |
| 1 | B2B-XH-A | EasyEDA:CONN-TH_B2B-XH-A-LF-SN | CN1 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | HC-FPC-1.0-16P-CSH25 | EasyEDA:CONN-SMD_HC-FPC-1.0-16P-CSH25 | FPC1 |
| 1 | LED_0603_Red | PCM_LED_SMD_AKL:LED_0603_1608Metric | LED1 |
| 1 | MAX40200AUK+T | EasyEDA:TSOT-23-5_L2.9-W1.6-P0.95-LS2.8-BL | U5 |
| 1 | MLP2012H2R2MT0S1 | EasyEDA:L0805 | L2 |
| 1 | R25 | PCM_Resistor_SMD_AKL:R_1206_3216Metric | R2 |
| 1 | SolderJumper_2_Open | PCM_SparkFun-Jumper:Jumper_2_NO | JP1 |
| 1 | TLV9001IDBVR | EasyEDA:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U7 |
| 1 | TMUX1208PWR | EasyEDA:TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U6 |
| 1 | TP4056 | EasyEDA:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U4 |
| 1 | TPS63031DSK | Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U3 |
| 1 | TYPE-C 16PIN 2MD | EasyEDA:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
Similar boards
- 4 layers102.4 × 83.1 mm
- 2 layers102.1 × 82.7 mm
PLC Electiva
JosueHerrera05/Josue_Herrera_Electiva_2026_C2
Repositorio Electíva Diseño Mecatrónico 2026-C2
198 partsMIT - 2 layers37 × 45 mm
- 4 layers90 × 10.5 mm
- 4 layers65 × 30 mm
- 4 layers191.2 × 190.9 mm
Neptune
Board-Folk/Neptune
Recreation of the cancelled Sega console that combines Mega Drive/Genesis with 32X.
379 parts180 - 4 layers32 × 57.3 mm
Questions
How big is the Zicote PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Zicote use?
62 parts, built around the ESP32-S3-WROOM-1-N8, TLV9001IDBVR-MS, CAT16-222J4LF and MAX40200AUK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zicote KiCad files?
From the 0sirys/SmartInsole_PF_PCB repository on GitHub, at the commit this page was made from: the board is Zicote.kicad_pcb and its schematic ADC_MUX_IN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zicote design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).