Skip to the content
1234567

TLV75801PDRV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 31uA 500mA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV75801PDRV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6-EP(2x2)
Pins
6
In stock
3,085 at JLCPCB (C2876308)
Used on
39 open-source boards

Overview

The TLV75801PDRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 31uA 500mA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV75801PDRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 3,085 are in stock at JLCPCB (part C2876308). 39 open-source boards in 37 repositories on GitHub use it.

Symbol

1OUT2FB3GND4EN6IN
Regulator_Linear:TLV75801PDRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

From the datasheet

22
Supply, least
1.5 V · VIN, recommended operating min · p. 5
Supply, most
6 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · absolute maximum junction temperature · p. 4
Takes working
25 µA · typical ground current, IOUT = 0 mA, TJ = 25°C · p. 6
Takes asleep
100 nA · typical shutdown current, VEN ≤ 0.3 V · p. 6
Gives
500 mA · max recommended output current · p. 5
Current limit
720 mA · typical output current limit, VIN = VOUT(NOM) + 1.0 V · p. 6
Feedback reference
550 mV · typical feedback voltage, TJ = 25°C · p. 6
Dropout
720 mV · typical at 500 mA, 0.65 V ≤ VOUT < 0.8 V · p. 6
Dropout
585 mV · typical at 500 mA, 0.8 V ≤ VOUT < 1.0 V · p. 6
Dropout
420 mV · typical at 500 mA, 1.0 V ≤ VOUT < 1.2 V · p. 6
Dropout
285 mV · typical at 500 mA, 1.2 V ≤ VOUT < 1.5 V · p. 6
Dropout
180 mV · typical at 500 mA, 1.5 V ≤ VOUT < 1.8 V · p. 6
Dropout
140 mV · typical at 500 mA, 1.8 V ≤ VOUT < 2.5 V · p. 6
Dropout
102 mV · typical at 500 mA, 2.5 V ≤ VOUT < 3.3 V · p. 6
Dropout
95 mV · typical at 500 mA, 3.3 V ≤ VOUT ≤ 5.5 V · p. 6
Junction to air (DRV (WSON))
80.3 K/W · junction-to-ambient thermal resistance · p. 5
Junction to board (DRV (WSON))
44.8 K/W · junction-to-board thermal resistance · p. 5
Junction to case (DRV (WSON))
98.7 K/W · junction-to-case top thermal resistance · p. 5
Dropout
130 mV · max at 500 mA, 3.3 V output · p. 1
Junction, hottest
125 °C · maximum junction temperature for reliable operation · p. 14

What it is and has

9
Input voltage range
1.5 V to 6.0 V · p. 1
Adjustable output voltage
0.55 V to 5.5 V · p. 1
Soft-start
Built-in, with monotonic VOUT rise · p. 1
Package option
2-mm × 2-mm WSON-6 (DRV) · p. 1
Package option
SOT23-5 (DBV) · p. 1
Output discharge
Active · p. 1
Protection
foldback current limit, shutdown, thermal protection · p. 13
Enable
active high; connect EN to IN if shutdown is not required · p. 13
Output discharge
active output discharge when disabled · p. 24

Around it

5
cap 1 µF
between IN and GND; Minimum recommended input capacitance; use a ceramic capacitor. · p. 5
cap 1 µF
between OUT and GND; Recommended range 1 to 220 uF; minimum derated capacitance 0.47 uF for stability. Place close to OUT. · p. 5
cap 0.47 µF or larger
between OUT and GND; Required for stability; use X5R or X7R ceramic. Maximum recommended output capacitance is 220 uF. · p. 16
cap 2.2 µF
between IN and GND; Selected value in the typical application; place close to the device. · p. 21
diode Schottky diode
between OUT and IN; External reverse-current protection example; required if reverse current flow is expected. · p. 19

Specifications

57
ParameterConditionsAs printedPage
Voltage VINSupply; over operating free-air temperature rangemin -0.3 · max 6.5 V4
Voltage VENEnable; over operating free-air temperature rangemin -0.3 · max 6.5 V4
Voltage VFBFeedback; over operating free-air temperature rangemin -0.3 · max 2 V4
Voltage VOUTOutput; maximum is VIN + 0.3 V or 6.5 V, whichever is smallermin -0.3 V4
Temperature TJOperating junctionmin -40 · max 150 °C4
Temperature TstgStoragemin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001min -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101min -500 · max 500 V4
Input voltage VINOver operating free-air temperature rangemin 1.5 · max 6 V5
Output voltage VOUTOver operating free-air temperature rangemin 0.55 · max 5.5 V5
Output current IOUTOver operating free-air temperature rangemin 0 · max 500 mA5
Input capacitor CINmin 1 uF5
Output capacitor(1) COUTMinimum derated capacitance of 0.47 uF is required for stabilitymin 1 · max 220 uF5
Enable voltage(2) VENmin 0 · max 6 V5
Enable toggle frequency fENmax 10 kHz5
Junction temperature TJmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJADRV (WSON), 6 PINStyp 80.3 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DRV (WSON), 6 PINStyp 98.7 °C/W5
Junction-to-board thermal resistance RθJBDRV (WSON), 6 PINStyp 44.8 °C/W5
Junction-to-top characterization parameter ψJTDRV (WSON), 6 PINStyp 6.1 °C/W5
Junction-to-board characterization parameter ψJBDRV (WSON), 6 PINStyp 45 °C/W5
Junction-to-case (bottom) thermal resistance RθJC(bot)DRV (WSON), 6 PINStyp 20.8 °C/W5
Feedback voltage VFBTJ = 25°Ctyp 0.55 V6
Output accuracy(1)TJ = 25°C; external feedback resistor tolerances not includedmin -0.7 · max 0.7 %6
Output accuracy(1)–40°C ≤ TJ ≤ +85°C; external feedback resistor tolerances not includedmin -1 · max 1 %6
Output accuracy(1)–40°C ≤ TJ ≤ +125°C; external feedback resistor tolerances not includedmin -1.5 · max 1.5 %6
Line regulationVOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V; VIN = 1.5 V for VOUT < 1.0 Vtyp 2 · max 7.5 mV6
Load regulation0.1 mA ≤ IOUT ≤ 500 mA, VIN ≥ 2.0 Vtyp 0.03 V/A6
Ground current IGNDIOUT = 0 mA; TJ = 25°Cmin 10 · typ 25 · max 31 uA6
Ground current IGNDIOUT = 0 mA; –40°C ≤ TJ ≤ +125°Cmax 35 uA6
Shutdown current ISHDNVEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 Vtyp 0.1 · max 1 uA6
Feedback pin current IFBtyp 0.01 · max 0.1 uA6
Output current limit ICLVIN = VOUT(NOM) + 1.0 V; VOUT = VOUT(NOM) – 0.2 V, VOUT < 1.5 Vmin 530 · typ 720 · max 865 mA6
Output current limit ICLVIN = VOUT(NOM) + 1.0 V; VOUT = 0.9 V × VOUT(NOM), VOUT ≥ 1.5 Vmin 530 · typ 720 · max 865 mA6
Short-circuit current limit ISCVIN = VOUT(NOM) + 1.0 V; VOUT = 0 Vtyp 350 mA6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 0.65 V ≤ VOUT < 0.8 Vtyp 720 · max 880 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 0.8 V ≤ VOUT < 1.0 Vtyp 585 · max 750 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.0 V ≤ VOUT < 1.2 Vtyp 420 · max 570 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.2 V ≤ VOUT < 1.5 Vtyp 285 · max 400 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.5 V ≤ VOUT < 1.8 Vtyp 180 · max 235 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.8 V ≤ VOUT < 2.5 Vtyp 140 · max 185 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 2.5 V ≤ VOUT < 3.3 Vtyp 102 · max 140 mV6
Dropout voltage VDOIOUT = 500 mA, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 3.3 V ≤ VOUT ≤ 5.5 Vtyp 95 · max 130 mV6
Power-supply rejection ratio PSRRVIN = VOUT(NOM) + 1.0 V, IOUT = 50 mA; f = 1 kHztyp 50 dB6
Power-supply rejection ratio PSRRVIN = VOUT(NOM) + 1.0 V, IOUT = 50 mA; f = 100 kHztyp 45 dB6
Power-supply rejection ratio PSRRVIN = VOUT(NOM) + 1.0 V, IOUT = 50 mA; f = 1 MHztyp 30 dB6
Output noise voltage VnBW = 10 Hz to 100 kHz, VOUT = 0.9 Vtyp 53 uVRMS6
Undervoltage lockout VUVLOVIN risingmin 1.21 · typ 1.33 · max 1.47 V6
Undervoltage lockout VUVLOVIN fallingmin 1.17 · typ 1.29 · max 1.42 V6
Undervoltage lockout hysteresis VUVLO,HYSTVIN Hysteresistyp 40 mV6
Start-up time tSTRFrom EN low-to-high transition to VOUT = VOUT(NOM) × 95%typ 500 us6
EN pin high voltage VEN(HI)min 1 V6
EN pin low voltage VEN(LO)max 0.3 V6
Enable pin current IENVIN = EN = 6.0 Vtyp 10 nA6
Pulldown resistance RPULL DOWNVIN = 6.0 Vtyp 95 Ω6
Thermal shutdown TSDShutdown, temperature increasingtyp 170 °C6
Thermal shutdown TSDReset, temperature decreasingtyp 155 °C6

Pins, by the datasheet

7
1 OUT
Regulated output; requires a capacitor to ground for stability, placed close to the output. · p. 3
2 FB
Control loop error amplifier input used to set the output voltage. · p. 3
3 GND
Ground pin. · p. 3
4 EN
Drive above VEN(HI) to enable the regulator and below VEN(LO) for shutdown. · p. 3
5 DNC
Do not connect. · p. 3
6 IN
Supply input; connect the recommended or larger ceramic capacitor from IN to ground. · p. 3
Pad Thermal pad
Connect to a large area GND plane for improved thermal performance. · p. 3

Ordering codes, by the datasheet

12
TLV75801PDBVJ
SOT-23 (DBV) · Adjustable output; 5 pins; 8000, JUMBO T&R · p. 26
TLV75801PDBVJ.A
SOT-23 (DBV) · Adjustable output; 5 pins; 8000, JUMBO T&R · p. 26
TLV75801PDBVR
SOT-23 (DBV) · Adjustable output; 5 pins; 3000, LARGE T&R; NIPDAU or SN lead finish · p. 26
TLV75801PDBVR.A
SOT-23 (DBV) · Adjustable output; 5 pins; 3000, LARGE T&R; NIPDAU lead finish · p. 26
TLV75801PDBVT
SOT-23 (DBV) · Adjustable output; 5 pins; 250, SMALL T&R; NIPDAU or SN lead finish · p. 26
TLV75801PDBVT.A
SOT-23 (DBV) · Adjustable output; 5 pins; 250, SMALL T&R; NIPDAU lead finish · p. 26
TLV75801PDRVR
WSON (DRV) · Adjustable output; 6 pins; 3000, LARGE T&R · p. 26
TLV75801PDRVR.A
WSON (DRV) · Adjustable output; 6 pins; 3000, LARGE T&R · p. 26
TLV75801PDRVRG4
WSON (DRV) · Adjustable output; 6 pins; 3000, LARGE T&R · p. 26
TLV75801PDRVRG4.A
WSON (DRV) · Adjustable output; 6 pins; 3000, LARGE T&R · p. 26
TLV75801PDRVT
WSON (DRV) · Adjustable output; 6 pins; 250, SMALL T&R · p. 26
TLV75801PDRVT.A
WSON (DRV) · Adjustable output; 6 pins; 250, SMALL T&R · p. 26

Open-source boards using it

39See all 39
  • 4 layers50.9 × 63.2 mmLego gameboy main, the printed circuit board in 3D

    Lego gameboy main

    greigs/OpenBrickGB

    Functional / Playable Lego Game Boy Electronics - PCB Design Files

    56 parts15
  • 4 layers25.4 × 62.7 mmESP32 Board, the printed circuit board in 3D

    ESP32 Board

    Fred98246/ESP-32-Dev-Board

    Custom ESP32-S3-MINI-1 development board

    27 parts2MIT
  • 4 layers58.5 × 26.5 mmEsp32s3-bms, the printed circuit board in 3D

    Esp32s3-bms

    amar-jay/kicad-templates

    amarjay's kicad templates

    32 parts1
  • 4 layers34 × 50 mmESP32 Controller, the printed circuit board in 3D

    ESP32 Controller

    caggieb/ESP32-controller-WIP

    Design of an ESP32 based controller with IMU, from PCB to software

    36 parts1
  • 4 layers44.5 × 62.8 mmESP32-Sen, the printed circuit board in 3D

    ESP32-Sen

    SendhanS/ESP32-Sen

    A compact ESP32-S3-MINI-1-N8 development board with USB-C (ESD protected), a 4-layer PCB stack-up (signal / GND / power / signal), and 3.3 V regulation using the TLV75801.

    33 parts1CC0-1.0
  • 2 layers50.5 × 50.5 mmSTMF401CCU6, the printed circuit board in 3D

    STMF401CCU6

    SendhanS/STMF401CCU6-board

    STM32F4 series breakout board

    39 parts1MIT
  • 4 layers26.4 × 56.8 mmESP32 Dev module, the printed circuit board in 3D

    ESP32 Dev module

    andresmoreno2702-gif/ESP32-S3-Dev-Board-Project

    All KICAD Files and Schematics

    26 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV75801PDRV?

Yes. The symbol is Regulator_Linear:TLV75801PDRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV75801PDRV?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the TLV75801PDRV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV75801PDRV?

JLCPCB lists it as part C2876308, with 3,085 in stock; the sellers' links on this page open their listings.

What can replace the TLV75801PDRV?

Parts like it in the library: the TLV76733DRVR by Texas Instruments, the TLV75533PDRV by Texas Instruments, the LP5912-3.3DRVR by Texas Instruments and the LP5912-1.8DRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV75801PDRV?

39 boards in 37 repositories on GitHub; the most starred are listed on this page, with their KiCad files.