
Control card
johonkanen/agilex3_control_card
FPGA control card (Altera Agilex 3 A3CZ065, B18A) in KiCad 10: schematic, 6-layer board, generator scripts

FleaFPGA Ohm Replica is an open-source printed circuit board by rcardenes, from the rcardenes/FleaFPGA_Replica repository on GitHub. It is a 4-layer board of 65 × 30 mm with 113 parts on 264 nets, routed with 1,456 tracks and 158 vias.
It is built around the LFE5U-25F-6BG256C, TLV62569DRL and FT230XQ-R, with the MX25L1606EM1I-12G, W958D8NBYA5I and 1040310811 among its other parts. Its parts include 52 capacitors, 34 resistors, 9 ICs, 5 connectors and 4 diodes. It belongs with the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100nF | Capacitor_SMD:C_0201_0603Metric | C204, C205, C206, C210, C211, C214, C216, C218, C222, C224, C226, C227, C301, C302, C303, C304 +10 |
| 15 | 10k | Resistor_SMD:R_0402_1005Metric | R301, R302, R412, R413, R414, R415, R416, R417, R418, R419, R420, R426, R427, R428, R429 |
| 9 | 10uF | Capacitor_SMD:C_0402_1005Metric | C201, C202, C203, C212, C213, C217, C219, C223, C504 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R402, R405, R408, R410 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C404, C501, C502, C503 |
| 4 | 180 | Resistor_SMD:R_0402_1005Metric | R411, R423, R424, R430 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C401, C406, C408, C410 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H101, H102, H103, H104 |
| 3 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L401, L402, L403 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C407, C409, C412 |
| 3 | TLV62569DRL | Package_TO_SOT_SMD:SOT-563 | U402, U404, U405 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R205, R206 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C411, C414 |
| 2 | 15k | Resistor_SMD:R_0402_1005Metric | R421, R422 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D301, D401 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C418, C419 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R404, R406 |
| 2 | Amph 10118193-0001LF | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J402, J405 |
| 2 | LED_Small | LED_SMD:LED_0603_1608Metric | D402, D403 |
| 1 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB201 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C403 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C417 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R401 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R425 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R409 |
| 1 | 450k | Resistor_SMD:R_0402_1005Metric | R407 |
| 1 | 82.5k | Resistor_SMD:R_0402_1005Metric | R403 |
| 1 | Conn_02x20 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J403 |
| 1 | FT230XQ | Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U401 |
| 1 | GT-HD005A-CGNG0 | Connector_HDMI_Extra:GT-HD005A | J301 |
| 1 | LFE5U-25F-6BGA256C | Package_BGA_Extra:Lattice_caBGA-256_14.0x14.0mm_Layout16x16_P0.8mm | U201 |
| 1 | MX25L1606 | Package_SO_Extra:SOP-8-1EP_3.9x4.9mm_P1.27m_EP4.1x3.5mm | U403 |
| 1 | Molex 1040310811 | Connector_Card:microSD_HC_Molex_104031-0811 | J404 |
| 1 | TLV75801PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U406 |
| 1 | TPD2EUSB30 | Package_TO_SOT_SMD:Texas_DRT-3 | U1 |
| 1 | W958D8NBYA5I | Package_BGA_Extra:FBGA-25_8x6mm_Layout5x6_P1mm | U2 |
| 1 | XO32 | Oscillator_Extra:Oscillator_SMD_XO32-4Pin_3.2x2.5mm | X401 |

johonkanen/agilex3_control_card
FPGA control card (Altera Agilex 3 A3CZ065, B18A) in KiCad 10: schematic, 6-layer board, generator scripts



RobertGawron/GammaSpectrometer
Device for quantitative analyze energy spectra of gamma-ray sources. Allows to study what radioactive isotopes in what quantities are present in measured sample.


ZhongWwwHhh/Esp32_High_Quality_Recorder_PCB
PCB design for Esp32_High_Quality_Recorder


It measures 65 × 30 mm and has 4 copper layers, 1.61 mm thick.
113 parts, built around the LFE5U-25F-6BG256C, TLV62569DRL, FT230XQ-R and MX25L1606EM1I-12G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rcardenes/FleaFPGA_Replica repository on GitHub, at the commit this page was made from: the board is FleaFPGA_Ohm_Replica.kicad_pcb and its schematic FleaFPGA_Ohm_Replica.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rcardenes before reusing the design.