2 layers150 × 100 mm
Rps01
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
174 parts
2 layers150 × 100 mm
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
- Size
- 150 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 182
- Nets
- 115
- Pads
- 574
- Tracks, vias
- 2,007, 489
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Mar 2023
- Updated
- 12 Dec 2023
Overview
Rps01 is an open-source printed circuit board by Kenkneeshio, from the Kenkneeshio/SeniorDesign-Team9 repository on GitHub. It is a 2-layer board of 150 × 100 mm with 182 parts on 115 nets, routed with 2,007 tracks and 489 vias.
It is built around the DS18B20+, INA139QPWRQ1 and UA741CDT, with the NP100P04PLG-E1-AY, ADR02AUJZ-REEL7 and B0540W among its other parts. Its parts include 52 resistors, 40 capacitors, 17 ICs, 14 diodes and 5 fuses.
Main components
10
DS18B20+
TO-92-55℃~+125℃ 12bit 1uA 3V~5.5V 750ms Single bus Temperature threshold monitoring、Configurable temperature output、On-chip non-volatile parameter storage ±0.5℃ TO-92 Temperature Sensors ROHSMaxim Integrated (Analog Devices)Temperature Sensors
INA139QPWRQ1
TSSOP-8-40V~2V -40℃~+125℃ 1 10uA 115dB 1uV/℃ 2.7V~40V 2.7V~40V 200uV 440kHz 60uA High-side detection、Analog output interface TSSOP-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
UA741CDT
SO-8-22V~22V 0℃~+70℃ 1 1.7mA 1MHz 200uA 23nV/√Hz@1kHz 2nA 40mA 500V/ms 5V~40V 6mV 90dB Built-in compensation SO-8 Operational Amplifier ROHSSTMicroelectronicsOperational Amplifier
NP100P04PLG-E1-AY
TO-263-55℃~+175℃ 1 P-Channel 1.13nF 100A 15.1nF 2.5V 200W 320nC@32V 40V 5.1mΩ@4.5V P-Channel TO-263 MOSFETs ROHSRenesas ElectronicsMOSFETs
ADR02AUJZ-REEL7
TSOT-23-5-40℃~+125℃@(Ta) 10mA 10uVp-p 1mA 25ppm/℃ 5V 7V~36V Fixed Series ±0.1% TSOT-23-5 Voltage Reference ROHSAnalog DevicesVoltage Reference
B0540W
SOD-123-55℃~+125℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHShongjiachengSchottky DiodesB0540W-7-F-HXY
SOD-123SOD-123 Schottky Diodes ROHSHXY MOSFETSchottky Diodes
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
MM3Z5V1ST1G-CN
SOD-3231 Independent 200mW 2uA@2V 4.8V~5.4V 480Ω 5.1V 60Ω SOD-323 Zener Diodes ROHSChipNoboZener Diodes
SSB43L-E3/52T
DO-214AA-55℃~+125℃ 1 Independent 120A 200uA@40V 40V 450mV 5A DO-214AA Schottky Diodes ROHSTokmasSchottky Diodes
README
README.mdSeniorDesign-Team9
Currently the GitHub Repo ignores .zip and .raw to save space
Parts
182| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C11, C12, C13, C39, C40, C41 |
| 6 | 0 | Resistor_SMD:R_0603_1608Metric | R1, R2, R9, R35, R38, R39 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6 |
| 6 | NP100P04PLG-E1-AY | Mechatronic Footprints:LTC3780_PRSS0004AL-A_REN | U2, U3, U4, U5, U6, U7 |
| 5 | 4.7K | Resistor_SMD:R_0603_1608Metric | R42, R43, R44, R54, R55 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R36, R37, R40, R41 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 0 DNI | Resistor_SMD:R_0603_1608Metric | R23, R32, R34 |
| 3 | 10u 35V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C24, C26, C28 |
| 3 | 22u 16V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C34, C36, C38 |
| 3 | 5 | Mechatronics Fuses:0154Series_LTF | F3, F4, F5 |
| 2 | .22u 16V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C19, C20 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R49, R50 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R25, R26 |
| 2 | 0.22u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 1.2M | Resistor_SMD:R_1206_3216Metric | R45, R46 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R31 |
| 2 | 100 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15 |
| 2 | 100u | Capacitor_SMD:CP_Elec_8x10 | C14, C21 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R16, R29 |
| 2 | 220u | Capacitor_SMD:CP_Elec_8x10 | C18, C31 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 4.7K DNI | Resistor_SMD:R_0603_1608Metric | R24, R33 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 510K | Resistor_SMD:R_1206_3216Metric | R47, R48 |
| 2 | 99999 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | ADR02AUJZ-REEL7 | Mechatronic Footprints:ADR02AUJZ_REEL7_UJ_5_ADI | U10, U11 |
| 2 | B0540W | Mechatronic Footprints:CR_SMA_320-340AE_DIO | D9, D10 |
| 2 | B0540W-7-F | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | DS18B20+ | Package_TO_SOT_THT:TO-92L_Inline | U18, U19 |
| 2 | INA139QPWRQ1 | Mechatronic Footprints:INA139_PW8 | U8, U22 |
| 2 | LM340MPX-5.0/NOPB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12, U13 |
| 2 | LOGO | Mechatronic Footprints:mechatronics | G***, G*** |
| 2 | MM3Z5V1ST1G | Diode_SMD:D_SOD-323 | D3, D4 |
| 2 | MMSZ5247BT1G | Diode_SMD:D_SOD-123 | D13, D14 |
| 2 | SSB43L-E3/52T | Mechatronic Footprints:SSB43L-E352T_DIODE_DO214AA_MBRS | D6, D12 |
| 2 | S_DIODE_10A | Diode_SMD:D_PowerDI-5 | D7, D8 |
| 2 | UA741CDT | Mechatronic Footprints:UA741CDT_D8_TEX_STM | U20, U21 |
| 1 | .22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C23 |
| 1 | 0 | Mechatronic Footprints:CSS2H-5930R | R52 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 0.01u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C32 |
| 1 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C35 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 0.3m | Mechatronic Footprints:CSS2H-5930R | R5 |
| 1 | 0.47u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27 |
| 1 | 10.25n OR DNI | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 100 RED | Resistor_SMD:R_0603_1608Metric | RRED1 |
| 1 | 10000p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C29 |
| 1 | 1000p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C27 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 10u | Mechatronic Footprints:IND_410680_WRE | L2 |
| 1 | 113K 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 1 | 12.4K 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20 |
| 1 | 150 Blue | Resistor_SMD:R_0603_1608Metric | RBLUE1 |
| 1 | 150 Green | Resistor_SMD:R_0603_1608Metric | RGREEN1 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 16M | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C33 |
| 1 | 2 | Mechatronics Fuses:0154Series_LTF | F1 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 25m 2% | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R13 |
| 1 | 3 | Mechatronics Fuses:0154Series_LTF | F2 |
| 1 | 3.16k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 3.3V NCV1117ST33T3G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U14 |
| 1 | 3.3n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16 |
| 1 | 3.65n | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 30K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 1 | 36V Zener | Diode_SMD:D_SOD-123 | D11 |
| 1 | 37u | Mechatronic Footprints:PE-53932SNLT_IND_HCI-44_PUL | L3 |
| 1 | 3m | Mechatronic Footprints:CSS2H-5930R | R51 |
| 1 | 4.7V Zener | Diode_SMD:D_SOD-123 | D5 |
| 1 | 4.7u Low ESR | Mechatronic Footprints:LOWESRCAPMP7.6X4.3_3.1N_KEM | C37 |
| 1 | 47.5K 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | 47p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C25 |
| 1 | 51K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
The 148 most common of 182 parts.
More from Kenkneeshio/SeniorDesign-Team9
12- 2 layers150 × 100 mm
Rps01
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
124 parts - 2 layers59.6 × 54 mm
KENESP32LTC370TEST
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
49 parts - 2 layers104.1 × 73.7 mm
19V 10A Standalone
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
35 parts - 2 layers49.4 × 39.7 mm
Mcu singleside
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
22 parts - 2 layers49.4 × 37.3 mm
MCU2
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
20 parts - 2 layers157.5 × 142.2 mm
Current Test Bench
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
16 parts - 2 layers43.2 × 38.1 mm
M MUC
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
13 parts - 2 layers89.7 × 56.4 mm
/Buck%20Converter/Buck%20Converter.kicad_pcb.jpg?size=s&soon)
Buck Converter
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
10 parts - 2 layers100.8 × 73.6 mm
/Current%20Sense%20Standalone.kicad_pcb.jpg?size=s&soon)
Current Sense Standalone
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
9 parts - 2 layers62.3 × 24.3 mm
Current Sense Standalone
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
9 parts - 2 layers35.4 × 19.6 mm
RGB
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
5 parts
Similar boards
- 2 layers25 × 25 mm
KiwiEFI Hall 0.1
Neil427/Speeduino-Hall-Trigger-Conditioner
Speeduino Hall sensor conditioner board with buffering
38 parts4GPL-3.0 - 4 layers45.3 × 40.1 mm
ESP32-Modular Board
bgb-0/TUe-CBL-Circular-Electronics
A simple and compact bluetooth audio PCB for the TU/e Multidiscplinary CBL track "Circular Electronics"
64 parts2CERN-OHL-P-2.0 - 2 layers29.6 × 28 mm
- 2 layers35 × 31.3 mm
- 2 layers87 × 87 mm
Esp thermostat
tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.
59 parts7GPL-3.0 - 2 layers75 × 65 mm
PEE50 voltametrie
erwinkooiman/SquareWaveVoltammetry
miniaturized potentiostat with web interface
48 parts1 - 2 layers63.5 × 101.6 mm
- 2 layers72.8 × 38 mm
Questions
How big is the Rps01 PCB?
It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rps01 use?
182 parts, built around the DS18B20+, INA139QPWRQ1, UA741CDT and NP100P04PLG-E1-AY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rps01 KiCad files?
From the Kenkneeshio/SeniorDesign-Team9 repository on GitHub, at the commit this page was made from: the board is KiCad/RPS01-Revision 2/rps01.kicad_pcb and its schematic KiCad/19V 10A Standalone/19V 10A Standalone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rps01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kenkneeshio before reusing the design.