

Esp32s3-bms
amarjay's kicad templates
- Size
- 58.5 × 26.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 68
- Pads
- 216
- Tracks, vias
- 351, 87
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Dec 2025
- Updated
- 30 Dec 2025
Overview
Esp32s3-bms is an open-source printed circuit board by amar-jay, from the amar-jay/kicad-templates repository on GitHub. It is a 4-layer board of 58.5 × 26.5 mm with 32 parts on 68 nets, routed with 351 tracks and 87 vias.
It is built around the ESP32-S3-MINI-1-N8, BQ24072RGTR and TLV75801PDRV, with the B2B-PH-K-S and ESD7104MUTAG among its other parts. Its parts include 10 resistors, 5 capacitors, 4 diodes, 3 ICs and 3 connectors. It belongs with the power boards and the ESP32 boards of this library.
Main components
5ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesBQ24072RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1 1.5A 1.5mA 4.2V 4.35V~6.6V Charging IC Lithium Battery Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementTLV75801PDRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 31uA 500mA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB2B-PH-K-S
插件,P=2mmUncategorisedJSTESD7104MUTAG
DFN2510-10-55℃~+125℃ 0.2pF、0.4pF 18V 200nA 3A@8/20us 5V 60W@8/20us 7.5V Four channels IEC 61000-4-2、IEC 61000-4-5 DFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdKiCad Templates
[!NOTE] This is a fork of the original KiCad Templates repository to provide updated templates for KiCad 9.0 and later versions. This fork includes templates designed for specific manufacturers, usecases and inmproved aesthetics. It is personally maintained by amar-jay.
This repository contains the official KiCad project and worksheet templates.
Contribution guidelines can be found at http://kicad.org/libraries/contribute The library convention can be found at http://kicad.org/libraries/klc/
Other KiCad library repositories are located:
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | C | Capacitor_SMD:C_0603_1608Metric | 0u1F1, 0u1F2, C1, C8, C9 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C6, C7 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 1k5R | Resistor_SMD:R_0201_0603Metric | R6, R7 |
| 2 | 1kR | Resistor_SMD:R_0201_0603Metric | R3, R4 |
| 2 | 47kR | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | 4u7F | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | R | Resistor_SMD:R_0201_0603Metric | R8, R9 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 1 | 10kR | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | 1k | Resistor_SMD:R_0201_0603Metric | R10 |
| 1 | B2B-PH-K-S | libs:B2BPHKS | J3 |
| 1 | BQ24072RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | ESD7104MUTAG | libs:ESD8104MUTAG | D1 |
| 1 | ESP32-S3-MINI-1 | RF_Module:ESP32-S2-MINI-1 | U3 |
| 1 | TLV75801PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 4 layers52 × 31 mm

- 4 layers50.9 × 63.2 mm

Lego gameboy main
greigs/OpenBrickGB
Functional / Playable Lego Game Boy Electronics - PCB Design Files
56 parts15 - 2 layers

Grad project
Eng-Youssef-Yassin/sos-wearable-device
A wearable safety device for industrial environments. A worker wears a UWB tag; fixed anchor stations track its position in real time and a web dashboard shows where every worker is.
44 parts - 4 layers44.5 × 62.8 mm

ESP32-Sen
SendhanS/ESP32-Sen
A compact ESP32-S3-MINI-1-N8 development board with USB-C (ESD protected), a 4-layer PCB stack-up (signal / GND / power / signal), and 3.3 V regulation using the TLV75801.
33 parts1CC0-1.0 - 4 layers25.8 × 62.7 mm

PulseboardS3
I-s-h-a-n-C/PulseboardS3
This is an ESP32 S3 Devboard, designed to be used in conjunction with EMGs and EKGs. As with all ESP32S3 Devboards, it has WiFi and Bluetooth capibilities.
31 parts - 4 layers38.3 × 33.5 mm

- 4 layers42 × 72 mm

- 4 layers30 × 61.1 mm

Meshtastic LoRa
BirryGit/Battery-Powered-Meshtastic-Board
I want to learn how to make PCBs, and this seemed like a good idea. I originally was following the Stasis tutorial, but veered away from it significantly. I want to get into meshtastic, so this is awesome :)
31 parts
Questions
How big is the Esp32s3-bms PCB?
It measures 58.5 × 26.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp32s3-bms use?
32 parts, built around the ESP32-S3-MINI-1-N8, BQ24072RGTR, TLV75801PDRV and B2B-PH-K-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32s3-bms KiCad files?
From the amar-jay/kicad-templates repository on GitHub, at the commit this page was made from: the board is Projects/esp32s3-bms/esp32s3-bms.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32s3-bms design in my own project?
Its repository states no licence, so its author keeps all rights: ask amar-jay before reusing the design.