Skip to the content
1234567

TLV76701DRV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.5V@(1A) 16V 1A 50uA 60uVrms 70dB@(1kHz) Adjustable Over Current Protection、Over Temperature Protection、Soft Start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV76701DRV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6-EP(2x2)
Pins
6
In stock
1,862 at JLCPCB (C2863998)
Used on
1 open-source board

Overview

The TLV76701DRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 1.5V@(1A) 16V 1A 50uA 60uVrms 70dB@(1kHz) Adjustable Over Current Protection、Over Temperature Protection、Soft Start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV76701DRVx, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 1,862 are in stock at JLCPCB (part C2863998). 1 open-source board in 1 repository on GitHub use it.

Symbol

1OUT2FB3GND4EN6IN7PAD
Regulator_Linear:TLV76701DRVxFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

From the datasheet

16
Supply, least
2.5 V · VIN, recommended operating min · p. 5
Supply, most
16 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
18 V · VIN, absolute max · p. 5
Junction, hottest
150 °C · Junction temperature, absolute max · p. 5
Takes working
50 µA · Quiescent current, IOUT = 0 mA, typical · p. 6
Takes asleep
1.5 µA · Shutdown current, VEN ≤ 0.4 V, VIN = 16 V, typical · p. 6
Gives
800 mA · Continuous output, 2.5 V ≤ VIN < 3 V, max · p. 5
Gives
1 A · Continuous output, VIN ≥ 3 V, max · p. 5
Current limit
1.1 A · Output current limit, VOUT = 0.9 × nominal, VIN ≥ 3 V, min · p. 6
Current limit
810 mA · Output current limit, VOUT = 0.9 × nominal, 2.5 V ≤ VIN < 3 V, min · p. 6
Feedback reference
800 mV · Feedback voltage, typical · p. 6
Dropout
900 mV · DRV, VIN ≥ 3 V, IOUT = 1 A, typical · p. 6
Dropout
800 mV · 2.5 V ≤ VIN < 3 V, IOUT = 800 mA, typical · p. 6
Junction to air (DRV (WSON))
77.7 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (DRV (WSON))
40.8 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (DRV (WSON))
92.3 K/W · Junction-to-case top thermal resistance · p. 6

What it is and has

5
Adjustable output voltage
0.8V to 14.6V · p. 1
Output accuracy
1% over load and temperature · p. 1
Soft start
500µs typical · p. 1
Protection
Foldback current limit and thermal protection · p. 1
Package
6-pin 2mm × 2mm WSON · p. 1

Around it

3
cap 1 µF
between IN and GND; Nominal input capacitor; place as close to IN and GND as possible. · p. 5
cap 2.2 µF
between OUT and GND; Nominal output capacitor; recommended range 1–220 uF; place as close to OUT and GND as possible. · p. 5
cap 10 pF
between OUT and FB; Nominal feed-forward capacitor for adjustable device; optional unless feedback divider current is below 5 uA. · p. 5

Specifications

54
ParameterConditionsAs printedPage
Voltage VINWith respect to GNDmin -0.3 · max 18 V5
Voltage VSNSWith respect to GND; maximum VIN + 0.3 V or 18 V, whichever is smallermin -0.3 V5
Voltage VFBWith respect to GNDmin -0.3 · max 3 V5
Voltage VENWith respect to GNDmin -0.3 · max 18 V5
Operating junction (TJ) TJmin -50 · max 150 °C5
Storage (TSTG) TSTGmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; value ±3000 Vmax 3000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; value ±1000 Vmax 1000 V5
Input voltage VINmin 2.5 · max 16 V5
Enable voltage VENmin 0 · max 16 V5
Output voltage VOUTAdjustable devicemin 0.8 · max 14.6 V5
Output current (2.5 V ≤ VIN < 3 V) IOUT2.5 V ≤ VIN < 3 Vmin 0 · max 0.8 A5
Output current (VIN ≥ 3 V) IOUTVIN ≥ 3 Vmin 0 · max 1 A5
Output capacitor COUT2.2 uF is NOM; effective output capacitance of 0.5 uF minimum required for stabilitymin 1 · typ 2.2 · max 220 uF5
Output capacitor ESR COUT ESRmin 2 · max 500 mΩ5
Input capacitor CIN1 uF is NOMtyp 1 uF5
Feed-forward capacitor CFFOptional, for adjustable device only; 10 pF is NOM; required for stability if feedback divider current < 5 uAtyp 10 pF5
Feedback divider current IFB_DIVIDERAdjustable device only; CFF required for stability below 5 uAmin 5 uA5
Junction temperature TJmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJADRV (WSON), 6 PINStyp 77.7 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DRV (WSON), 6 PINStyp 92.3 °C/W6
Junction-to-board thermal resistance RθJBDRV (WSON), 6 PINStyp 40.8 °C/W6
Junction-to-top characterization parameter ΨJTDRV (WSON), 6 PINStyp 4.3 °C/W6
Junction-to-board characterization parameter ΨJBDRV (WSON), 6 PINStyp 40.8 °C/W6
Junction-to-case (bottom) thermal resistance RθJC(bot)DRV (WSON), 6 PINStyp 18.9 °C/W6
Nominal output accuracy VOUTTJ = 25°Cmin -0.5 · max 0.5 %6
Output accuracy over temperature VOUTVIN ≥ 3.0 V, 1 mA ≤ IOUT ≤ 1 Amin -1 · max 1 %6
Output accuracy over temperature VOUT2.5 V ≤ VIN < 3.0 V, 1 mA ≤ IOUT ≤ 800 mAmin -1 · max 1 %6
Feedback voltage VFBtyp 0.8 V6
Internal reference (adjustable device) VREFTJ = 25ºCmin -0.5 · max 0.5 %6
Internal reference (adjustable device) VREFTJ = –40°C to 125°Cmin -1 · max 1 %6
Feedback pin current IFBVFB = 1 Vtyp 10 · max 50 nA6
Line regulation ΔVOUT(ΔVIN)VOUT(NOM) +1.5 V ≤ VIN ≤ 16 V, IOUT = 10 mAmax 0.02 %/V6
Load regulation ΔVOUT(ΔIOUT)1 mA ≤ IOUT ≤ 1 A, VIN ≥ 3.0 Vtyp 0.1 · max 0.5 %/A6
Load regulation ΔVOUT(ΔIOUT)1 mA ≤ IOUT ≤ 800 mA, 2.5 V ≤ VIN < 3.0 Vtyp 0.1 · max 0.5 %/A6
Dropout voltage VDOVIN ≥ 3.0V, IOUT = 1 A, DRV package; adjustable device measured with VFB = 95% x VFB(nom)typ 0.9 · max 1.4 V6
Dropout voltage VDO2.5 V ≤ VIN < 3.0 V, IOUT = 800 mA; adjustable device measured with VFB = 95% x VFB(nom)typ 0.8 · max 1.3 V6
Output current limit ICLVOUT = 0.9 x VOUT(NOM), VIN ≥ 3.0Vmin 1.1 · max 1.6 A6
Output current limit ICLVOUT = 0.9 x VOUT(NOM), 2.5 V ≤ VIN < 3.0 Vmin 0.81 · max 1.6 A6
Short-circuit current limit ISCVOUT = 0 V, DRV packagemin 150 · typ 250 · max 350 mA6
Quiescent current IQIOUT = 0 mAtyp 50 · max 80 uA6
Ground current IGNDIOUT = 1 A, VIN ≥ 3.0 Vtyp 1.5 mA6
Shutdown current ISHUTDOWNVEN ≤ 0.4 V, VIN = 16 Vtyp 1.5 · max 3 uA6
Enable pin logic high VEN(HIGH)2.5 V ≤ VIN ≤ 16 Vmin 1.2 V6
Enable pin logic low VEN(LOW)2.5 V ≤ VIN ≤ 16 Vmax 0.4 V6
Enable pullup current IENVEN = 0 Vtyp 400 nA6
Output pulldown current IPULLDOWNVIN = 16 V, VOUT = 2.5 V, VEN=0Vtyp 1.2 mA6
Power-supply rejection ratio PSRRVIN = 3.3 V, VOUT = 1.8 V, IOUT = 300 mA, f = 120 Hztyp 70 dB6
Output noise voltage VnBW = 10 Hz to 100 kHz, VIN = 3.3 V, VOUT = 0.8 V, IOUT = 100 mAtyp 60 uVRMS6
UVLO threshold rising VUVLO+VIN risingtyp 2.2 · max 2.4 V6
UVLO hysteresis VUVLO(HYS)typ 130 mV7
UVLO threshold falling VUVLO-VIN fallingmin 1.9 V7
Thermal shutdown temperature TSD(shutdown)Temperature increasingtyp 180 ºC7
Thermal shutdown reset temperature TSD(reset)Temperature fallingtyp 160 ºC7

Pins, by the datasheet

7
1 OUT
Output; place the recommended output capacitor as close to OUT and GND as possible. · p. 4
2 FB
Feedback input to the control-loop error amplifier; set output voltage with external resistors and do not float. · p. 4
3 GND
Ground; must be grounded. · p. 4
4 EN
High enables and low disables; internal pullup allows floating to enable, or connection to IN. · p. 4
5 GND
Ground; must be grounded. · p. 4
6 IN
Input; place the recommended input capacitor as close to IN and GND as possible. · p. 4
Pad Thermal pad
Connect to ground or leave floating; connect to a large-area ground plane for best thermal performance. · p. 3

Open-source boards using it

1
  • 4 layers70.1 × 65.2 mmSolar debug board, the printed circuit board in 3D

    Solar debug board

    stellarcorp/tvsc

    Core software repository for the Tennessee Valley Stellar Corporation

    33 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV76701DRV?

Yes. The symbol is Regulator_Linear:TLV76701DRVx and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV76701DRV?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the TLV76701DRV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV76701DRV?

JLCPCB lists it as part C2863998, with 1,862 in stock; the sellers' links on this page open their listings.

What can replace the TLV76701DRV?

Parts like it in the library: the TLV76733DRVR by Texas Instruments, the TLV76750DRV by Texas Instruments, the TLV75718PDRV by Texas Instruments and the TLV75709PDRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV76701DRV?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.