
SCART switcher
nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

UND ARC Launch Vehicle for Spaceport America Cup 2024
VULCAN REVB is an open-source printed circuit board by UND-ARC, from the UND-ARC/IREC-ARC-2024 repository on GitHub, published under the MIT licence. It is a 2-layer board of 63.5 × 101.6 mm with 63 parts on 78 nets, routed with 256 tracks and 201 vias.
It is built around the MAX31850KATB+T, DS18B20+ and MPXV7002DP, with the DEV-16996, CC0805JRX7R9BB103 and CC0805JRX7R9BB104 among its other parts. Its parts include 14 capacitors, 11 resistors, 8 connectors, 7 ICs and 4 diodes.
UND ARC Launch Vehicle for Spaceport America Cup 2024
Link to Hardware List [WIP]
git lfs install. This will enable the large file support.Since files are stored as binary (unreadable to humans) it is important that no two file have a merge conflict. This can be done by "locking" a file when we edit it which prevents others from making changes to it at the same time.
To Lock a file, right click in the folder the file is in and select "Git bash here". Then enter the command:
git lfs lock FILENAME.Ext
To Unlock a file use the command:
git lfs unlock FILENAME.Ext
The command ls will list all the files in the current folder if you don't know the extension. To see all the files that are currently locked, git lfs locks will list who has locked what.
To sumarize the editing process:
git lfs lock FILENAMEgit add FILENAME or git add --allgit commit -m 'MESSAGE GOES HERE'git pull and git push the new commits to the server (Contact Neko'z or Galbatorix if you get an error!)git lfs unlock FILENAMEYay!
WIP
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C11, C12, C13 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C14, C15, C16 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R13, R14, R15 |
| 4 | Jumper_2_Open | CustomFootprintLib:SolderJumper | JP3, JP4, JP5, JP6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | LOGO | LOGO | G***, G***, G1 |
| 3 | MAX31850KATB+T | CustomFootprintLib:SON50P300X400X80-11N | U6, U7, U8 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | Screw_Terminal_01x06 | CustomFootprintLib:TERMBLOCK_OSTTE060104 | J7, J8 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 1.0uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 300k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 41.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 6.8uH | CustomFootprintLib:IND_SRN8040TA-6R8M | L1 |
| 1 | 62 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AP63357QZV-7 | CustomFootprintLib:AP63356 (V-DFN3020-13) | U4 |
| 1 | BAT165AX | Diode_SMD:D_SOD-323_HandSoldering | D4 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | CMD17-21VGD/TR8 | Skyhawkson_Footprints:OSRAM_0805 | D2 |
| 1 | CMD17-21VRD/TR8 | Skyhawkson_Footprints:OSRAM_0805 | D1 |
| 1 | DS18B20+ | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | MPXV7002DP | SnapEDA Library:XDCR_MPXV7002DP | U3 |
| 1 | POWER | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | SPHV12-01ETG-C | PCM_Diode_SMD_Handsoldering_AKL:D_SOD-882_DFN1006-2_TVS | D3 |
| 1 | SPI | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Serial | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Teensy 4.1 | CustomFootprintLib:MODULE_DEV-16771 | U5 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | XT60PW-M | CustomFootprintLib:AMASS_XT60PW-M | J1 |

nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

RensselaerMotorsport/RM28-Tractive-System
Tractive System for 2024-2025 competition car

SmallCoral/c5-car
用 KiCad 10 打开 CoralC5-Expansion.kicadpro。这是 Coral-C5 的单槽扩展板,顶部 J14 接核心板,左右 J9、J8 各一组 2×24 排针,下方放 RJ45 和 microSD,右侧放 ESP32-C3-MINI-1U。100×86mm 板框为本项目暂定尺寸。

BerkeleyLab/Marble
Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.


Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.

perja12/preheating_station_controller
Controller for the Youyue 946c preheating station.

Alksndr55/mesh-repeater-2.0
Mesh Repeater v2 — LoRa-репитер для MeshCore и Meshtastic на платах POWER и LOGIC с экраном SHIELD, 90×60 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах.
It measures 63.5 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the MAX31850KATB+T, DS18B20+, MPXV7002DP and DEV-16996. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UND-ARC/IREC-ARC-2024 repository on GitHub, at the commit this page was made from: the board is payload/boards/VULCAN_REVB/VULCAN_REVB.kicad_pcb and its schematic payload/boards/ARGUS/ARGUS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).